Strain Gauge Load Cells

Chapter
Part of the Springer Series in Materials Science book series (SSMATERIALS, volume 155)

Abstract

Load cell is a force transducer, which, after taking into account the effects of the acceleration due to gravity and air buoyancy at the location of its use, measures mass by converting the measured quantity (mass) into an electrical output.

Keywords

Load Cell Strain Gauge Test Load Performance Test Load Output 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    OIML, OIML Recommendations R-60, Metrological Regulations on Load Cells (OIML, Paris, 2000)Google Scholar
  2. 2.
    IS:9281, Indian standard specifications for electronic weighing systems (Part I) Terms and definitions, 1979 (Reaffirmed 1995)Google Scholar
  3. 3.
    IS:9281, Indian standard specifications for electronic weighing systems (Part II) Methods of measurements, 1981(Reaffirmed 1995)Google Scholar
  4. 4.
    IS:9281, Indian standard specifications for electronic weighing systems (Part III) requirements, 1981(Reaffirmed 1995)Google Scholar
  5. 5.
    IS:9281, Indian standard specifications for electronic weighing systems (Part IV) Code of practice for use and installation, 1983 (Reaffirmed 1995)Google Scholar
  6. 6.
    OIML, OIML Recommendation R-76, Non-automatic Weighing Instruments (Part 1): Metrological and Technical Requirements—Tests (OIML, Paris)Google Scholar
  7. 7.
    -04 IEC Publication 61000-4-11, Electromagnetic compatibility (EMC)—Part 4: Testing and measurement techniques—Section 11: Voltage dips, short interruptions and voltage variations immunity tests. Section 5.2 (Test levels—voltage variation), Section 8.2.2 (Execution of the test—voltage variation)Google Scholar
  8. 8.
    -04 IEC Publication 61000-4-11, Electromagnetic compatibility (EMC)—Part 4: Testing and measurement techniques–Section 11: Voltage dips, short interruptions and voltage variations immunity tests. Section 5.1 (Test levels—voltage dips and short interruptions), Section 5.1 (Execution of the test—voltage dips and short interruptions)Google Scholar
  9. 9.
    IEC 61000-4-4, No. 4 for instrumentation, No. 5 for test severity, No.7 for Test set-up and No. 8 for test procedureGoogle Scholar
  10. 10.
    IEC Publication 61000-4-2 Ed 1.1, Consolidated edition, Electromagnetic compatibility (EMC)—Part 4–2: Testing and measurement techniques—Electrostatic discharge immunity test, Nos. 4, 5, 7, 8Google Scholar
  11. 11.
    IEC Publication 61000-4-3 Ed 1.1, Consolidated edition, Electromagnetic compatibility (EMC)—Part 4–3: Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test, Nos. 4, 7 and 8Google Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2012

Authors and Affiliations

  1. 1.DelhiIndia

Personalised recommendations