Abstract
The logistic performance of a production system is reflected by its dynamics in operational condition. Both, internal and external factors influence the dynamic behaviour. While the influence on external factors, including for instance changing market conditions, is generally rather small, the internal factors are subject of factory planning and production planning and control. Especially job-shop-systems are often characterised by complex dynamic behaviour which is caused by their complex material flows. This paper describes an approach to analyse the role of dimensioning and structuring as subtasks of the factory planning process for job-shop-systems on the dynamics and therefore the influence on the logistic performance. By the combined application of simulation and data analysis within a generic model it is expected to identify general principles for the design of job-shop-systems. The results of the described undertaking are expected to improve standard planning methods for job-shop-systems by taking dynamic effects into account on an early basis.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Aurich J, Grzegorski A, Lehmann F (2007) Management vielfaltsinduzierter Prozesskomplexität in globalen Netzwerken. Industrie Management 6:13-16
Chen F, Drezner Z, Ryan J, Simchi-Levi D (2000) Quantifying the Bullwhip Effect in a Simple Supply Chain: The Impact of Forecasting, Lead Times, and Information. Management Science 46(3):436 - 443
Daganzo C A (2003) Theory of Supply Chains. Springer, New York
Duffie N A (1996) Heterarchical control of highly distributed manufacturing systems. International Journal of Computer Integrated Manufacturing, 9/4:270-281
Helbing D, Lämmer S, Witt U, Brenner T (2004a) Network-induced oscillatory behaviour in material flow networks and irregular business cycles. Physical Review E 70:056118
Helbing D, Lämmer S, Seidel T, Seba P, Platkowski T (2004b) Physics, Stability and Dynamics of Supply Networks. Physical Review E 70:066116
Helbing D, Lämmer S (2005) Supply and production networks: From the bullwhip effect to business cycles. In: Armbruster D, Mikhailov A S, Kaneko K (eds.) Networks of Interacting Machines: Production Organization. World Scientific, Singapore
Kantz H, Schreiber T (1997) Nonlinear Time Series Analysis. Cambridge University Press, Cambridge
Katzorke I, Pikovski A (2000) Chaos and complexity in a simple model of production dynamics. Discrete Dynamics in Nature and Society 5:179-187
Larsen E R, Morecroft J D W, Thomsen J S (1999) Complex behaviour in a production-distribution model. Europ J Op Res 119:61-74
Lee H L, Padmanabhan V, Whang S (1997) The bullwhip effect in supply chains. Sloan Management Review 38:93-102
Meyer C (2007) Integration des Komplexitätsmanagements in den strategischen Führungsprozess der Logistik. Haupt, Bern
Monostori L, Vancza K, Kumara S R T (2006) Agent-Based Systems for Manufacturing. CIRP Annals 55(2):697–720
Nagatani T, Helbing D (2004) Stability Analysis and Stabilization Strategies for Linear Supply Chains. Physica A 335:644–660
Pritschow G, Wiendahl H-P (1995) Application of control theory for production logistics - results of a joint project. CIRP Annals - Manufacturing Technology, 44/1:421–424
Radons G, Neugebauer R (eds.) (2004) Nonlinear Dynamics of Production Systems. Wiley, New York
Scherer E (1991) The Reality of Shop Floor Control – Approaches to Systems Innovation. In: Scherer E (ed.) Shop Floor Control – A Systems Perspective. Springer, Berlin
Schmigalla H (1969) Methoden zur optimalen Maschinenanordnung. VEB Verlag Technik, Berlin
Scholz-Reiter B, Freitag M, Schmieder A (2002a) Modelling and Control of Production Systems Based on Nonlinear Dynamics Theory. Cirp Annals 51/1:375-378
Scholz-Reiter B, Freitag M, Schmieder A (2002b) A dynamical approach for modelling and control of production systems. In: Boccaletti S et al. (eds.) Proc. 6th Experimental Chaos Conference. AIP Conference Proceedings 622(1):199–210
Scholz-Reiter B, Hamann T, Höhns H, Middelberg G (2004) Model Predictive Control Of Production Systems Using Partially Recurrent Neural Networks. Proceedings of the 4th CIRP - International Seminar on Intelligent Computation in Manufacturing Engineering, 93–97
Scholz-Reiter B, Hamann T, Zschintzsch M (2006) Cased-Based Reasoning for production control with neural networks. Proceedings of the 39th CIRP International Seminar on Manufacturing Systems, 233–240
Ushio T, Ueda H, Hirai K (1995) Controlling chaos in a switched arrival system. System Control Letters 26: 335–339
Wiendahl H-P (2007) Betriebsorganisation für Ingenieure. Hanser, München
Acknowledgments
This work was funded by German Research Foundation (DFG) under the reference number SCHO 540/15-1 “Application of Methods of Nonlinear Dynamics for the Structuring and Dimensioning of the Logistic System in Job-Shop-Systems”.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer -Verlag Berlin Heidelberg
About this paper
Cite this paper
Scholz-Reiter, B., Toonen, C., Tervo, J.T. (2011). Investigation of the Influence of Capacities and Layout on a Job-Shop-System’s Dynamics. In: Kreowski, HJ., Scholz-Reiter, B., Thoben, KD. (eds) Dynamics in Logistics. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-11996-5_35
Download citation
DOI: https://doi.org/10.1007/978-3-642-11996-5_35
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-11995-8
Online ISBN: 978-3-642-11996-5
eBook Packages: EngineeringEngineering (R0)