Abstract
An application of contra-rotating rotors, in which a rear rotor is in tandem with a front one and these rotors rotate in the opposite direction each other, has been proposed against a demand for developing higher specific speed axial flow pump. It is necessary to understand the internal flow behavior for higher performance design. In the present study, limiting streamlines on the blade passage walls were observed by multi-colored oil-film method at design and partial flow rates. The flow behaviors are discussed by observed results of limiting streamlines with measured results of blade-to-blade velocity distribution by Laser Doppler velocimetry and static head distributions on casing wall by pressure sensors.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Wada, A. and Uchida, S., 1999, “Improvement of Performance for Higher Specific Speed Axial-Flow Pump”, Torishima Review, (in Japanese) 13, pp.32–35
White, J. W., Purnell, J. G. and Stricker, J. G., 1993, “In-Line Submersible Pump”, Proc. ASME, FED Summer Meeting, Pa. No. 246, pp.1–8
Furukawa, A., Cao, Y., Okuma, K. and Watanabe, S., 2000, “Experimental Study of Pump Characteristics of Contra-Rotating Axial Flow Pump”, Proc. 2 nd Int. Symp. on Fluid Machinery and Fluid Eng., Beijing, 67–657, pp. 245–252
Furukawa, A., Shigemitsu, T. and Watanabe, S., 2007, “Performance Test and Flow Measurement on Contra-Rotating Axial Flow Pump”, J. Thermal and Science, 16-1, pp.7–13
Shigemitsu, T. et al., 2002, “Experimental Study on Rear Rotor Design in Contra-Rotating Axial Flow Pump”, Proc. 5 th JSME/KSME Fluids Eng. Conf., Nagoya, pp.1453–1548
Shigemitsu, T. Furukawa, A., Watanabe, S. and Okuma, K., 2005, “Air/water Two-phase Flow Performance of Contra-Rotating Axial Flow Pump and Rotational Speed Control of Rear Rotor”, Proc. FEDSM2005 ASME, Pa. No.77002, pp.1–6
Shigemitsu, T. Fukuyama, T., Furukawa, A., Okuma, k. and Watanabe, S., 2007, “Flow Measurement with LDV in Contra-Rotating Axial Flow Pump”, Proc. 23 rd IAHR Symposium, Yokohama, No.045, pp.1–10
Yamashita, S. Watanabe, S., Okuma, K., Shirasawa, K. and Furukawa, A., 2005, “Flow Measurement at Partial Flow Rate with LDV around Rear Rotor of Contra-Rotating Axial Flow Pump”, Proc. 5 th ASME/JSME Fluids Eng. Conf., Pa. No.3727, pp.1–6
Furukawa, A., Takano, T., Shigemitsu, T., Okuma, K. and Watanabe, S., 2006, “Blade Rows Interaction of Contra-Rotating Axial Flow Pump in Pressure Field on Casing Wall”, JSME Int. J., Ser.B, 49-3, pp. 670–677
Goto, A., Zangeneh, M. and Takemura, T., 1996, “Suppression of Secondary Flows in a Mixed Flow Pump Impeller by Application of 3-D Inverse Design Method; Part2—Experimental Validation”, ASME J. Turbomachinery, Vol.118, pp. 544–551
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Tsinghua University Press, Beijing and Springer-Verlag GmbH Berlin Heidelberg
About this paper
Cite this paper
Furukawa, A., Usami, S., Tsunenari, Y., Watanabe, S., Okuma, K. (2009). Limiting Streamlines Measurement in Contra-Rotating Axial Flow Pump. In: Xu, J., Wu, Y., Zhang, Y., Zhang, J. (eds) Fluid Machinery and Fluid Mechanics. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-89749-1_21
Download citation
DOI: https://doi.org/10.1007/978-3-540-89749-1_21
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-89748-4
Online ISBN: 978-3-540-89749-1
eBook Packages: EngineeringEngineering (R0)