Abstract
The ultrasonic motor using a longitudinal-torsional (L-T) hybrid vibration (LTUM) is a significant type of ultrasonic motor. The longitudinal and torsional vibrations are combined to generate the elliptic motions of points on a driving surface. The rotor is driven by the friction force between the stator and rotor. The tangential and axial direction vibrations of the point on the driving surface of LTUM can be excited by longitudinal and torsional piezoelectric pieces, respectively. In this way, the load characteristics of the motor can be controlled independently by changing two input voltages. One controls the rotary speed of the rotor, and the other controls the friction which transmits the driving force. While the motor operates, the contact area between the stator and rotor covers the whole end surface of the stator, which allows the motor to yield greater output torque. In general review, LTUMs can be divided into two main types: the first is a multi-mode type, which has the longitudinal and torsional vibrators in the stator. The second one is a mode conversion type, in which only one longitudinal vibration mode is involved, and the torsional vibration can be induced by the longitudinal vibration. LTUM can be applied to robots, saloon cars, household appliances, pinpoint devices, spacecrafts, and especially, where large torque at low speed is needed. Based on the research on LTUM in PDLab, this section expounds the movement mechanism, structural design and dynamic analysis of several LTUMs.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Chunsheng Zhao. Ultrasonic motor techniques in the 21st century. Journal of Vibration Measurement & Diagnosis, 2000, 20(1): 7–12. (in Chinese)
Heming Sun, Chunsheng Zhao, Xiaodong Zhu. Recent advances in ultrasonic motor using L-T vibration modes. Journal of Vibration Measurement & Diagnosis, 2002, 22(1): 9–14. (in Chinese)
K Nakamura, M Kurosawa, S Ueha, Characteristics of a hybrid transducer-type ultrasonic motor. IEEE, Transactions on Ultrasonics Ferroelectrics and Frequency Control, 1991, 38(3):189–193.
K Nakamura, S Ueha, Performances of a hybrid transducer type ultrasonic motor as a function of the size. IEEE Ultrasonics Symposium Proceedings, 1994, 1–3: 557–560.
J Satonobu, N Torh, K Nakamura, et al. Construction of megatorque hybrid transducer type ultrasonic motor. Japanese journal of Applied Physics, 1996, 35(9B): 5038–5041.
Y Tomikawa, K Adachi, M Aoyagi. Some constructions and characteristics of rod type piezoelectric ultrasonic motor using L-T vibrations. IEEE, Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 1992, 39(5): 600–608.
Hengbing Zhao, Xiaodong Liu, Yongxiao Chen, et al. Analysis of the structure of ultrasonic motor with large torque. Small & Special Electrical Machines, 1999, 27(4): 15–18. (in Chinese)
Heming Sun, Chunsheng Zhao. Structure optimization of ultrasonic motor using L-T mode. Micromotors Servo Technique, 2002, 35(4): 7–10. (in Chinese)
Heming Sun, Chunsheng Zhao, Xiaodong Zhu. Experimental study of ultrasonic motor using L-T mode. Small & Special Electrical Machines, 2002, 30(4): 3–8. (in Chinese)
Zheng Tao, Chunsheng Zhao. Brush type ultrasonic motor using L-T vibration modes. Chinese Invention Patent, 2004 10014953, 2004-05-20.
Zheng Tao. Research on Ultrasonic Motor Using L-T Vibrator. Dissertation for the Degree of Doctor of Philosophy. Nanjing: Nanjing University of Aeronautics and Astronautics, 2006. (in Chinese)
J van Randeraat, R E Setterington. Piezoelectric Ceramics. Beijing: Science Press, 1981. (in Chinese)
B Jaffe. Piezoelectric Ceramics. Beijing: Science Press, 1979. (in Chinese)
Tetsuro Tanaka. Piezoelectric Ceramic Materials. Beijing: Science Press, 1982. (in Chinese)
Daoren Song, Mingshan Xiao. Piezoelectric Effect and Applications. Beijing: Popular Science Press, 1987. (in Chinese)
Jinfeng Wang, Zutong Jiang, Ruida Shi. Piezoelectric Vibration. Beijing: Science Press, 1989. (in Chinese)
Fuxue Zhang, Liqun Wang. Modern Piezoelectricity. Beijing: Science Press, 2002. (in Chinese)
Wei Feng, Xizhong Wu, Yanding Wei, et al. Principle and research on the modal matching of the L-T composite USM. Micromotors Servo Technique, 2001, 34(6): 7–12. (in Chinese)
Zhongmao Lin. Principle and Design of Ultrasonic Horn. Beijing: Science Press, 1987. (in Chinese)
S Ueha, Y Tomikawa. Ultrasonic Motors Theory and Applications. Oxford: Oxford Science Publications, 1993.
Jifeng Guo, Shujuan Gong, Xiao Liu, et al. The study of characteristics on the L-T ultrasonic motor. Acta Acustica, 2003, 29(4): 334–340. (in Chinese)
Jifeng Guo, Yanding Wei, Xiao Liu, et al. Force transfering model of hybrid transducer type ultrasonic motor. Proceedings of the Chinese Society for Electrical Engineering, 2003, 23(5): 80–85.
D Karnopp. Computer simulation of stick-slip friction in mechanical dynamic systems. Journal of Dynamics Systems, Measurement, and Control, 1985, 107(1):100–103.
J Tsujino, A Suzuki. Load characteristics of ultrasonic motor with a longitudinal-torsional converter and various nonlinear springs for inducing static pressure. IEEE Ultrasonics Symposium. Atlanta, GA: IEEE, 2001:545–550.
J Tsujino, R Suzuki, H Yasojima. Load characteristics of ultrasonic rotary motor using a L-T vibration converter. IEEE Ultrasonics Symposium. San Antonio, TX: IEEE, 1996: 377–382.
J Tsujino, T Uchida, K Yamano. Ultrasonic plastic welding using two 27 kHz complex vibration systems. IEEE Ultrasonics Symposium. Toronto, Ont.: IEEE, 1997: 855–859.
Y Koike, F Magane, K Nakamura, et al. A vibration analysis of a L-T coupling vibrator with oblique slots. 1997 World Congress on Ultrasonics. Yokohama, 1997.
Shuyu Lin. Study on the L-T composite transducer with slanting slots. Acta Acustica, 1999, 24(1): 59–65. (in Chinese)
Jun Pi. L-T vibration converter of cylinder with multiple diagonal slits. Chinese Journal of Mechanical Engineering, 2008, 44(05): 242–248. (in Chinese)
Xiaoqing Ma. Impact Dynamics. Beijing: Beijing Institute of Technology Press, 1992. (in Chinese)
Hongwen Liu. Mechanics of Materials (on list). Beijing: Higher Education Press, 1992. (in Chinese)
Lin Yang, Jiamei Jin, Chunsheng Zhao. An ultrasonic rotary motor by using longitudinal-torsional vibration converter with holes. Journal of Vibration, Measurement & Diagnosis, 2009(2): 133–136. (in Chinese)
Lin Yang, Qingjun Ding, Chunsheng Zhao, et al. Load characteristics of ultrasonic motor using hongitudinaltorsional convertor with diagonal slits under various friction pairs. Proceedings of the CSEE, 2010 (15): 94–98. (in Chinese)
Junli Shi. Research on Mathematical Driving Model of Ultrasonic Motor and Its Frictional materials. Chengdu: Southwest Jiaotong University, 2004. (in Chinese)
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2011 Science Press Beijing and Springer Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Zhao, C. (2011). Ultrasonic Motor Using Longitudinal-Torsional Hybrid Vibration. In: Ultrasonic Motors. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-15305-1_8
Download citation
DOI: https://doi.org/10.1007/978-3-642-15305-1_8
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-15304-4
Online ISBN: 978-3-642-15305-1
eBook Packages: EngineeringEngineering (R0)