Summary
Shunt active power filters have been introduced as a way to overcome the power quality problems caused by nonlinear and reactive loads [9, 14, 23]. These power electronics devices are designed with the goal of obtaining a power factor close to 1 and achieving current harmonics and reactive power compensation [5, 6, 15]. The usual approaches [5, 15] for the control of shunt active filters are based on two hierarchical control loops: an inner one that assures the desired current and an outer one in charge of determining its required shape and the appropriate power balance as well. The control structure followed in this Chapter is the one in [7], in which the current controller is composed of a feedforward action that provides very fast transient response, and also of a feedback loop which includes an odd-harmonic repetitive control that yields closed-loop stability and a very good harmonic correction performance. In turn, the outer control law is based on the appropriated computation of the amplitude of the sinusoidal current network and, aiming at a robustness improvement, this is combined with a feedback control law including an analytically tuned PI controller.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Ali, M., Tamura, J., Wu, B.: SMES strategy to minimize frequency fluctuations of wind generator system. In: 34th Annual Conference of IEEE Industrial Electronics, IECON 2008, pp. 3382–3387 (November 2008)
Apkarian, P., Adams, R.: Advanced gain-scheduling techniques for uncertain systems. IEEE Transactions on Control Systems Technology 6(1), 21–32 (1998)
Bolik, S.: Modelling and Analysis of Variable Speed Wind Turbines with Induction Generator during Grid Fault. Ph.D. Thesis, Aalborg University (2004)
Bruijnen, D., van de Molengraft, M., Steinbuch, M.: Efficient IIR notch filter design via multirate filtering targeted at harmonic disturbance rejection. In: Proceedings of the 4th IFAC Symposium on Mechatronic Systems, Heidelberg, Germany, pp. 318–323 (2006)
Buso, S., Malesani, L., Mattavelli, P.: Comparison of current control techniques for active filters applications. IEEE Transactions on Industrial Electronics 45, 722–729 (1998)
Corasaniti, V., Barbieri, M., Arnera, P., Valla, M.: Hybrid active filter for reactive and harmonics compensation in a distribution network. IEEE Transactions on Industrial Electronics 56(3), 670–677 (2009)
Costa-Castelló, R., Griñó, R., Cardoner Parpal, R., Fossas, E.: High-performance control of a single-phase shunt active filter. IEEE Transactions on Control Systems Technology 17(6), 1318–1329 (2009)
Datta, M., Senjyu, T., Yona, A., Funabashi, T., Kim, C.-H.: A frequency-control approach by photovoltaic generator in a pv-diesel hybrid power system. IEEE Transactions on Energy Conversion 26(2), 559–571 (2011)
Freijedo, F., Doval-Gandoy, J., Lopez, O., Fernandez-Comesana, P., Martinez-Penalver, C.: A signal-processing adaptive algorithm for selective current harmonic cancellation in active power filters. IEEE Transactions on Industrial Electronics 56(8), 2829–2840 (2009)
Fujioka, H.: Stability analysis for a class of networked-embedded control systems: A discrete-time approach. In: Proceedings of the American Control Conference, pp. 4997–5002 (2008)
Galeani, S., Tarbouriech, S., Turner, M., Zaccarian, L.: A tutorial on modern anti-windup design. European Journal of Control 15, 418–440 (2009)
Hippe, P.: Windup in Control: Its Effects and Their Prevention, 1st edn. Advances in Industrial Control. Springer (May 2006)
IEC. Electromagnetic compatibility part 2-4: Environment compatibility levels in industrial plants for low-frequency conducted disturbances. IEC 6100-2-4:2002 (2002)
Lascu, C., Asiminoaei, L., Boldea, I., Blaabjerg, F.: Frequency response analysis of current controllers for selective harmonic compensation in active power filters. IEEE Transactions on Industrial Electronics 56(2), 337–347 (2009)
Mattavelli, P.: A closed-loop selective harmonic compensation for active filters. IEEE Transactions on Industry Applications 37(1), 81–89 (2001)
Ryu, Y.S., Longman, R.: Use of anti-reset windup in integral control based learning and repetitive control. In: Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics. Humans, Information and Technology, vol. 3, pp. 2617–2622 (October 1994)
Sala, A.: Computer control under time-varying sampling period: An LMI gridding approach. Automatica 41(12), 2077–2082 (2005)
Sbarbaro, D., Tomizuka, M., de la Barra, B.L.: Repetitive control system under actuator saturation and windup prevention. Journal of Dynamic Systems, Measurement, and Control 131(4), 044505 (2009)
Songschon, S., Longman, R.W.: Comparison of the stability boundary and the frequency response stability condition in learning and repetitive control. International Journal of Applied Mathematics and Computer Science 13(2), 169–177 (2003)
Suh, Y.S.: Stability and stabilization of nonuniform sampling systems. Automatica 44(12), 3222–3226 (2008)
Teodorescu, R., Liserre, M., Rodríguez, P.: Grid converters for photovoltaic and wind power systems. Adaptive and Learning Systems for Signal Processing, Communications and Control Series. John Wiley & Sons, Ltd. (August 2011)
U C T E. Technical paper: Definition of a set of requirements to generating units (2008)
Varschavsky, A., Dixon, J., Rotella, M., Moran, L.: Cascaded nine-level inverter for hybrid-series active power filter, using industrial controller. IEEE Transactions on Industrial Electronics 57(8), 2761–2767 (2010)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Ramos, G.A., Costa-Castelló, R., Olm, J.M. (2013). Shunt Active Power Filter. In: Digital Repetitive Control under Varying Frequency Conditions. Lecture Notes in Control and Information Sciences, vol 446. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-37778-5_7
Download citation
DOI: https://doi.org/10.1007/978-3-642-37778-5_7
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-37777-8
Online ISBN: 978-3-642-37778-5
eBook Packages: EngineeringEngineering (R0)