Advertisement

HangBot: A Ceiling Mobile Robot with Robust Locomotion under a Large Payload

(Basic Design and Development of Key Mechanisms)
  • Rui Fukui
  • Hiroshi Morishita
  • Taketoshi Mori
  • Tomomasa Sato
Part of the Springer Tracts in Advanced Robotics book series (STAR, volume 79)

Abstract

In this paper, we proposed a ceiling mobile robot which can transfer a heavy load. First of all, we explained the basic design to overcome the constraints of the motion flexibility and maximum payload, and proposed a ceiling mobile robot that hangs under a ceiling perforated plate with continuous hole patterns. Next we designed and implemented two key mechanisms for the proposed robot; (1) a hanging mechanism for the robust ceiling lock/release motion and (2) a pantograph mechanism for averaging the locomotion speed of the separated inner and outer bodies. In the experiment, the capabilities of the developed two key mechanisms are evaluated and revealed that both mechanisms have enough performance to construct the proposed ceiling mobile robot. Moreover key points of the future works to utilize the developed mechanisms are also mentioned. That is, the optimization of the number and alignment of the hanging mechanisms.

Keywords

Outer Body Locomotion Speed Horizontal Locomotion Climbing Robot Large Payload 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Grieco, J.C., et al.: A six-legged climbing robot for high payloads. In: Proceedings of IEEE International Conference on Control Applications, pp. 446–450 (1998)Google Scholar
  2. 2.
    Inoue, K., et al.: Omni-directional gait of limb mechanism robot hanging from grid-like structure. In: Proc. of IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, pp. 1732–1737 (2006)Google Scholar
  3. 3.
    Lu, Z., et al.: Transition motion from ladder climbing to brachiation for multi-locomotion robot. In: Proc. of International Conference on Mechatronics and Automation, pp. 1916–1921 (2009)Google Scholar
  4. 4.
    Menon, M., Asasda, H.: Actuation and position estimation of a passive mobile end effector from across a thin wall for heavy-duty aircraft manufacturing. In: Proceedings of IEEE International Conference on Robotics and Automation, pp. 985–991 (2009)Google Scholar
  5. 5.
    Miyake, T., Ishihara, H., Tomino, T.: Vacuum-based wet adhesion system for wall climbing robots -lubricating action and seal action by the liquid-. In: Proceedings of IEEE International Conference on Robotics and Biomimetics, pp. 1824–1829 (2009)Google Scholar
  6. 6.
    Sato, T., et al.: Construction of ceiling adsorbed mobile robots platform utilizing permanent magnet inductive traction method. In: Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 552–558 (2004)Google Scholar
  7. 7.
    Scheinman, V.: Robotworld: A multiple robot vision guided assembly system. In: Proceedings of the 4th International Symposium on Robotics Research (1987)Google Scholar
  8. 8.
    Tummala, R.L., et al.: Climbing the walls (distributed robotics). IEEE Robotics & Automation Magazine 9(4), 10–19 (2002)CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Berlin Heidelberg 2014

Authors and Affiliations

  • Rui Fukui
    • 1
  • Hiroshi Morishita
    • 2
  • Taketoshi Mori
    • 1
  • Tomomasa Sato
    • 1
  1. 1.The University of TokyoBunkyo-kuJapan
  2. 2.HMI Corp.Koyama MatsudoJapan

Personalised recommendations