Abstract
Automotive industry is using increasingly structural bonding in a wider sense. This technology is already commonly used for hoods and doors and for windshield bonding. With the availability of a new generation of structural adhesives for the body shop, these adhesives contribute to build lighter car bodies with increased crash performance. The general requirements for adhesives in automotive production are outlined. The key properties of the various structural adhesives are described and the elements for the evaluation of adhesives with the right properties are mentioned. This chapter serves as a guideline for the evaluation of the right adhesive technology from an engineering point of view and will help to increase the use of this joining method to produce cars which cope with the future challenges for lightweight design.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
ATZ extra (2010) Presentation of the new AUDI A 1
Bieker C, Schlimmer M (2004) Berechnung und Auslegung von Klebverbindungen (Teil 3), Adhäsion, Kleben & Dichten 7:38–42
Bornemann J, Schlimmer M (2004) Berechnung und Auslegung von Klebverbindungen (Teil 1) Adhäsion, Kleben & Dichten 5:30–33
Bornemann J, Schlimmer M (2004) Berechnung und Auslegung von Klebverbindungen (Teil 2) Adhäsion, Kleben & Dichten 6:40–42
Brockmann, W, Grüner KJ(2003) Betrachtung zum Kriechverhalten von Haftklebstoffen, 17. Internationales symposium Swissbonding, Rapperswil
Burchardt B, Diggelmann K, Koch St, Lanzendörfer B (1998) Elastic bonding. Verlag Moderne Industrie, Landsberg
Burchardt B, Schulenburg JO, Linnnenbrink M (2009) New building blocks for lightweight structures Adhesion, Adhesives & Sealants 10:22–27
Cognard Ph (2006) Handbook of adhesives and sealants, vol 2, General knowledge, application techniques, new curing techniques. Elsevier, New York
Deimel A (1993) Fachhochschule München, Einfluss der Klebstoffsteifigkeit auf das Verformungsverhalten geklebter Fahrzeugkomponenten, Diploma work
Hahn O, Wiβling M (2007) Methodenentwicklungzur Berechnung von höherfesten Stahlklebeverbindungen des Fahrzeugbaus unter Crashbelastung, Abschlussbericht Forschungsvereiningung Stahlanwendung e.V. Düsseldorf
Lutz A (2009) Crash resistant two-component adhesives for repairs “As good as new” Adhesion extra Adhesives & Sealants 10:28–29
Rechner R, Jansen I, Beyer E (2010) Laser- und Plasmaverfahren im wirtschaftlichen Vergleich, Adhäsion, Kleben & Dichten 1–2:36–43
Schulz D (2010) Gut gereinigt ist halb geklebt, Adhäsion, Kleben & Dichten 7–8:18–22
Stepanski H (2010) Punktschweisskleben im Automobilbau Adhäsion, Kleben & Dichten 5:30–35, 6:35–41
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer-Verlag Berlin Heidelberg
About this entry
Cite this entry
Burchardt, B. (2011). Automotive Industry. In: da Silva, L.F.M., Öchsner, A., Adams, R.D. (eds) Handbook of Adhesion Technology. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-01169-6_46
Download citation
DOI: https://doi.org/10.1007/978-3-642-01169-6_46
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-01168-9
Online ISBN: 978-3-642-01169-6
eBook Packages: EngineeringReference Module Computer Science and Engineering