Abstract
The flow around surface-mounted obstacles placed in a turbulent channel flow (Re = 105 ) has been experimentally studied with the aim of determining separation and reattachment patterns and to investigate the major flow differences between two- and three-dimensional geometries. Obstacles of square cross-section and half channel height were studied while varying the cross-channel width between that of a cube and a two-dimensional rib. Surface flow patterns were obtained to study the flow topology. A two-component laser Doppler anemometer (LDA) was used to gain detailed information about the time-averaged and time-resolved turbulence parameters.
The results of this study lead to a picture of the flow pattern over a surface-mounted cube with quantitative data describing the mean and fluctuating velocity field. Major differences between the two- and three-dimensional flow patterns are identified, both upstream and downstream of the obstacle. Analysis of the time-dependent behaviour reveals a distinct unsteadiness of the upstream flow field for three-dimensional obstacles, which also leads to large contributions to the Reynolds shear stress.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Castro, LP. (1979): “Relaxing Wakes Behind Surface-Mounted Obstacles in Rough Wall Boundary Layers”, J. Fluid Mech. 93 pp. 631–659.
Castro, I.P., Robins, A.G. (1977): “The Flow Around a Surface-Mounted Cube in Uniform and Turbulent Streams”, Ann. Rev. Fluid Mech. 11 pp. 443–503
Brederode, V., Bradshaw, P. (1972): “Three-Dimensional Flow in Nominally Two-Dimensional Separation Bubbles I: Flow Behind a Rearward-Facing Step”, IC Aero Report 72–19, Imperial College, London
Devenport, W.J. and Simpson, R.L. (1990): “Time-Dependent and ‘lime-Averaged Turbulence Structure Near the Nose of a Wing-Body Junction”, J. Fluid Mech. 210 pp. 23–55
Dimaczek, G., Kessler, R., Martinuzzi, R. and Tropea, C. (1989): “The Flow Over Two-Dimensional, Surface-Mounted Obstacles at High Reynolds Numbers”, 7th Symp. on Turb. Shear Flows, Stanford CA
Dimaczek, G., EH, C., Tropea, C. (1988): “Sichtbarmachung von Wasserströmungen mit Hilfe des Kristalviolettverfahrens”, DLGR Workshop 2D-Meßtechnik, Marktdorf, DLGR-Bericht 88–04
Fackrell, J.E., Pearce, J.E. (1981): “Parameters Affecting Dispersion in the Near Wake of Buildings”,CEGB Report No. RD/M/1179/N81
Fairlie, B.D. (1980): “Flow Separation on Bodies of Revolution at Incidence”, Proc. 7th Australian Conf. on Hydr. and Fluid Mech., Brisbane.
Hunt, J.C.R., Abell, C.J., Peterka, J.A., Woo, H. (1978): “Kinematical Studies of the Flows Around Free or Surface- Mounted Obstacles; Applying Topology to Flow Visualization”, J. Fluid Mech. 86 pp. 179–200
König, J. (1990): “Anwendung des Kristallviolettverfahrens zur Untersuchung der dreidimensionalen Hindernisströmung”, Studienarbeit at the Lehrstuhl für Strömungsmechanik, University Erlangen—Nürnberg.
Perry A.E., Horning, H. (1984): “Some aspects of Three-Dimensional Separation”, Z. Flugwiss. Weltraumforschung 8 Heft 3, pp. 155–160.
Schofield, W.H. and Logan, E. (1990): “Turbulent Shear Flow Over Surface Mounted Obstacles”, J. of Fluid Engineering, Trans. of the ASME 112 pp. 376–385.
Theisinger,J (1990): “Untersuchung der Dreidimensionalität einer Rippenströmung im Flachkanal mittels LDA”, Diplomarbeit at the Lehrstuhl für Strömungsmechanik, University Erlangen-Nürnberg.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1993 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Larousse, A., Martinuzzi, R., Tropea, C. (1993). Flow Around Surface-Mounted, Three-Dimensional Obstacles. In: Durst, F., Friedrich, R., Launder, B.E., Schmidt, F.W., Schumann, U., Whitelaw, J.H. (eds) Turbulent Shear Flows 8. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-77674-8_10
Download citation
DOI: https://doi.org/10.1007/978-3-642-77674-8_10
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-77676-2
Online ISBN: 978-3-642-77674-8
eBook Packages: Springer Book Archive