Abstract
Building, powering, and operating structures that can navigate complex fluidic environments at the sub-mm scale are challenging. We discuss some of the limitations encountered when translating actuation mechanisms and design-concepts from the macro- to the micro-scale. The helical screw-propeller or drill is a particularly useful geometry at small scales and Reynolds numbers, and is one of the mechanisms employed by microorganisms to swim. The shape necessarily requires three-dimensional fabrication capabilities which become progressively more challenging for smaller sizes. Here, we report our work in building and operating these screw-propellers at different sizes. We cover the length scales from the sub 100 nm to drills that are a few hundred microns in length. We use a known physical deposition method to grow micron-sized magnetic propellers that we can transfer to solutions. We have recently succeeded in extending the fabrication scheme to grow nanohelices, and here we briefly review the technical advances that are needed to grow complex shaped nanoparticles. The microstructures can be actuated by a magnetic field and possible applications of the micro- and nanohelices are briefly discussed. We also present a system of polymeric micro-screws that can be produced by micro-injection molding and that can be wirelessly driven by an external rotating magnetic field through biological phantoms, such as agarose gels with speeds of ~200 μm/s. The molding technique faithfully reproduces features down to a few microns. These microdrills can serve as a model system to study minimally invasive surgical procedures, and they serve as an efficient propeller for wireless microrobots in complex fluids. The fabrication scheme may readily be extended to include medically approved polymers and polymeric drug carriers.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Purcell, E.M.: Life at Low Reynolds-Number. Am. J. Phys. 45, 3–11 (1977)
http://www.micromo.com/datasheets/BrushlessDCmotors/0206_B_DFF.pdf
Watson, B., Friend, J., Yeo, L.: Piezoelectric ultrasonic resonant motor with stator diameter less than 250 μm: the Proteus motor. J. Micromech. Microeng. 19, 022001 (2009)
Cook-Chennault, K.A., Thambi, N., Sastry, A.M.: Powering MEMS portable devices - a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems. Smart Mater. 17, 043001 (2008)
Ghosh, A., Fischer, P.: Controlled Propulsion of Artificial Magnetic Nanostructured Propellers. Nano Letters 9, 2243–2245 (2009)
Zhang, L., Abbott, J.J., Dong, L.X., Kratochvil, B.E., Bell, D., Nelson, B.J.: Artificial bacterial flagella: Fabrication and magnetic control. Applied Physics Letters 94, 064107 (2009)
Mark, A.G., Gibbs, J.G., Lee, T.-C., Fischer, P.: Hybrid nanocolloids with programmed 3D-shape and material composition. Nature Materials 12, 802–807 (2013)
Tottori, S., Zhang, L., Qiu, F.M., Krawczyk, K.K., Franco-Obregon, A., Nelson, B.J.: Magnetic Helical Micromachines: Fabrication, Controlled Swimming, and Cargo Transport. Adv. Mater. 24, 811–816 (2012)
Keaveny, E.E., Walker, S.W., Shelley, M.J.: Optimization of Chiral Structures for Microscale Propulsion. Nano Letters 13, 531–537 (2013)
Hawkeye, M.M., Brett, M.J.: Glancing angle deposition: Fabrication, properties, and applications of micro- and nanostructured thin films. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 25, 1317–1335 (2007)
Robbie, K., Brett, M.J.: Sculptured thin films and glancing angle deposition: Growth mechanics and applications 15, 1460–1465 (1997)
Zhao, Y.P., Ye, D.X., Wang, G.C., Lu, T.M.: Novel Nano-Column and Nano-Flower Arrays by Glancing Angle Deposition. Nano Letters 2, 351–354 (2002)
Dick, B., Brett, M.J., Smy, T.: Controlled growth of periodic pillars by glancing angle deposition. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures 21, 23–28 (2003)
Roberts, G.: Langmuir - Blodgett films. Plenum, New York (1990)
Reculusa, S., Ravaine, S.: Synthesis of colloidal crystals of controllable thickness through the Langmuir-Blodgett technique. Chem. Mater. 15, 598–605 (2003)
Schamel, D., Pfeifer, M., Gibbs, J.G., Miksch, B., Mark, A., Fischer, P.: Chiral Colloidal Molecules and Observation of The Propeller Effect. Journal of the American Chemical Society 135, 12353–12359 (2013)
Glass, R., Moller, M., Spatz, J.P.: Block copolymer micelle nanolithography. Nanotechnology 14, 1153–1160 (2003)
Baranova, N.B., Zeldovich, B.Y.: Separation of Mirror Isomeric Molecules by Radio-Frequency Electric-Field of Rotating Polarization. Chem. Phys. Lett. 57, 435–437 (1978)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Qiu, T., Gibbs, J.G., Schamel, D., Mark, A.G., Choudhury, U., Fischer, P. (2014). From Nanohelices to Magnetically Actuated Microdrills: A Universal Platform for Some of the Smallest Untethered Microrobotic Systems for Low Reynolds Number and Biological Environments. In: Paprotny, I., Bergbreiter, S. (eds) Small-Scale Robotics. From Nano-to-Millimeter-Sized Robotic Systems and Applications. ICRA 2013. Lecture Notes in Computer Science(), vol 8336. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-55134-5_5
Download citation
DOI: https://doi.org/10.1007/978-3-642-55134-5_5
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-55133-8
Online ISBN: 978-3-642-55134-5
eBook Packages: Computer ScienceComputer Science (R0)