Abstract
Introduces some principles and calculating method used for the problem of porous brick wall in new energy-saving area. Finite volume method is adopted to complete the numerical analysis of building blocks model. The SIMPLE algorithm is used to solve the equation of speed and pressure. Convection–diffusion subject uses second-order upwind format. Calculation mesh adopts the unstructured hexahedral style. A few examples calculated are given. The date comparisons between calculation and experiment are given up. Rectangular hole brick is affected more stronger than circle hole brick. The wall heat flux and wall temperature have been calculated. Thermal performance can be obtained through numerical calculation in the steady heat transfer, being very approximate from the experimental result. According to the calculation of temperature distribution in the brick, thermal performance can be successfully analyzed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Henan research institutes of building science, Henan design standard for energy efficiency of Residential buildings in cold zones (2005) China Radio and Television publishing house (DBJ41/062-2005), Bejing
Bureaux of Wall Materials Innovation and Energy Saving in Buildings in Shandong (2006) Shandong design standard for energy efficiency of Residential buildings(DBJ 14-037-2006), Jinan
Department of Construction Engineering Quality and Safety Supervision Ministry of Housing and Urban-Rural Development of the P. R. china and China institute of building standard design and research (2009) National Technical Measures for Design of Civil Construction—Heating, Ventilation and Air Conditioning; China Planning press, Beijing
Lu Y (2008) Practical manual for design of heating and air conditioning. China architecture and building press
China institute of building standard design and research (2003) Design atlas for national building standard 04J101, Brick building construction. China Planning press, Bejing
Tao W (2002) Numerical heat transfer, 2nd edn. Xi’an Jiaotong University Press, Xi’an
Ji GQ (2003) Study of influencing factor of thermal conductivity in Hollow brick. Block-Brick-Tile 2:5–8
Building engineering quality testing center station of Henan (2008) Test report, 09 class of 2008 No. 559
Xu S, Li F, Lv H, Xia D, Wang S (2006) Design on module fired coal shale perforated brick and test on thermal performance of brick wall. Brick-tile 5:13–16
Yan Q (1995) Architectural thermal process. China architecture and building press, Beijing
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Wang, X., Ma, F., Zheng, H. (2014). Numerical Calculation and Analysis of Apply for the Heat Transfer Performance of Porous Brick. In: Li, A., Zhu, Y., Li, Y. (eds) Proceedings of the 8th International Symposium on Heating, Ventilation and Air Conditioning. Lecture Notes in Electrical Engineering, vol 262. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-39581-9_70
Download citation
DOI: https://doi.org/10.1007/978-3-642-39581-9_70
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-39580-2
Online ISBN: 978-3-642-39581-9
eBook Packages: EngineeringEngineering (R0)