Abstract
Asymmetric gears have been proposed more than twenty years ago as the ultimate solution to increase the load capacity of gear drives while reducing their weight and dimensions. However, there are apparently contradictive statements in the literature regarding whether the higher pressure angle should be applied to the driving or coast side of the gear tooth surfaces. In this work, modern technologies of design and analysis of enhanced gear drives will be applied in order to validate the advantages of application of asymmetric gears and to determine what the right configuration of the asymmetric gear drive should be in terms of application of the higher pressure angle to the driving or coast side of the gear teeth. The evolution of contact and bending stresses as well as contact pressure for the whole cycle of meshing is investigated and compared for symmetric and asymmetric gears. Two configurations of asymmetric gears will be considered, taking into account both, the higher and the lower pressure angle for the driving side. In this way, the advantages of application of asymmetric cylindrical gears as well as the right configuration to get them are established.
Keywords
F2012-C02-010
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Kapelevich AL (2000) Geometry and design of involute spur gears with asymmetric teeth. Mech Mach Theor 35(117-130): 2000
Litvin FL, Lian Q, Kapelevich AL (2000) Asymmetric modified spur gear drives: reduction of noise, localization of contact, simulation of meshing and stress analysis. Comput Methods Appl Mech Eng 188(1–3):363–390
Hayer L (1986) Advanced transmission components investigation. Sikorski Aircraft Division, USAAVRADCOM TR-82-D-11
Sanders A, Houser DR, Kahraman A, Harianto J, Shon S (2011) An experimental investigation of the effect of tooth asymmetry and tooth root shape on root stresses and single tooth bending fatigue life of gear teeth. In: Proceedings of the ASME 2011 international design engineering technical conferences, IDETC/CIE 2011, Washington DC, USA
Litvin F, Fuentes A (2004) Gear geometry and applied theory. Cambridge University Press, New York
DiFrancesco G, Marini S (1997) Structural analysis of asymmetrical teeth: reduction of size and weight. Gear Technol 14(5):47–51
Karpat F, Cavdar K, Babalik FC (2005) Computer aided analysis of involute spur gear with asymmetric teeth. VDI Berichte 1904(I):145–163
Kapelevich AL (2009) Direct design of asymmetric gears: approach and application. In: International conference on motion and power transmissions
Kapelevich AL (2010) Measurement of directly designed gears with symmetric and asymmetric teeth. In: International conference on gears
Kapelevich AL (2011) Asymmetric gears: parameter selection approach. In: International conference on power transmissions of Xian
Kapelevich AL, Shekhtman YV (2009) Tooth fillet profile optimization for gears with symmetric and asymmetric teeth. Gear Technology, pp 73–79
Yang SC (2005) Mathematical model of a helical gear with asymmetric involute teeth and its analysis. International Journal of Advanced Manufacturing Technology 26(5):448–456
Acknowledgments
The authors express their deep gratitude to the Spanish Ministry of Economy and Competitiveness—MINECO (formerly Ministry of Science and Innovation) for the financial support of research projects ref. DPI2010-20388-C02-01 (financed jointly by FEDER) and DPI2010-20388-C02-02.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Fuentes, A., Gonzalez-Perez, I., Sanchez-Marin, F.T., Hayasaka, K. (2013). On the Behaviour of Asymmetric Cylindrical Gears in Gear Transmissions. In: Proceedings of the FISITA 2012 World Automotive Congress. Lecture Notes in Electrical Engineering, vol 193. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-33744-4_13
Download citation
DOI: https://doi.org/10.1007/978-3-642-33744-4_13
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-33743-7
Online ISBN: 978-3-642-33744-4
eBook Packages: EngineeringEngineering (R0)