Abstract
To reduce the tonal noise of axial fans loudspeakers are typically used to generate the required anti-phase sound field. The space requirement and the weight of the loudspeakers inhibit practical application of this method. In the present study the secondary sound field is generated by injecting high speed air jets into the rotor blade tip regime. The air jets set up additional periodic forces on the blade tips which in turn form the required secondary acoustic sources. The jets are driven by a compressed air supply through small nozzles mounted flush with the inner casing wall. It has been shown, that this approach is very effective in controlling higher order mode sound fields at blade passage frequency and its harmonics. The main goal of the present work is to introduce fast feedback control to this application.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Tyler, J.M., Sofrin, T.G.: Axial flow compressor noise studies. Transactions of the Society of Automotive Engineers 70, 309–332 (1962)
Schulz, J., Neise, W., Möser, M.: Active noise control in axial turbomachineries by flow induced secondary sources. In: AIAA Paper 2002–2493, 8th AIAA/CEAS Aeroacoustics Conference, Breckenridge, Colorado, USA, June 17–19 (2002)
Schulz, J., Neise, W., Möser, M.: Active control of the blade passage frequency noise level of an axial fan with aeroacoustic sound sources. Noise Control Engineering Journal 54(1), 33–40 (2006)
Lemke, O., Neise, W., Möser, M., Enghardt, L.: Control of higher-order modes at blade passage frequency harmonics of axial turbomachines by steady air jet actuation. In: Fan Noise 2007, Lyon, France, September 17-19 (2007)
Lemke, O., Neise, W., Enghardt, L., Möser, M.: Control of tonal fan noise using flow induced secondary sound sources generated by air jet actuation. In: AIAA Paper 2009–3227, 15th AIAA/CEAS Aeroacoustics Conference, Miami, Florida, USA, May 11-13 (2009)
Ashcroft, G., Schulz, J.: Numerical modelling of wake-jet interaction with application to active noise control in turbomachinery. In: AIAA Paper 2004–2853, 10th AIAA/CEAS Aeroacoustics Conference, Manchester, UK, May 10–12 (2004)
Fitel, E.B., Wooward, R.P., Podboy, G.G.: Effect of trailing edge flow injection on fan noise and aerodynamic performance. In: 3rd AIAA Flow Control Conference, San Francisco, California, USA, June 5-8 (2006)
Garwon, M., Schulz, J., Satriadarma, B., King, R., Möser, M., Neise, W.: Adaptive and robust control for the reduction of tonal noise components of axial turbomachinery with flow control. In: 30. Deutsche Jahrestagung für Akustik, 7. Congrès Français d’Acoustique, CFA/DAGA 04, Strasbuorg, France, March 22-25 (2004)
Lemke, O., Becker, R., Feuerbach, G., Neise, W., King, R., Möser, M.: Active blade tone control in axial turbomachines by flow induced secondary sources in the blade tip regime. In: Active Flow Control Conference, Berlin, Germany, Sepember 27-29 (2006)
Lemke, O., Becker, R., Neise, W., King, R., Möser, M.: Reduction of axial turbomachinery tonal noise by means of flow induced secondary sources using an extremum-seeking control technique. International Journal of Aeroacoustics (IJA) 6(1), 31–43 (2007)
Enghardt, L., Zhang, Y., Neise, W.: Experimental verification of a radial mode analysis technique using wall-flush mounted sensors. In: Paper 3PPA5, 13th Meeting of the Acoustical Society of America and 2nd Convention of the European Acoustics Association, Berlin, Germany (1999)
Henning, L., Becker, R., Feuerbach, G., Muminovic, R., Brunn, A., Nitsche, W., King, R.: Extensions of adaptive slope-seeking for active flow control. Proc. IMechE, Part I: J. Systems and Control Engineering 222(5), 309–322 (2008)
Gelb, A.: Applied optimal estimation, 10th printing. The M.I.T. Press, Cambridge (1988)
Ljung, L.: System identification: theory for the user, 2nd edn. Prentice Hall, Upper Saddle River (1999)
Skogestad, S., Postlethwaite, I.: Multivariable Feedback Control - Analysis and Design, 2nd edn., Chichester, England (2005)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2010 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Lemke, O., Neise, W., Enghardt, L., King, R., Muminovic, R., Möser, M. (2010). Closed Loop Blade Tone Control in Axial Turbomachines by Flow Induced Secondary Sources in the Blade Tip Regime. In: King, R. (eds) Active Flow Control II. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol 108. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-11735-0_10
Download citation
DOI: https://doi.org/10.1007/978-3-642-11735-0_10
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-11734-3
Online ISBN: 978-3-642-11735-0
eBook Packages: EngineeringEngineering (R0)