Abstract
High wear on ball screws as a key component of the electromechanical feed axis determines the availability of a machine tool. To minimize machining times, high dynamic motions of the feed axis can be achieved with high jerk values of the servomotors. Higher jerk values cause impact stresses in the ball screw which can lead to premature failure. An empirical model to describe the wear behavior of ball screws, taking into account the influence of jerk, is developed based on test bench analyses. The aim is to achieve a higher availability of machine tools and lower life- cycle production costs.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Ruf, M.: Der Kugelgewindetrieb als Vorschubelement. Technische Rundschau (39) (1984)
Milberg, J.: Verfügbarkeit von WZM. Verbesserungspotenziale sind noch nicht ausgeschöpft, VDI Journal 136(1/2), 31–32 (1994)
Tönshoff, H.K., Günther, G., Schmidt, J., Seufzer, A.: Vorbeugen oder heilen? - Ausfallursachen spanender Werkzeugmaschinen und deren Komponenten. Schweizer Maschinenmarkt (21), 80–82 (1998)
Koether, R., Rau, W.: Fertigungstechnik für Wirtschafts-Ingenieure, vol. 3. Hanser Verlag, München (2008)
Brecher, C., Queins, M.: Auslegung und Optimierung von Vorschubantrieben für Werkzeugmaschinen. In: Tagungsband zum Elektrisch-mechanische Antriebssysteme: Innovationen-Trends-Mechatronik, Fulda (2004)
Spieß, D.: Das Steifigkeits- und Reibungsverhalten unterschiedlich gestalteter Kugelschraubtriebe mit vor-gespannten und nicht vorgespannten Muttern-Systemen. Diss. Technical University Berlin (1970)
Haberkern, A.: Leistungsfähigere Kugelgewindetriebe durch Beschichtung. Diss. University Karlsruhe, TH (1998)
Yagmur, T., Brecher, C.: Influences of oil additives on the wear behaviour of ball screws. In: Production Engineering -Research and Development, vol. (3). Springer (2009)
Bertsche, B.: Zuverlässigkeit im Fahrzeug-und Maschinenbau. In: Ermittlung der Bauteil- und System-Zuverlässigkeiten, vol. 3. Springer, Berlin (2004)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Brecher, C., Yagmur, T. (2012). Development of an Empirical Model to Describe the Service Life of Ball Screws for Machine Tools under Consideration of Jerk Influences. In: Dornfeld, D., Linke, B. (eds) Leveraging Technology for a Sustainable World. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-29069-5_39
Download citation
DOI: https://doi.org/10.1007/978-3-642-29069-5_39
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-29068-8
Online ISBN: 978-3-642-29069-5
eBook Packages: EngineeringEngineering (R0)