Abstract
This pilot study presents an approach to generate percentile values for joint torque characteristics of digital human models. Detailed angle specific joint torque measurements of few subjects are set in relation to extensive measurements of external maximum forces including percentile values based on many subjects by using muti-body simulation. Results indicate the applicability of the approach but do not generate results of high validity due to some sources of errors along the process. More experiments solving these issues and generating valid results are being planned.
Chapter PDF
Similar content being viewed by others
Keywords
References
Bubb, H., Fritzsche, F.: A Scientific Perspective of Digital Human Models: Past, Present and Future. In: Duffy, V.G. (ed.) Handbook of digital human modeling. Research for applied ergonomics and human factors engineering, Boca Raton, Fla. (2009)
Rasmussen, J., Christensen, S.T., Dahlquist, J., Damsgaard, M., de Zee, M.: AnyBody - A quantitative ergonomic design method. In: Olsen, K.B. (ed.) Working life ethics. Proceedings from Nordic Ergonomics Society 36th annual conference 2004, Hotel Comwell, Kolding, Danmark, Monday 16 - Wednesday 18 August 2004, Kolding (2004)
Seitz, T., Recluta, D., Zimmermann, D., Wirsching, H.-J.: FOCOPP - An approach for a human posture prediction model using internal/external forces and discomfort. In: Proceedings of the SAE DHMC (Digital Human Modeling Conference) (2005)
Fritzsche, F.: Kraft- und Haltungsabhängiger Diskomfort unter Bewegung - berechnet mit Hilfe eines digitalen Menschmodells, Dissertation am Lehrstuhl für Ergonomie der Technischen Universität München, München (in press, 2009)
Rühmann, H.: Körperkräfte des Menschen. Perzentilierung isometrischer Maximalkräfte sowie Ausdauer und Beanspruchung bei konzentrischer und exzentrischer Muskelarbeit; Kolloquium des Lehrstuhls für Ergonomie der Technischen Universität München zum HdA-Projekt "Körperkräfte des Menschen Teil II". Köln (1992)
Schaefer, P., Schwarz, W.: Target group ergonomics. In: European Standardization - force limits reflecting demographic profiles. In: Proceedings of the IEA 2006 conference (2006)
Mital, A., Kumar, S.: Human muscle strength definitions, measurement, and usage: Part I - Guidelines for the practitioner. International Journal of Industrial Ergonomics 22, 101–121 (1998)
Mital, A., Kumar, S.: Human muscle strength definitions, measurement, and usage: Part II - The scientific basis (knowledge base) for the guide. International Journal of Industrial Ergonomics 22, 123–144 (1998)
Kroemer, K.H.E.: Die Messung der Muskelstärke des Menschen. Methoden und Techniken. Bremerhaven (1977)
Daams, B.J.: Human force exertion in user-product interaction. backgrounds for design. Delft (1994)
Glitsch, U., Ellegast, R., Schaub, K., Wakula, J., Berg, K.: Biomechanische Analyse von Ganzkörperkräften in unterschiedlichen Körperhaltungen. In: Gesellschaft für Arbeitswissenschaft (ed.). Produkt- und Produktions-Ergonomie - Aufgabe für Entwickler und Planer - Bericht zum 54. Kongress der Gesellschaft für Arbeitswissenschaft. Dortmund (2008)
Rohmert, W., Rückert, A., Schaub, K.: Körperkräfte des Menschen. Darmstadt (1992)
Amis, A.A., Dowson, D., Wright, V.: Elbow joint force predictions for some strenuous isometric actions. Journal of Biomechanics 13, 765–775 (1980)
Winter, D.A.: Overall principle of lower limb support during stance phase of gait. Journal of Biomechanics 13, 923–927 (1980)
Nijhof, E.J., Gabriel, D.A.: Maximum isometric arm forces in the horizontal plane. Journal of Biomechanics 39, 708–716 (2006)
Anderson, D.E., Madigan, M.L., Nussbaum, M.A.: Maximum voluntary joint torque as a function of joint angle and angular velocity: Model development and application to the lower limb. Journal of Biomechanics 40, 3105–3113 (2007)
Bubb, H.: Research for a Strenght Based Discomfort Model of Posture and Movement. In: Proceedings of the IEA 2003 conference (2003)
Schaefer, P., Rudolph, H., Schwarz, W.: Digital Man Models and Physical Strength – A New Approach in Strength Simulation. In: Proceedings of the SAE DHMC (Digital Human Modeling Conference) (2000)
Rothaug, H.: Combined Force-Posture Model for Predicting Human Postures and Motion by Using the Ramsis Human Model. In: Proceedings of the SAE DHMC (Digital Human Modeling Conference) (2000)
Seitz, T., Bubb, H.: Measuring of Human Anthropometry, Posture and Motion. In: Proceedings of the SAE DHMC (Digital Human Modeling Conference) (1999)
Härtel, T., Hermsdorf, H.: Biomechanical modelling and simulation of human body by means of DYNAMICUS. Abstracts of the 5th World Congress of Biomechanics. Journal of Biomechanics 39, S549–S549 (2006)
Kumar, S.: Muscle strength. Boca Raton (2004)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Engstler, F., Bubb, H. (2009). Generation of Percentile Values for Human Joint Torque Characteristics. In: Duffy, V.G. (eds) Digital Human Modeling. ICDHM 2009. Lecture Notes in Computer Science, vol 5620. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-02809-0_11
Download citation
DOI: https://doi.org/10.1007/978-3-642-02809-0_11
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-02808-3
Online ISBN: 978-3-642-02809-0
eBook Packages: Computer ScienceComputer Science (R0)