Abstract
A review is made of the advances which have been made in creep mechanics in the last decade. Both deformation and failure are considered and an attempt has been made to indicate the influences that the recent advances have had on the development of design rules.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Ainsworth, R. A., 1976, Int. J. Mech. Sci., Vol. 18.
Ainsworth, R. A., 1977a, GEGB, Berkeley Nuclear Laboratories Report, Rd/B/H 3895.
Ainsworth, R. A., 1977b, Int. J. of Solids and Structures, Vol. 13.
Ainsworth, R. A. and Goodall, I. W., 1978, Int. J. Mech. Sci., Vol. 20.
Ashby, M. F., 1972, Acta. Metall. 20.
Ashby, M. F. and Raj, 1975, Proc. Conf. Mechs. and Physics of Metals, Inst. of Physics, Cambridge.
Bilde-Sorenson, J. S., 1978, Phil. Mag., A 38.
Bodner, S. R., Partom, I. and Partom, Y., 1979, J. Appl. Mechanics, 46.
Bree, J., 1968, J. Strain Analysis, Vol 3.
Calladine, C. R., 1964, Proc. Inst. Mech. Engr., Vol. 178.
Chaboche, J. L., 1974, Revue Francaise de Mechanique, No. 50–51.
Cocks, A. C. F., and Ashby, M. F., 1980, UITAM Symposium Creep of Structures, Liecester.
Davis, P. W., Nelmes, G., Williams, K. R. and Wilshire, A., 1973, Metal Sciences J., Vol. 17.
Dyson, B. F., Loveday, M. S. and Rodgers, M. S., 1976, Proc. Royal Soc. Lond., A349.
Dyson, B. F., and McLean, D., 1977, Metal Science, 37.
Goodall, I. W. and Cockroft, R. D. H., 1973, Int. J. Mechanical Sci., Vol. 15.
Goodall, I. W., and Ainsworth, R. A., 1977, Proc.Third Int.Conf. on Pressure Vessel Technology, Tokyo, ASME, Vol. II.
Goodman, A. M., 1979, Chap. 11, Creep of Engineering Materials and Structures, (Editors, G. Bernasconi and G. Piatti), Applied Science Publishers, London.
Greenwood, G., 1973, Proc. Int. Congress on Metals, The Design of Alloys, Vol. 2., Cambridge.
Harper, M. P., and Ellison, 1977, J. Strain Analysis 12.
Hart, E. W., 1976, ASME, J. Eng. Materials and Technology, Vol. 98.
Hayhurst, D. R., Dimmer, P. R., and Chernnka, M. W., 1975, J. Mech. and Phys. of Solids, Vol. 23.
Hayhurst, D. R. and Kyzeczkowski, G., 1979, Computing Methods in Applied Mechanics and Engineering, Vol. 20.
Hayhurst, D. R., Leckie, F. A. and Morrison, C. J., 1978, Proc. Royal Soc. Lond., A 360.
Hayhurst, D. R., Morrison, C. S. and Brown, P. R., 1980, Proc. IUTAM Symposium Creep of Structures, Leicester.
Hayhurst, D. R., Trampczynski, W. A., and Leckie, F. A., 1980, to appear Acta Metallurgica.
Henderson, J. and Sneddon, J. D., 1972, National Engineering Laboratory, East Kilbriu, Scotland, Report No. 509.
Hui, C. Y., and Riedel, H. L., 1979, Brown University Report, MRLE117.
Janson, J. and Hult, J., 1977, J. de Mecanique Applique, Vol. 1.
Johnsson, A., 1974, Proc. Int.Conf. on Creep and Fatigue in Elevated Temperature, Sheffield, I Mech. Conf. Publication.
Krieg, R. D., Swearengen, J. C., and Rohde, R. W., 1976, Special Issue ASME Pressure Vessal Piping Section, PVP-PB 028.
Landes, J. D. and Begley, J., 1976, Mechanics of Crack Growth, ASTM STP 590.
Larsson, B. and Storakers, B., 1978, J. of Eng. Materials and Technology, Vol. 100.
Leckie, F. A., 1974, WRC Bulletin 195.
Leckie, F. A. and Hayhurst, D. R., 1974, Proc. Royal Soc. Land., Vol. A340.
Leckie, F. A., Hayhurst, D. R., and Morrison, C. J., 1976, Proc. Royal Soc. Land., A349.
Leckie, F. A. and Hayhurst, D. R., Acta Metallurgica, 1977.
LeGkie, F. A. and Onat, E. T., 1980, UITAM Symposium, Physical Non- Linearities in Structural Analysis, Senlis.
Leckie, F. A. and Panter, A. R. S., 1970, J. Appl. Mech., ASME, Vol. 37, No.2.
Leckie, F. A., and Panter, A. R. S., 1972, Arch. of Mech., Vol. 24.
Leckie, F. A. and Ranaweera, M. P., 1980, Oak Ridge National Laboratory Report, ORNL/Sub. 7689.
Leckie, F. A., and Wojewodski, W., 1977, J. Mech. Phys. of Solids” Vol. 12.
Mackenzie, A. C., 1968, Int. J. of Meche Sci., Vol. 10.
Manson, S. S., 1975, Time-Dependent Fatigue of Structural Alloys, Oak Ridge National Laboratory.
McMeeking, R. M. and Leckie, F. A., 1980, Dept. Report Theoretical and Applied Mechanics, University of Illinois, Urbana.
Mitra, S. K. and McLean, D., 1966, Proc. Royal Soc. Lond., A295.
Neate, G. J. and Siverns, M. J., 1973, Int. Conf. on Creep and Fatigue in Elevated Temperature Applications”, I. Mech. Eng. Philadelphia.
Onat, E. T., 1976, Oak Ridge National Lab Report, SUB-3863–7.
Panter, A. R. S., 1975, J. Appl. Mech., Vol. 42, Series E.
Panter, A. R. S., 1977, Int. J. Mech. Sci., Vol. 19.
Panter, A. R. S., and Brown, P. R., 1978, Int. J. for Numerical Methods in Engineering, Vol. 12.
Panter, A. R. S., and Leckie, F. A., 1976, Trans. ASME, J. of Engr. Materials and Tech., Vol. 98.
Panter, A. R. S., and Megahed, M. M., 1979, Dept. of Engr. Report, University of Leicester, 79–9.
Panter, A. R. S. and Walter, M. H., 1976, J. Appl. Mechs., 43.
Parker, J. D. and Wilshire, G., 1978, Metal Science.
Rabonov, Y. N., 1968, “Creep Problems in Structural Mechanics,” North-Holland, Amsterdam.
Townley, C. H. S., 1979, Chap. 10, Creep of Engineering, Materials and Structures, (Editors, G. Bernasconi and G. Piatti), Applied Science Publishers, London.
Trampczynski, W. A., Hayhurst, D. R., and Leckie, F. A., 1980, Dept. of Engr., Univ. of Leicester, Dept. Report, 80–8.
Tuegel, E., 1980, M. S. Thesis, University of Illinois, Urbanhampaign.
Webster, G. A., 1975, Proc. Conf. Mechs. and Physics of Fracture, Inst. of Physics, London.
Zarka, J. and Casier, J., 1980, Mechanics Today, Vol. 6, Ed. 5, Nemat-Nasser, Pergamon (to be published).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1981 Springer-Verlag, Berlin, Heidelberg
About this paper
Cite this paper
Leckie, F.A. (1981). Advances in Creep Mechanics. In: Ponter, A.R.S., Hayhurst, D.R. (eds) Creep in Structures. International Union of Theoretical and Applied Mechanics. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-81598-0_2
Download citation
DOI: https://doi.org/10.1007/978-3-642-81598-0_2
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-81600-0
Online ISBN: 978-3-642-81598-0
eBook Packages: Springer Book Archive