Abstract
This chapter describes the design of an actively controlled implantable drug delivery device. Its job is to deliver small amounts of drug on a daily basis such that a patient no longer needs to get daily or weekly injections. Besides a reduction of the number of injections, implanted drug delivery systems offer many other advantages to a patient. Implantable drug delivery devices give a more constant drug level in the blood compared to injections. By the use of an active device instead of a passive, the drug level in the blood could be adapted to variations in physical activity, changes in temperature, etc. In chemotherapy and similar treatments, the device can be implanted at the place where the drug is needed such that the overall concentration of the drug in the body is much lower. The proposed device could be useful for hormonal treatments and all other treatments where small amounts of drugs are needed. In a first paragraph, solid drug delivery systems will be discussed. Main part of the chapter will concentrate on the design of a liquid drug delivery system. The proposed design is particular because the shape memory actuated microvalve has only silicone parts in direct contact with the drug. It is also very easy to produce in large volumes and can incorporate sensing functions.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Reynaerts D, VanBrussel H (1994) Shape memory alloy based electrical actuation for robotic applications. In: Pelton AR, Hodgson D, Duerig TW (eds) Proceedings of SMST 1994. Shape Memory and Superelastic Technologies, Pacific Grove, pp 271–276
Kao M, Schitz D, Thoma P, Klaus P, Angst D (1996) Shape memory alloy ribbon actuator. In: Proceedings of the Fifth International Conference on New Actuators, 26-28 June 1996. Axon Technologie Consult, Bremen, pp 370–374
Johnson AD, Busch JD, Ray CA, Sloan C (1992) Fabrication of silicon-based shape memory alloy micro-actuators. In: Jardine AP, Johnson GC (eds) Smart materials fabrication and materials for micro-electro-mechanical systems. Materials Research Society, Pittsburgh, pp 151–169
Kuribayashi K, Taniguchi T, Yositake M, Ogawa S (1992) Micron sized arm using reversible TiNi alloy thin film actuators. In: Jardine AP, Johnson GC (eds) Smart materials fabrication and materials for micro-electro-mechanical systems. Materials Research Society, Pittsburgh, pp 167–175
Walker JA, Gabriel KJ (1990) Thin-film processing of TiNi shape memory alloy. Sensors Actuators A 21:243–246
Johnson AD, Busch JD (1994) Recent progress in the application of thin film shape memory alloys. In: Pelton AR, Hodgson D, Duerig TW (eds) Proceedings of SMST 1994. Shape Memory and Superelastic Technologies, Pacific Grove, pp 299–304
Kohl M, Skrobanek KD, Quandt E, Schlossmacher P, Schuessler A, Allen DM (1995) Development of microactuators based on the shape memory effect. In: Proceedings of the International Conference on Martensitic Transformations, 20-25 Aug 1995. Les éditions de physique, Ulis, pp 1187–1192
Kohl M, Just E, Strojek A, Skrobanek KD, Pfleging W, Miyazaki S (1998) Shape memory microvalves for high pressure applications. In: Proceedings of the Sixth International Conference on New Actuators, 17-19 June 1998. Axon Technologie Consult, Bremen, pp 473–477
Bellouard Y, Clavel R, Gotthardt R, Bidaus JE, Sidler T (1998) A new concept of monolithic shape memory alloy micro-devices used in micro-robotics. In: Proceedings of the Sixth International Conference on New Actuators, 17-19 June 1998. Axon Technologie Consult, Bremen, pp 499–502
Miyazaki S, Ishida A, Takei A (1992) Development and characterization of Ti-Ni shape memory thin films. In: Proceedings of the Second International Symposium on Measurement and Control, Nov 1992. Society of Instrument Contract Engineers of Japan, Tokyo, pp 495–500
Ikuta K, Fujita H, Ikeda M, Yamashita S (1990) Crystallographic analysis of TiNi shape memory alloy thin film for micro actuator. In: Proceedings of the IEEE Micro Electro Mechanical Systems, 11-14 February 1990. Institute of Electrical and Electronics Engineers, Piscataway, pp 38–39
Kohl M, Quandt E, Schuessler A, Trapp R, Allen DM (1994) Characterization of NiTi shape memory microdevices produced by microstructuring of etched sheets or sputter deposited films. In: Proceedings of the Fourth International Conference on New Actuators, 15-17 Jun 1994. Axon Technologie Consult, Bremen, pp 317–320
Ikuta K, Hayashi M, Matsuura T (1990) Shape memory alloy thin film by laser ablation. In: Proceedings of IEEE Micro Electro Mechanical Systems, 25-29 January 1994. Institute of Electrical and Electronics Engineers, Piscataway, pp 355–360
Donner P, Eucken S (1990) The shape memory effect in meltspun ribbons. Mater Sci Forum, 56:723–728
Reynaerts D, Peirs J, VanBrussel H (1995) Production of shape memory alloys for microactuation. J Micromech Microeng 5:1–3
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2000 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Reynaerts, D., Peirs, J., Van Brussel, H. (2000). An Implantable Drug Delivery System Based on Shape-Memory Alloys. In: Yahia, L. (eds) Shape Memory Implants. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-59768-8_23
Download citation
DOI: https://doi.org/10.1007/978-3-642-59768-8_23
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-64118-3
Online ISBN: 978-3-642-59768-8
eBook Packages: Springer Book Archive