Abstract
In order to strengthen the relevance and integrativity of research in the Cluster of Excellence, current best practice “business and technology cases” were selected. Hereby the theories, hypotheses, predictions and technology projects developed in the Cluster of Excellence are evaluated and advanced in close collaboration with leading production companies in Germany and Europe. To make the work more transparent, different application scenarios will be developed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Altmüller S (2001) Simultanes Fünf-Achs-Fräsen von Freiformflächen aus Titan. Diss. RWTH Aachen
Ayasse et al (2001) Interactive manipulation of voxel volumes with free-formed voxel tools. VM 2001, Stuttgart
Banse H (2005) Laserstrahllöten – Technologie zum Aufbau optischer Systeme. Dissertation, Jena
Banse H, Beckert E, Eberhardt RS, Vogel J (2005) Laser beam soldering – a new assembly technology for microoptical systems. Microsyst Technol 11:186–196
Bauer P, Bruzzone P, Portone A, Roth F, Vogel M, Vostner A, Weiss K (2007) Review of material properties, past experiences, procedures, issues and results for a possible solder filled cable as plan B conductor for the EFDA dipole magnet. infoscience | ecole polytechnique federale de lausanne
Beckert B, Hudetz W (2002) Stand und Potenzial produktnaher Datenverarbeitung. PPS Manag 7(2):35–39
Beckert E (2005) Ebene Keramiksubstrate und neue Montagetechnologien zum Aufbau hybridoptischer Systeme. Dissertation, Jena
Beckert E, Burkhardt T, Oppert T, Azdasht G (2007) Solder bumping – ein neues, flexibles AVTVerfahren. Fraunhofer IOF Jahresbericht
Belforte DA (2009) Keeping the economy in perspective. Ind Laser Solutions Manu 24(1):4–11
Brecher C, Loosen P, Schmitt R, Funck M, Morasch V, Dolkemeyer J, Pyschny N, Pavim A (2008) Flexibel automatisierte Montage von Festkörperlasern. wt online, 2009
Choi YB, Park SJ, Jeong KT, Park TS (2003) Patentnr. US20030116547
Cimatron Homepage [Online] Cimatron GmbH, (2011), http://www.cimatron.de
Davis CC (2000) Lasers and electro-optics: fundamentals and engineering. Cambridge University Press, Cambridge
DIN Deutsches Institut für Normung e V (1984) Begriffe im Zeichnungs- und Stücklistenwesen: Zeichnungen, Berlin(DIN 199-1)
Dolkemeyer J, Funck M, Morasch V (2010) Flexible Automatisierung in der Produktion der Zukunft. RWTH Themen, ISSN-Nr. 0179-079X (1/2010)
ElMaraghy H, Azab A, Schuh G, Pulz C (2009) Managing variations in products, processes and manufacturing systems. CIRP Ann 58(1):441–446
Eversheim W (1996) Grundlagen. Organisation in der Produktionstechnik Band 1. Studium und Praxis, 3rd edn. VDI, Düsseldorf
Eversheim W (2002) Arbeitsvorbereitung. Organisation in der Produktionstechnik Band 3. Organisation in der Produktionstechnik, Walter Eversheim, vol 3, 4th edn. Springer, Berlin
Eversheim W, Bleicher K, Brankamp K, Bender K (1999) Produktion und Management. Springer, Berlin
Frank U, Giese H, Klein F, Oberschelp O, Schmidt A, Schulz B, Vöcking H, Witting K (2004) Selbstoptimierende Systeme im Maschinenbau. Definitionen und Konzepte. HNI Verlag, Paderborn
Funck M, Loosen P (2009) Statistical simulation of selectively assembled optical systems. Proceedings SPIE
Funck M, Morasch V, Dolkemeyer J, Loosen P (2010) Design of a minaturized solid state laser for automated assembly. Proceedings SPIE
Gilbert X, Strebel P (1987) Strategies to outpace the competition. J Bus Strat 8(1):28–36
Glaeser G (1997) Efficient volume-generation during the simulation of NC-milling. In: Proceedings of the international workshop on visualization and mathematics’97. Springer, Heidelberg, pp 89–106
Gronau N (2010) Enterprise resource planning. Architektur, Funktionen und Management von ERP-Systemen. Lehrbücher Wirtschaftsinformatik, 2nd edn. Oldenbourg, München
Halldorsson T, Kroy W, Peuser P, Seidel H, Zeller P (1989) Patentnr. DE 3925201 A1
Hartmann D (1992) Anwendung wissensbasierter Informationstechnologie in Konstruktion und Planung – dargestellt an prototypischen Beispielen aus dem CAD CAP-Bereich der Bauindustrie und des Maschinenbaus. Fortschrittberichte VDI@Reihe 4, Bauingenieurwesen, vol 114. VDI, Düsseldorf
Hellmich K (2002) Wettbewerbsvorteile durch realisierte Kundenorientierung der Wertschöpfung. Ind Manag 18(5):27–30
Hufgard A, Hecht H (2005) Business integration mit SAP-Lösungen. Potenziale, Geschäftsprozesse, Organisation und Einführung. SAP Kompetent, 1st edn. Springer, Berlin
Hungenberg H, Wolf T (2007) Grundlagen der Unternehmensführung. Springer, Berlin
Jerard RB et al (1989) Approximate methods for simulation and verification of numerically controlled machining programs. Visual Comput 5(6):329–348
Klocke F et al (2001) Dynamikorientierte NC-Programme für die simultane 5-Achs-Hochgeschwindigkeitsbearbeitung, Fraunhofer-Institut für Produktionstechnologie IPT, Aachen
Klocke F et al (2003) Technologisch-optimale Prozesskette zwischen CAD-Geometrie und Bauteilfertigung. Tagungsband zum Seminar Wirtschaftliches Zerspanen – Intelligente Systeme für die Prozessauslegung und -simulation
Klocke F, Markworth L, Glasmacher L (2003) Simultaneous five-axis-machining of complex shaped parts. In: Proceedings of the 3rd International conference on machining and measurements of sculptured surfaces, pp 55–65
Klocke F et al (2007) Modelling of milling forces in a CAM-based system, CIRP conference on modelling of machining
Klocke F et al (2008) Model based optimization trochoidal roughing of titanium, 11th CIRP international conference on modeling of machining operations
Klocke F et al (2009a) Advanced simulation for rough machining titanium alloys. J Mach Sci Technol
Klocke F et al (2009b) CAM based material removal simulation and force extraction strategies, 12th CIRP international conference on modeling of machining operations
Koechner W (2006) Solid-state laser engineering. Springer, New York
Kölle J (1990) CAD/PPS-Integration. Konzepte und Erfahrungen. Hanser, München
König D (1994) Wissensbasierte Techniken zur automatisierten Arbeitsplanerstellung. Diss. Universität Dortmund, 1994. Fortschritt-Berichte VDIReihe 20, Rechnerunterstützte Verfahren, vol 118. VDI, Düsseldorf
Machine Works. Online (2011) http://www.machineworks.com
Markworth L (2005) Fünfachsige Schlichtfräsbearbeitung von Strömungsflächen aus Nickelbasislegierungen; Aachen, Dissertation, WZL der RWTH Aachen
Minoufekr M (2010) CAx-Prozessketten zur Fertigung und Reparatur von Turbomaschinenkomponenten. Tagungsband zum Seminar Potenziale und Trends im Bereich der CAD/CAM/NCVerfahrenskette
Morasch V, Funck M, Pyschny N, Pavim A (2009) Self-optimising flexible assembly systems. In: Proceedings of the selfx in engineering conference
Open Mind – The CAM Company (2011) http://www.openmind-tech.com/de
Paschotta R (2008) Field guide to laser pulse generation. SPIE Press, Bellington
Pfeifer T, Schmitt R (2006) Autonome Produktionszellen. Komplexe Produktionsprozesse flexibel automatisieren. Springer, Berlin
Pfeifer T, Schmitt R, Pavim A, Stemmer M, Roloff M, Schneider C, Doro M (2010) Cognitive production metrology: a new concept for flexibly attending the inspection requirements of small series production. In: Hinduja S, Li L (eds) Proceedings of the 36th international MATADOR conference. Springer, London, pp 359–362
Porter M (1980) Competitive strategy: techniques for analyzing industries and competitors. Free Press, New York
REFA (1985) Methodenlehre der Planung und Steuerung. Teil 1: Grundbegriffe, 4th edn. Hanser, München
Robert L et al (1987) Discrete simulation of NC machining. In: Proceedings of the third annual symposium on Computational geometry. Ontario, CA, pp 126–135. ISBN 0-89791-231-4
Schäppi B, Anreasen MM, Kirchgeorg M, Radermacher F-J (2005) Handbuch Produktentwicklung. Hanser, München
Scheer A (1990) CIM, computer integrated manufacturing. Der computergesteuerte Industriebetrieb, 4th edn. Springer, Berlin
Schmitt R, Pavim A, Brecher C, Pyschny N, Loosen P, Funck M, Dolkemeyer J, Morasch V (2009a) Flexibel automatisierte Montage von Festkörperlasern. Werkstatttechnik Online
Schmitt R, Wagels C, Isermann M (2009b) Production optimization by cognitive technologies. J Mach Eng 9(1):78–90. ISSN 1895-7595
Schmitt R, Laass M, Wagels C, Isermann M, Matuschek N (2010) Selbstoptimierende Produktionssysteme durch kognitive Technologien – Produktionsmanagement, Fertigungssteuerung, Arbeitsgestaltung. In: wt Werkstattstechnik online 100, 1/2, ISSN 1436-4980, pp 28–29
Schmitt R, Wagels C, Isermann M (2010a) Production optimization by cognitive controlling systems. In: Dimitrov D (Hrsg) Proceedings of the international conference on competitive manufacturing – COMA’ 10. Stellenbosch University Stellenbosch, Südafrika, pp 153–158. ISBN 978-0-7972-1322-7
Schmitt R, Wagels C, Isermann M, Matuschek N (2010b) Cognitive optimization of an automotive rear-axle drive production process. J Mach Eng 9(4):71–80. ISSN 1895-7595
Schneewind J (1994) Entwicklung eines systems zur integrierten Arbeitsplanerstellung und Fertigungsfeinplanung und -steuerung für die spanende Fertigung. Diss. RWTH Aachen, 1994. Berichte aus der Produktionstechnik, vol 94,8. Shaker, Aachen
Scholz-Reiter B, Höhns H (2007) Selbststeuerung logistischer Prozesse mit Agentensystemen. In: Schuh G (ed) Produktionsplanung und -steuerung, 3rd edn. Springer, Berlin
Schuh G, Lenders M, Arnoscht J (2009) Focussing product innovation and fostering economies of scale based on adaptive product platforms. CIRP Ann 58(1):131–134
Schuh G, Kampker A, Franzkoch B et al (2010) High resolution information management decentralized and self optimizing manufacturing control in a multi machine operating environment. Adv Intell Soft Comput 66:725–734
Schuh G, Stich V, Brosze T, Fuchs S, Pulz C, Quick J, Schürmeyer M, Bauhoff F (2011a) High resolution supply chain management – optimised processes based on self-optimizing control loops and real time data. Production Engineering, Sonderheft 1
Schuh G, Arnoscht J, Bohl A, Quick J, Kupke D, Nußbaum C, Vorspel-Rüter M (2011b) Assessment of the scale-scope dilemma in production systems. An integrative approach. In: Production engineering, 5 Special Issue
Scussat M, Würsch AC, Salathé RP (2000) An innovative flexible and accurate packaging technique suited to fabricate low cost micro optoelectronic modules. 50th Electronic components and technology conference
Seelert W, von Elm R (1997) Patentnr. DE19540140, 2000
Siegman AE (1986) Lasers. University Science Books, Sausalito
Soar Technology (2010). http://sitemaker.umich.edu/soar/home 15. Nov. 2010
Spur G, Krause F (1997) Das virtuelle produkt. Management der CAD-Technik. Hanser, München
Stautner M (2005) Simulation und Optimierung der mehrachsigen Fräsbearbeitung. Vulkan Verlag Essen, Dortmund
Strina G (1996) Anwendung von Prinzipien der Selbstähnlichkeit und Selbsterneuerung auf das Innovationsmanagement in kleinen und mittleren Produktionsbetrieben. Diss. RWTH Aachen, 1995. Fortschritt-Berichte VDIReihe 16, Technik und Wirtschaft, vol 83. VDI, Düsseldorf
Strohner H (1995) Kognitive systeme. Eine Einführung in die Kognitionswissenschaft. Westdeutscher Verlag, Opladen
Suhir E (1987) Die attachment design and its influence on thermal stresses in the die and the attachment. In: Proceedings of the 37th electronics components conference
Tayebati P, Holderer H (2007) Patentnr. DE102007004185
Thome R (2007) Business software. ERP, SCM, APS, MES – was steckt hinter dem Begriffsdschungel der Business-Software-Lösungen. Lehrstuhl für BWL und Wirtschaftinformatik, Mainfränkisches Electronic Commerce Kompetenzzentrum, Würzburg
Vajna S, Bley H, Hehenberger P, Weber C, Zeman K (2009) CAx für Ingenieure. Eine praxisbezogene Einführung, 2nd edn. Springer, Berlin
VDI (2010) Technologiezentrum European Technology Platform Photonics21. Lighting the way ahead
Warnecke H-J (1996) Die montage im flexiblen Produktionsbetrieb. Springer, Berlin
Wiendahl H (2002) Situative Konfiguration des Auftragsmanagements im turbulenten Umfeld. Diss. Universität Stuttgart, 2002. IPA-IAO-Forschung und Praxis, vol 358, Jost-Jetter, Heimsheim
Wiendahl H (2005) Stolpersteine der PPS. Symptome – Ursachen – Lösungsansätze. Institut für Industrielle Fertigung und Fabrikbetrieb (IFF), WI 2670/1 (DFG), Stuttgart
Wiendahl H (2010) Betriebsorganisation für Ingenieure, 7th edn. Hanser, München
Witt S (2007) Integrierte simulation von maschine, Werkstück und spanendem Fertigungsprozess. Dissertation, RWTH Aachen University, pp 40–41
Woods S, Pflanz T (2008) DPSS lasers rival – fiber lasers for marking applications. Laser Focus World
Zäh MF et al (2007) Kognitive Produktionssysteme – auf dem Weg zur intelligenten Fabrik der Zukunft. ZWF-Z Wirtsch Fabrikbetr 102(9):525–530
Zäh, MF et al (2008) The cognitive factory. In: ElMaraghy HA (ed) Changeable and reconfigurable manufacturing systems. Springer, Berlin
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Brecher, C. et al. (2012). Integrative Business and Technology Cases. In: Brecher, C. (eds) Integrative Production Technology for High-Wage Countries. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-21067-9_7
Download citation
DOI: https://doi.org/10.1007/978-3-642-21067-9_7
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-21066-2
Online ISBN: 978-3-642-21067-9
eBook Packages: EngineeringEngineering (R0)