Abstract
Especially for small batch series or customer specific development orders, development costs are a noteworthy part of the overall costs and cannot be balanced by optimized production processes and lower production costs as in the case of mass production. Even though they might not be state of the art in industrial application, there are numerous methods for the estimation of costs that are determined in the course of product development. However, the costs caused by the actual development processes are hardly considered. This gap is supposed to be filled by an estimation of development costs as a direct consequence of development (and with it information handling) effort. For this an information model of the design process and the information handling steps which aregenerating the design effort are presented.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Schnauffer, P.: Multidisziplinärer Datenfluss im Entwicklungsprozess der Flugzeugbaus am Beispiel eines Senkrechtstarters. Dissertation, Universität Stuttgart
Ehrlenspiel, K., Kiewert, A., Lindemann, U.: Kostengünstig Entwickeln und Konstruieren: Kostenmanagement bei der integrierten Produktentwicklung. VDI-Buch. Springer, Heidelberg (2005)
Bashir, H.A., Thomson, V.: Models for estimating design effort and time. Design Studies 22(2), 141–155 (2001)
VDI: Methodik zum Entwicklung und Konstruieren technischer Systeme und Produkte (2221) (1993)
Bender, B.: Erfolgreiche individuelle Vorgehensstrategien in frühen Phasen der Produktentwicklung. VDI-Verl., Düsseldorf (2004)
Heymann, M.: "Kunst" und Wissenschaft in der Technik des 20. Jahrhunderts: Zur Geschichte der Konstruktionswissenschaft. Chronos, Zürich (2005)
Reich, Y.: My method is better! Res. Eng. Design 21(3), 137–142 (2010)
Ehrlenspiel, K.: Integrierte Produktentwicklung: Denkabläufe, Methodeneinsatz, Zusammenarbeit, 4th edn. Hanser, München [u.a.] (2009)
Pahl, G., Beitz, W., Feldhusen, J., Grote, K.-H.: Pahl/Beitz Konstruktionslehre: Grundlagen erfolgreicher Produktentwicklung, 7th edn. Methoden und Anwendung. Springer, Berlin (2007)
Breiing, A., Flemming, M.: Theorie und Methoden des Konstruierens: Mit 3 Tabellen. Springer, Berlin (1993)
Hichert, R.: Praktische Ansätze zur Termin-, Kapazitäts- und Kostenplanung in Entwicklung und Konstruktion. In: Moll, H.H. (ed.) RKW-Handbuch Forschung, Entwicklung, Konstruktion (F+E); ergänzbares Handbuch für Wissenschaft, Technik, Wirtschaft und Verwaltung, vol. 3. Schmidt, Berlin (1976)
Paul, J.: Planung, Steuerung und strategische Ausrichtung der Produktentwicklung. In: Moll, H.H. (ed.) RKW-Handbuch Forschung, Entwicklung, Konstruktion. (F+E); ergänzbares Handbuch für Wissenschaft, Technik, Wirtschaft und Verwaltung. Schmidt, Berlin (1976)
Amft, M.: Phasenübergreifende bidirektionale Integration von Gestaltung und Berechnung. Dissertation, Technische Universität München (2002)
Lauer, W.: Integrative Dokumenten- und Prozessbeschreibung in dynamischen Produktentwicklungsprozessen. Disseration, Technische Universität München (2010)
Zahay, D., Griffin, A., Fredericks, E.: Sources, uses, and forms of data in the new product development process. Industrial Marketing Management 33(7), 657–666 (2004)
Müller, J.: Arbeitsmethoden der Technikwissenschaften: Systematik, Heuristik, Kreativität. Springer, Berlin (1990)
DIN: Dokumentenmanagement Teil 1: Prinzipien und Methoden (82045-1:2002-11)
DIN: Technische Produktdokumentation Lebenszyklusmodell und Zuordnung von Dokumenten (15226) (1999)
Ulrich, K.T., Eppinger, S.D.: Product design and development, 3rd edn. McGraw-Hill/Irwin, Boston (2004)
Frankenberger, E., Badke-Schaub, P., Birkhofer, H. (eds.): Designers: The key to successful product development, Darmstadt. Springer, London (Dezember 1997, 1998)
Stöckert, H.: Fehlervermeidung an Schnittstellen-Prozessen der verteilten Produktentwicklung. Dissertation, Technische Universität Berlin (2011)
Kessler, E.H.: Tightening the belt: methods for reducing development costs associated with new product innovation. J. Eng. Technol. Management 17, 59–92 (2000)
Griffin, A.: Metrics for Measuring Product Development Cycle Time. Journal of Production Innovation Management 10(2), 112–125 (1993)
Cooper, R.G., Kleinschmidt, E.J.: Determinants of timeliness in Product Development. Journal of Production Innovation Management 11, 381–396 (1994)
Frankenberger, E., Badke-Schaub, P.: Integration of Groups, Individual and External Influences in the Design Process. In: Frankenberger, E., Badke-Schaub, P., Birkhofer, H. (eds.) Designers. The key to Successful Product Development, Darmstadt, pp. 149–164, pp. 149–164. Springer, London (Dezember 1997, 1998)
Duffy, A.H.B., O’Donnell, F.J.: A Model of Product Development Performance. In: Frankenberger, E., Badke-Schaub, P., Birkhofer, H. (eds.) Designers. The Key to Successful Product Development, Darmstadt, pp. 269–283. Springer, London (Dezember 1997, 1998)
Uhlig, V.: Informationstechnische Unterstützung von Entwicklungskooperationen. PZH, Produktionstechn. Zentrum, Hannover (2002)
Badke-Schaub, P., Frankenberger, E.: Management kritischer Situationen: Produktentwicklung erfolgreich gestalten. Springer, Berlin (2004 [erschienen 2003])
Frankenberger, E.: Arbeitsteilige Produktentwicklung: Empirische Untersuchung und Empfehlungen zur Gruppenarbeit in der Konstruktion, vol. 291. VDI-Verl., Düsseldorf (1997)
Hacker, W., Sachse, P., Schroda, F.: Design Thinking – Possible Ways to successful Solutions in Product Development. In: Frankenberger, E., Badke-Schaub, P., Birkhofer, H. (eds.) Designers. The Key to Successful Product Development, Darmstadt, pp. 205–216. Springer, London (Dezember 1997, 1998)
Griffin, A.: The Effect of Project and Process Characteristics on Product Development Cycle Time. Journal of Marketing Research (34), 24–35 (1997)
Müller, A.: Iterative Zielklärung und Handlungsplanung als Faktoren erfolgreichen Gruppenhandelns bei der Lösung komplexer Probleme: Eine handlungstheoretische Betrachtung des Konstruierens in Gruppen. Dissertation, Technische Universität München (2007)
Christiaans, H.C., van Andel, J.: Information Processing and Storage during the Design Process: The Use of a Flexible Information System. In: Frankenberger, E., Badke-Schaub, P., Birkhofer, H. (eds.) Designers. The Key to Successful Product Development, Darmstadt, pp. 233–248. Springer, London (Dezember 1997, 1998)
Hondorf, T.: Evaluierung von Methoden zur Entwicklung sicherheitskritischer Softwaresysteme. Informatikprojekt, Hochschule Ravensburg-Weingarten (2010)
Heller, J.E., Pollmanns, J., Feldhusen, J.: Bestimmung des Produktentwicklungsaufwands basierend auf Kennzahlen am Beispiel der Luftfahrzeugentwicklung. In: Stelzer, R., Grote, K.-H., Brökel, K., Rieg, F., Feldhusen, J. (eds.) Entwerfen Entwickeln Erleben: Methoden und Werkzeuge in der Produktentwicklung (EEE 2012). 10. Gemeinsames Kolloquium Konstruktionstechnik, Residenzschloss Dresden, June 14-15, pp. 565–580. TUDpress, Dresden (2012)
Boehm, B.W.: Software engineering economics. Prentice-Hall advances in computing science and technology series. Prentice-Hall, Englewood Cliffs (1981)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Pollmanns, J., Hohnen, T., Feldhusen, J. (2013). An Information Model of the Design Process for the Estimation of Product Development Effort. In: Abramovici, M., Stark, R. (eds) Smart Product Engineering. Lecture Notes in Production Engineering. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-30817-8_87
Download citation
DOI: https://doi.org/10.1007/978-3-642-30817-8_87
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-30816-1
Online ISBN: 978-3-642-30817-8
eBook Packages: EngineeringEngineering (R0)