Abstract
Under the supervision of Professor Bernd-Arno Behrens, the head of the Institute of Metal Forming and Metal-Forming Machines (IFUM), three PhD projects were carried out during the span of the Research Training Group 615 (GRK 615). All the projects originated in the Department of Numerical Methods, which is headed by Dr. Anas Bouguecha, and were related to finite element modeling and simulation of materials processing. Thus, Kanwar Bir Sidhu developed and implemented remeshing and rezoning algorithms to cope with severe plastic deformation and crack propagation in thin sheet blanking. The subject of Ilya Peshekhodov was a multiscale approach in modeling of forming processes of metal sheets coated with thin polymer composite coatings. With the help of the fluid mechanics approach, Thorsten Matthias modeled bulk forming processes of aluminum alloys in a semi-solid state. These projects are presented below along with some exemplary results.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
van der Aa, M.A.H.: Wall ironing of polymer coated metal. PhD Thesis, Eindhoven University of Technology (1999)
Atkinson, H.V.: Modelling of semisolid processing of metallic alloys. Progress in Materials Science 50, 314–412 (2005)
Atkinson, H.V.: Modelling of Semi-Solid Processing. Shaker Verlag, Germany (2008)
van den Bosch, M.J.: Interfacial delamination in polymer coated metal sheet. PhD Thesis, Eindhoven University of Technology (2007)
Brokken, D.: Numerical modelling of ductile fracture in blanking. PhD Thesis, Eindhoven University of Technology (1999)
Deflorian, F., Fedrizzi, L., Rossi, S.: Degradation of protective coatings after cupping test. Corrosion 55, 1003–1111 (1999)
Hirt, G., Kopp, R.: Thixoforming – Semi-Solid Metal Processing. Wiley-VCH, Germany (2009)
Heussen, J.M.M.: Untersuchungen zum Materialverhalten von Metallen im Bereich der Solidustemperatur. PhD Thesis, RWTH Aachen (1996)
Hohn, B.: Beitrag zur numerischen Simulation des Thixoformings, VDI Verlag, Germany (2002)
Homepage of Fluent Benelux (January 2010), http://www.polyflow.de
Hsu, Y.-L., Yu, C.-C.: Computer simulation of casting process of aluminium wheels: A case study. Journal of Engineering Manufacture 220, 203–211 (2006)
Messmer, G.: Gestaltung von Werkzeugen für das Thixo-Schmieden von Aluminium und Messinglegierungen in automatisierten Schmiedezellen. PhD Thesis, University of Stuttgart (2006)
Meuthen, B., Jandel, A.-S.: Coil Coating (Bandbeschichtung: Verfahren, Produkte und Märkte). Vieweg, Germany (2008)
Owen, D.R.J., Andrade Pires, F.M., Dutko, M.: Computational strategies for polymer coated steel sheet forming simulations. In: Cesar de Sa, J.M.A., Santos, A.D. (eds.) NUMIFORM 2007, Portugal (2007)
Oyane, M., Sato, T., Okimoto, K., Shima, S.: Criteria for ductile fracture and their applications. Mech. Work. Techn. 4, 65–81 (1980)
Oyen, M.L., Cook, R.F.: Load-displacement behavior during sharp indentation of viscous-elastic-plastic materials. Journal of Materials Research 18, 139–150 (2003)
Perera, D.Y.: Effect of pigmentation on organic coating characteristics. Progress in Organic Coatings 50, 247–262 (2004)
Rank, E., Schweingruber, M., Sommer, M.: Adaptive mesh generation and transformation of triangular to quadrilateral meshes. Communications on Numerical Methods in Engineering 9, 121–129 (1993)
Schaeper, E.-F.: Mehr Flexibilität und weniger Verschleißbeim Scherschneiden durch ein neues Werkzeugkonzept mit adaptivem Schneidspalt. PhD Thesis, Leibniz Universität Hannover (2008)
Vayeda, R., Wang, J.: Adhesion of coatings to sheet metal under plastic deformation. International Journal of Adhesion and Adhesive 18, 480–492 (2007)
Wahlen, A.: Processing of aluminium alloys in the semi-solid state. PhD Thesis, ETH Zürich (2001)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Behrens, B.A., Bouguecha, A., Sidhu, K.B., Matthias, T., Peshekhodov, I. (2011). New Strategies in Finite Element Analysis of Material Processing. In: Stephan, E., Wriggers, P. (eds) Modelling, Simulation and Software Concepts for Scientific-Technological Problems. Lecture Notes in Applied and Computational Mechanics, vol 57. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-20490-6_4
Download citation
DOI: https://doi.org/10.1007/978-3-642-20490-6_4
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-20489-0
Online ISBN: 978-3-642-20490-6
eBook Packages: EngineeringEngineering (R0)