Advertisement

Abstract

Civil infrastructures are important long-term investments of a nation which are crucial in supporting the nation’s economic and social activities. Therefore, it is vital to continuously monitor the performance and condition of all civil infrastructures, especially the critical ones such as bridges and power plants so that any adverse changes in their performance or condition can be detected in a timely fashion and mitigated. In addition, instrumenting the structures at the time of construction, and their monitoring thereafter, could help in validating key design parameters as well as providing valuable insight into their behavior and performance under actual loadings. Ironically, whereas vast economic resources are mobilized for the construction of civil infrastructures, structural engineers in general are not too concerned with their post-construction behavior.

Keywords

Piezoelectric Material Damage Detection Structural Health Monitoring Smart Material Smart Structure 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Adams, R.D., Cawley, P., Pye, C.J. and Stone, B.J. (1978). “A Vibration Technique for Non-Destructively Assessing the Integrity of Structures”, Journal of Mechanical Engineering Science, 20: 93–100.CrossRefGoogle Scholar
  2. Ahmad, I. (1988). “Smart Structures and Materials”, Proceedings of U.S. Army Research Office Workshop on Smart Materials, Structures and Mathematical Issues, September 15–16, Virginia Polytechnic Institute & State University, Technomic Publishing Co., Inc., 13–16.Google Scholar
  3. Aktan, A.E., Catbas, F.N., Grimmelsman, K.A. and Tsikos, C.J. (2000). “Issues in Infrastructure Health Monitoring for Management”, Journal of Engineering Mechanics, 126(7): 711–724.CrossRefGoogle Scholar
  4. Banan, M.R., Banan, M.R. and Hjelmstad, K.D. (1994). “Parameter Estimation of Structures from Static Response. I. Computational Aspects”, Journal of Structural Engineering, 120(11): 3243–3258.CrossRefGoogle Scholar
  5. Boller, C. (2002). “Structural Health Management of Ageing Aircraft and Other Infrastructure”, Monograph on Structural Health Monitoring, Institute of Smart Structures and Systems (ISSS), 1–59.Google Scholar
  6. Catbas, F.N., Ciloglu, S.K., Hasancebi, O., Grimmelsman, K. and Aktan, A.K. (2007). “Limitations in Structural Identification of Large Constructed Structures”, Journal of Structural Engineering, 133: 1051–1066.CrossRefGoogle Scholar
  7. El-Borgi, S., Choura, S., Ventura, C., Baccouch, M. and Cherif, F. (2005). “Modal Identification and Model Updating of a Reinforced Concrete Bridge”, Smart Structures and Systems, 1: 83–101.Google Scholar
  8. Fairweather, J.A. (1998). “Designing with Active Materials: An Impedance Based Approach”, Ph.D. Thesis. Rensselaer Polytechnic Institute, New York.Google Scholar
  9. Farrar, C.R. and Jauregui, D.A. (1998). “Comparative Study of Damage Identification Algorithms Applied to a Bridge: I. Experiment”, Smart Materials and Structures, 7(5): 704–719.CrossRefGoogle Scholar
  10. Gandhi, M.V. and Thompson, B.S. (1992). Smart Materials and Structures. London: Chapman and Hall.Google Scholar
  11. Giurgiutiu, V., Redmond, J., Roach, D. and Rackow, K. (2000). “Active Sensors for Health Monitoring of Ageing Aerospace Structures”, Proceedings of the SPIE Conference on Smart Structures and Integrated Systems, SPIE 3985: 294–305.Google Scholar
  12. Giurgiutiu, V. and Zagrai, A.N. (2002). “Embedded Self-Sensing Piezoelectric Active Sensors for On-Line Structural Identification”, Journal of Vibration and Acoustics, ASME, 124: 116–125.CrossRefGoogle Scholar
  13. IEEE (1987). IEEE Standard on Piezolectricity, Std. 176. IEEE/ANSI.Google Scholar
  14. Ikeda, T. (1990). Fundamentals of Piezoelectricity. Oxford: Oxford University Press.Google Scholar
  15. Kamada, T., Fujita, T., Hatayama, T., Arikabe, T., Murai, N., Aizawa, S. and Tohyama, K. (1997). “Active Vibration Control of Frame Structures with Smart Structures Using Piezoelectric Actuators (Vibration Control by Control of Bending Moments of Columns)”, Smart Materials and Structures, 6: 448–456.CrossRefGoogle Scholar
  16. Kessler, S.S., Spearing, S.M., Attala, M.J., Cesnik, C.E.S. and Soutis, C. (2002). “Damage Detection in Composite Materials Using Frequency Response Methods”, Composites, Part B: Engineering, 33: 87–95.CrossRefGoogle Scholar
  17. Kumar, S. (1991). “Smart Materials for Accoustic or Vibration Control”, Ph.D. Dissertation. Pennsylvania State University, USA.Google Scholar
  18. Loh, C.H. and Tou, I.C. (1995). “A System Identification Approach to the Detection of Changes in Both Linear and Non-linear Structural Parameters”, Earthquake Engineering and Structural Dynamics, 24(1): 85–97.CrossRefGoogle Scholar
  19. Lynch, J.P., Partridge, A., Law, K.H., Kenny, T.W., Kiremidjian, A.S. and Carryer, E. (2003). “Design of Piezoresistive MEMS-Based Accelerometer for Integration with Wireless Sensing Unit for Structural Monitoring”, Journal of Aerospace Engineering, 16(3): 108–114.CrossRefGoogle Scholar
  20. Manning, W.J., Plummer, A.R. and Levesley, M.C. (2000). “Vibration Control of a Flexible Beam with Integrated Actuators and Sensors”, Smart Materials and Structures, 9(6): 932–939.CrossRefGoogle Scholar
  21. Moyo, P. (2002). “Structural Performance Monitoring and Health Assessment of Highway Bridges”, Ph. D. Thesis. Nanyang Technological University, Singapore.Google Scholar
  22. Oreta, A.W.C. and Tanabe, T. (1994). “Element Identification of Member Properties of Framed Structures”, Journal of Structural Engineering, 120(7): 1961–1976.CrossRefGoogle Scholar
  23. Pandey, A.K., Biswas, M. and Samman, M.M. (1991). “Damage Detection from Changes in Curvature Mode Shapes”, Journal of Sound and Vibration, 145(2): 321–332.CrossRefGoogle Scholar
  24. Pandey, A.K. and Biswas, M. (1994). “Damage Detection in Structures Using Changes in Flexibility”, Journal of Sound and Vibration, 169(1): 3–17.CrossRefMATHGoogle Scholar
  25. Pretorius, J., Hugo, M. and Spangler, R. (2004). “A Comparison of Packaged Piezoactuators for Industrial Applications”, Technical Note. Mide Technology Corporation, http://www.mide.com.Google Scholar
  26. Rogers, C.A., Barker, D.K. and Jaeger, C.A. (1988). “Introduction to Smart Materials and Structures”, Proceedings of U.S. Army Research Office Workshop on Smart Materials, Structures and Mathematical Issues, September 15–16, Virginia Polytechnic Institute & State University, Technomic Publishing Co., Inc., 17–28.Google Scholar
  27. Rogers, C.A. (1990). “Intelligent Material Systems and Structures”, Proceedings of U.S.-Japan Workshop on Smart/Intelligent Materials and Systems, edited by Ahmad, I., Crowson, A., Rogers C.A. and Aizawa, M., March 19–23, Honolulu, Hawaii, Technomic Publishing Co., Inc., 11–33.Google Scholar
  28. Sanayei, M. and Saletnik, M.J. (1996). “Parameter Estimation of Structures from Static Strain Measurements. I: Formulation”, Journal of Structural Engineering, 122(5): 555–562.CrossRefGoogle Scholar
  29. Sirohi, J. and Chopra, I. (2000a). “Fundamental Behaviour of Piezoceramic Sheet Actuators”, Journal of Intelligent Material Systems and Structures, 11(1): 47–61.Google Scholar
  30. Sirohi, J. and Chopra, I. (2000b). “Fundamental Understanding of Piezoelectric Strain Sensors”, Journal of Intelligent Material Systems and Structures, 11(4): 246–257.Google Scholar
  31. Song, G., Qiao, P.Z., Binienda, W.K. and Zou, G.P. (2002). “Active Vibration Damping of Composite Beam Using Smart Sensors and Actuators”, Journal of Aerospace Engineering, 15(3): 97–103.CrossRefGoogle Scholar
  32. Stubbs, N. and Kim, J.T. (1994). “Field Verification of a Nondestructive Damage Localization and Severity Estimation Algorithm”, Texas A & M University Report prepared for New Mexico State University.Google Scholar
  33. Sun, L., Li, H.N., Ren, L. And Jin, Q. (2007). “Dynamic Response Measurement of Offshore Platform Model by FBG sensors”, Sensors and Actuators A, 136: 572–579.CrossRefGoogle Scholar
  34. Takagi, T. (1990). “A Concept of Intelligent Materials”, Proceedings of U.S.-Japan Workshop on Smart/Intelligent Materials and Systems, edited by Ahmad, I., Crowson, A., Rogers C.A. and Aizawa, M., March 19–23, Honolulu, Hawaii, Technomic Publishing Co., Inc., 3–10.Google Scholar
  35. Thompson, M. and Harper, M. (2004). “Validation of a New Approach to Condition Monitoring of Offshore Structure—Aspects of a Scale Model”, Strain, 40: 25–31.CrossRefGoogle Scholar
  36. Varadan, V.K. and Varadan, V.V. (2002). “Microsensors, Micoelectromechanical Systems (MEMS) and Electronics for Smart Structures and Systems”, Smart Materials and Structures, 9(6): 953–972.Google Scholar
  37. Wang, M.L., Heo, G. and Satpathi, D. (1998). “A Health Monitoring System for Large Structural Systems”, Smart Materials and Structures, 7(5): 606–616.CrossRefGoogle Scholar
  38. Yao, J.T.P. (1985). Safety and Reliability of Existing Structures. London: Pitman Publishing Programme.Google Scholar
  39. Zhu, W. (2003). Sensors and Actuators (E6614 Lecture Notes). Nanyang Technological University, Singapore.Google Scholar
  40. Zimmerman, D.C. and Kaouk, M. (1994). “Structural Damage Detection Using a Minimum Rank Update Theory”, Journal of Vibration and Accoustics, 116: 222–231.CrossRefGoogle Scholar

Copyright information

© Zhejiang University Press, Hangzhou and Springer-Verlag Berlin Heidelberg 2012

Authors and Affiliations

  • S. Bhalla
    • 1
  • C. K. Soh
  1. 1.Department of Civil EngineeringIndian Institute of Technology DelhiNew DelhiIndia

Personalised recommendations