Advertisement

Operating Parameters of Wood Cutting Tools

  • Etele Csanády
  • Endre Magoss
Chapter

It is important to operate woodworking machines and tools economically and correctly. The optimal operating parameters and manufacturing costs change depending on the task. The operational parameters also have limits. Exceeding these limits may hamper the safe operation of the machine or the tool.

Keywords

Chip Thickness Feed Speed Grit Size Relative Deformation Beech Wood 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    Sitkei, G. et. al.: Theorie des Spanens von Holz. Fortschrittbericht No.1. Acta Fac. Ligniensis, Sopron (1990)Google Scholar
  2. 2.
    Sitkei, G., Horváth, M.: Log dynamics during sawing in frame saws. In: Proceedings of 12th IWMS Kyoto, pp. 327–334 (1995)Google Scholar
  3. 3.
    Westkämper, E., Freytag, J.: PKD-Schneidstoff zum Sägen melaminharzbeschichteter Spanplatten. IDR 1/1991, S. 46–49Google Scholar
  4. 4.
    Lang, M.: Untersuchungen zur Entwicklung eines kombinierten Plan- und Umfangsfräsverfahrens mit kegelstumpförmigen Werkzeugen. PhD Dissertation, Dresden−Sopron (1989)Google Scholar
  5. 5.
    Tröger, J., Lang, M.: Hobelfräsen mit vermindertem Wellenschlag. HOB, 11/1990, S. 43–49Google Scholar
  6. 6.
    Кряжев, Н. А.: Цилиндрическое и коническое фрезерование древесины. (Cylindric and cone-shaped milling tools for wood machining) Лесная Пром., Москва (1963)Google Scholar
  7. 7.
    Westkämper, E., Kisselbach, A.: Leistungsteigerung beim Bohren. HOB 1995, S. 94–103Google Scholar
  8. 8.
    Mothe, F., Marchal, R.: Influence of nosebar settings on tool instabilities in the peeling process. In: Proceedings of 15th IWMS Los Angeles, pp. 309–328 (2001)Google Scholar
  9. 9.
    Bakar, E., Marchal, R.: Efficiency of automatic adjustment of a slanted-elastic pressure nosebar in peeling. In: Proceedings of 16th IWMS Matsue, pp. 815–821 (2003)Google Scholar
  10. 10.
    Timoshenko, S., Goodier, J.: Theory of Elasticity. Mc. Graw-Hill, NewYork (1951)Google Scholar
  11. 11.
    Scholz, F., Ratmasingam, J.: Optimization of sanding process. Proceedings of 17th IWMS Rosenheim, pp. 422–429 (2005)Google Scholar
  12. 12.
    Dobrindt, P.: Optimiertes Schleifen von MDF—und Spanplatten. Workshop Tagungsband, 8.Holztechn. Koll. Braunschweig, S. 125–136 (1991)Google Scholar
  13. 13.
    Siklinka, M., Ockajova, A.: The study of selected parameters in wood sanding. Proceedings of 15th Int. Wood Machining Seminar Los Angeles, pp. 485–490 (2001)Google Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2013

Authors and Affiliations

  • Etele Csanády
    • 1
  • Endre Magoss
    • 1
  1. 1.Department of Wood EngineeringUniversity of West-Hungary SopronSopronHungary

Personalised recommendations