Abstract
Fully integrated mesoscale meterology–photochemical air pollution modelling has been underway in Australia since 1999. The focus has principally been on PC platforms using a graphical user interface, with performance and accuracy as key objectives to compare with statistical air quality objectives. Runs involving predictions for every hour for a year are commonplace.
More recently, Australian integrated modelling has expanded in scale, to include synoptic scales, using clever mapping approaches and more complex photochemistries. The findings will be included in routine weather forecasting outputs as CSIRO works closely with Australian Bureau of Meteorology to build ACCESS.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Azzi M, Cope ME, Day S, Huber G, Galbally IE, Tibbett A, Halliburton B, Nelson P F, Carras JN (2005) A biogenic volatile organic compounds emission inventory for the Metropolitan Air Quality Study (MAQS) region of NSW [electronic publication]. In: Towards a new agenda: 17th international clean air & environment conference proceedings. Clean Air Society of Australia and New Zealand, Hobart. [Hobart], 7 p. Available: http://www.cmar.csiro.au/e-print/open/cope_2005b.pdf
Cope ME, Hurley PJ, Lilley B, Edwards M, Azzi M, Beer T (2003) The use of a 10% ethanol-blended fuel in the Sydney greater metropolitan region: a modelling study of ozone air quality impacts: final report to Environment Protection Authority of New South Wales CAR:PSS:gy78. CSIRO Atmospheric Research, CSIRO Energy Technology, Aspendale, Vic, 13 p
Cope ME, Hess GD, Lee SH, Tory K, Azzi M, Carras JN, Lilley W, Manins PC, Nelson P, Ng YL, Puri K, Wong N, Walsh S, Young M (2004) The Australian air quality forecasting system. Part I: project description and early outcomes. J Appl Meteorol 43(5):649–662. doi:10.1175/2093.1
Cope ME, Hess GD, Lee SH, Tory KJ, Burgers M, Dewundege P, Johnson M (2005a) The Australian air quality forecasting system: exploring first steps towards determining the limits of predictability for short-term ozone forecasting. Bound Layer Meteorol 116(2):363–384
Cope ME, Lilley W, Marquez L, Smith N, Lee SH (2005b) A high resolution chemically reactive near-field dispersion model. Part 2: Application in an intelligent transport system [electronic publication]. In: Towards a new agenda: 17th international clean air & environment conference proceedings. Clean Air Society of Australia and New Zealand, Hobart. [Hobart], 6 p. Available: http://www.cmar.csiro.au/e-print/open/cope_2005d.pdf
Harman IN, Finnigan JJ (2007) A simple unified theory for flow in the canopy and roughness sublayer. Bound Layer Meteorol 123(2):339–363
Hess GD, Tory K, Cope ME, Lee SH, Puri K, Manins PC, Young M (2004) The Australian air quality forecasting system. Part II: case study of a Sydney 7-day. J Appl Meteorol 43(5):663–679
Hurley PJ (1999a) The air pollution model (TAPM) Version 1: technical description and examples. CSIRO Atmospheric Research, Aspendale. (CSIRO Atmospheric Research technical paper; no. 43). 41 p. Available: http://www.cmar.csiro.au/e-print/open/hurley_1999a.pdf
Hurley PJ (1999b) The air pollution model (TAPM) Version 1: user manual. CSIRO Atmospheric Research, Aspendale. (CSIRO Atmospheric Research internal paper; 12). 22 p. Available: http://www.cmar.csiro.au/e-print/open/hurley_1999b.pdf
Hurley PJ (2008a) The air pollution model (TAPM) version 4. Part 1. Technical description. CSIRO Atmospheric Research, Aspendale, Vic. Available: http://www.cmar.csiro.au//research/tapm/index.html
Hurley PJ (2008b) The air pollution model (TAPM) version 4. User manual. CSIRO Atmospheric Research, Aspendale, Vic. Available: http://www.cmar.csiro.au/research/tapm/index.html
Hurley PJ, Edwards M, Physick WL, Luhar AK (2005). TAPM V3: model description and verification. Clean Air Environ Qual 39(4):32–36. Available: http://www.cmar.csiro.au/e-print/internal/hurleypj_x2005d.pdf
Hurley PJ, Edwards M, Luhar AK (2008) The air pollution model (TAPM) version 4. Part 2. Summary of Some Verification Studies. CSIRO Atmospheric Research, Aspendale, Vic. Available: http://www.cmar.csiro.au/research/index.html
Johns T et al (2004) HadGEM1 – Model description and analysis of preliminary experiments for the IPCC Fourth Assessment Report. Hadley Centre Technical Note 55, Sep 2004. Available: http://www.metoffice.gov.uk/research/hadleycentre/pubs/HCTN/index.html
Kirstine W, Galbally IE (2004) A simple model for estimating emissions of volatile organic compounds from grass and cut grass in urban airsheds and its application to two Australian cities. J Air Waste Manag Assoc 54(10):1299–1311
Lilley W, Cope ME (2005) Development of a high resolution chemically reactive near-field dispersion model for assessing the impact of motor vehicle emissions. Part 1: Model description and validation. [electronic publication]. In: Towards a new agenda: 17th international clean air & environment conference proceedings. Clean Air Society of Australia and New Zealand, Hobart. [Hobart], 7 p
Luhar AK, Hurley PJ (2003) Evaluation of TAPM, a prognostic meteorological and air pollution model, using urban and rural point-source data. Atmos Environ 37(20):2795–2810
Luhar AK, Galbally IE, Keywood MD (2006a) Modelling PM10 concentrations and carrying capacity associated with woodheater emissions in Launceston, Tasmania. Atmos Environ 40(29):5543–5557
Luhar AK, Venkatram A, Lee SM (2006b) On relationships between urban and rural near-surface meteorology for diffusion applications. Atmos Environ 40(34):6541–6553
Malfroy H, Cope ME, Nelson PF (2005) An assessment of the contribution of coal-fired power station emissions to atmospheric particle concentrations in NSW a report prepared for: Delta Electricity, Eraring Energy and Macquarie Generation. Malfroy Environmental Strategies; CSIRO Energy Technology & CSIRO Atmospheric Research; Macquarie University Graduate School of the Environment, Sydney, NSW. iv, 95 p. Available: http://www.cmar.csiro.au/e-print/open/cope_2004b.pdf
Martin G et al (2004) Evaluation of the atmospheric performance of HadGAM/GEM1. Hadley Centre Technical Note 54, Sep 2004. Available: http://www.metoffice.gov.uk/research/hadleycentre/pubs/HCTN/index.html
McGregor JL (1997) Semi-Lagrangian advection on a cubic gnomonic projection of the sphere. In: Lin C, Laprise R, Ritchie H (eds) Numerical methods in atmospheric and oceanic modelling: the André J. Robert Memorial (Companion volume to atmosphere-ocean). Canadian Meteorological and Oceanographic Society, Ottawa, Canada, pp 153–169
McGregor JL, Dix MR (2005) The conformal-cubic atmospheric model: progress and plans. In: Workshop on high resolution atmospheric simulations and cooperative output data analysis, Yokohama, Japan. JSPS International Meeting Series. JSPS and JAMSTEC, Yokohama, 2 p. Available:http://www.es.jamstec.go.jp/esc/research/AtmOcn/hires2005/abstract/4-2_mcgregor.pdf
McGregor JL, Nguyen KC, Thatcher MJ (2007) Current CCAM modelling activities. AMOS 2007: 14th National Australian Meteorological and Oceanographic Society (AMOS) Conference in conjunction with Southern [Annular] Mode (SAM) Workshop: 5–8 February 2007, Adelaide, South Australia: climate water, and marine forecasting: challenges for the future [abstracts]., Adelaide, South Australia. Melbourne: AMOS. p 71. Available: http://www.cmar.csiro.au/e-print/open/cope_2005e.pdf
Physick WL, Noonan JA, McGregor JL, Hurley PJ, Abbs DJ, Manins PC (1994) LADM: a Lagrangian atmospheric dispersion model. CSIRO, Aspendale. CSIRO Division of Atmospheric Research technical paper; no. 24. 137 p. Available: http://www.cmar.csiro.au/e-print/open/physick_1994a.pdf
Physick WL, Cope ME, Lee SH, Hurley PJ (2006) Optimum exposure fields for epidemiology and health forecasting. 28th NATO/CCMS international technical meeting on air pollution modelling and its application: preprints: 15–19 May 2006, Leipzig, Germany. The Committee, Leipzig, pp 426–433
Physick WL, Cope ME, Lee SH, Hurley PJ (2007) An approach for estimating exposure to ambient concentrations. J Expo Sci Environ Epidemiol 17:76–83
Tory K, Cope ME, Hess GD, Lee SH, Puri K, Manins PC, Wong N (2004) The Australian air quality forecasting system. Part III: case study of a Melbourne 4-day photochemical smog event. J Appl Meteorol 43(5):680–695
Wain AG, Lee SH, Mills GA, Hess GD, Cope ME, Tindale N (2006) Meteorological overview and verification of HYSPLIT and AAQFS dust forecasts for the duststorm of 22–24 October 2002. Aust Meteorol Mag 55(1):35–46
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2010 Springer Berlin Heidelberg
About this chapter
Cite this chapter
Manins, P. et al. (2010). Integrated Modelling Systems in Australia. In: Baklanov, A., Alexander, M., Sokhi, R. (eds) Integrated Systems of Meso-Meteorological and Chemical Transport Models. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-13980-2_12
Download citation
DOI: https://doi.org/10.1007/978-3-642-13980-2_12
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-13979-6
Online ISBN: 978-3-642-13980-2
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)