Abstract
The skeletons of the wing-bearing segments of advanced insects show unexploited potential in the design of biomimetic flapping MAVs. They consist of thin, springy, composite shells, cyclically deformed by large, enclosed muscles to flap the wings as first-order levers over lateral fulcra. The wings are light, flexible, membrane-covered frameworks, with no internal muscles, whose deformations in flight are encoded in their structure; they are ‘smart’ aerofoils. Both thorax and wings are apparently resonant structures, storing energy elastically, and tuned to deform appropriately at their operating frequencies. The form of the basic wing stroke is determined structurally, but is modulated by a series of controlling muscles, contracting tonically to alter the positions of skeletal components over the course of several stroke cycles. Fuel economy through lightness, low wing inertia and cyclic energy storage are all desirable in a flapping MAV. Furthermore, the insects’ peculiar combination of structural automation with modulation has great potential in achieving versatile kinematics with relatively few actuators. Aspects of the thoracic functioning of an advanced fly can be simulated in a simple card flapping model, combining the properties of a closed four-bar linkage with the elastic lateral buckling of a domed shell. Instructions for building this are included. Addition of further degrees of freedom, along with biomimetic smart wings, would seem to allow other crucial kinematic variables to be introduced and controlled with minimum actuation, and ways are suggested how this might be achieved in a sophisticated mechanism.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Avadhanula, S., Wood, R.J., Steltz, E. Yan, J., Fearing, R.S.: Lift force improvements for the Micromechanical Flying Insect. IEEE International Conference on Intelligent Robots and Systems 1350–1356 (October 2003)
Banala, S., Agrawal, S.K.: Design and optimization of a mechanism for out-of-plane insect wing-like motion with twist. Transactions ASME, Journal of Mechanical Design 127, 817–824 (2005)
Betts, C.R.: The kinematics of Heteroptera in free flight. Journal of Zoology B 1, 303–315 (1986)
Conn, A.T., Burgess, S.C., Ling, S.C.: Design of a parallel crank-rocker flapping mechanism for insect-inspired micro air vehicles. Proceedings of the Institution of Mechanical Engineers C. Journal of Mechanical Engineering Science 221(10), 1211–1222 (2007)
Dickinson, M.H., Lehmann, E.O., Sane, S.P.: Wing rotation and the aerodynamic basis of insect flight. Science 284, 1954–1960 (1999)
Dudley, R.: The Biomechanics of Insect Flight. Princeton University Press. Princeton, N.J. (2000)
Ellington, C.P.: The aerodynamics of hovering insect flight. III. Kinematics. Philosophical Transactions of the Royal Society London B 305, 41–78 (1984)
Ellington, C.P.: The aerodynamics of hovering insect flight. IV Aerodynamic mechanisms. Philosophical Transactions of the Royal Society London B 305, 79–113 (1984)
Ennos, A.R.: A comparative study of the flight mechanism of Diptera. Journal of Experimental Biology 127, 355–372 (1987)
Ennos, A.R.: The kinematics and aerodynamics of the free flight of some Diptera. Journal of Experimental Biology 142, 49–85 (1989)
Ennos, A.R.: Mechanical behaviour in torsion of insect wings, blades of grass, and other cambered structures. Procedings of the Royal Society London B 259, 15–18 (1995)
Galinski, C., Zbikowski, R.: Insect-like flapping wing mechanism based on a double spherical Scotch yoke. Journal of the Royal Society Interface 2(3), 223–235 (2005)
Greenwalt, C.H.: The wings of insects and birds as mechanical oscillators. Proceedings of the American Philosophical Society 104, 605–611 (1960)
Khan, Z.A., Agrawal, S.K.: Design of flapping mechanisms based on transverse bending mechanisms in insects. Proceedings of the 2006 IEEE International Conference on Robotics and Automation, Orlando, Florida, 2323–2328 (2006)
Madangopal, R., Khan, Z.A., Agrawal, S.K.: Biologically inspired design of small flapping wing air vehicles using four-bar mechanisms and quasi-steady aerodynamics. Journal of Mechanical Design 127(4), 809–816 (2005)
Madangopal, R., Khan, Z.A., Agrawal, S.K.: Energetics-based design of small flapping-wing micro air vehicles. IEEE/ASME Transactions on Mechatronics 11(4), 433–438 (2006)
McIntosh, S.H., Agrawal, S.K., Khan, Z.A.: Design of a mechanism for biaxial rotation of a wing for a hovering vehicle. IEEE/ASME Transactions on Mechatronics 11(2), 145–153 (2006)
Mukerjee, S., Sanghi, S.: Design of a six-link mechanism for a micro air vehicle. Defence Science Journal 54, 271–276 (2004)
Nachtigall, W.: Mechanics and aerodynamics of flight. In: G.J. Goldsworthy, C.H. Wheeler (eds.) Insect Flight, pp. 1–28. CRC Press Inc. Boca Baton (1989)
Neville, A.C.: Biology of Fibrous Composites: Development Beyond the Cell Membrane. Cambridge University Press, Cambridge, U.K. (1993)
Newman, D.J.S., Wootton, R.J.: An approach to the mechanics of pleating in dragonfly wings. Journal of Experimental Biology 125, 361–372 (1986)
Steltz, E., Wood, R.J., Avadhanula, S., Fearing, R.S.: Characterization of the Micromechanical Flying Insect by optical position sensing. Proceedings of the 2005 IEEE International Conference on Robotics and Automation, Barcelona 1–4, 1252–1257 (2005)
Vincent, J.F.V.: Insect cuticle: a paradigm for natural composites. In: J.F.V. Vincent, J.D. Currey (eds.) The Mechanical Properties of Biological Materials, pp. 183–210. Symposia of the Society for Experimental Biology 34. Cambridge University Press, Cambridge UK (1980)
Vogel, S.: Cats’ Paws and Catapults. 382 pp. W.W. Norton and Company New York (1998)
Wakeling, J.M., Ellington, C.P.: Dragonfly flight. II. Velocities, accelerations and kinematics of flapping flight. Journal of Experimental Biology 200, 557–582 (1997)
Weis-Fogh, T.: Quick estimates of flight fitness in hovering animals, including novel mechanisms for lift production. Journal of Experimental Biology 59, 169–230 (1973)
Wilmott, A.P., Ellington, C.P. The mechanics of flight in the hawkmoth Manduca sexta. I. Kinematics of hovering and forward flight. Journal of Experimental Biology 200, 2705–2722 (1997).
Wisser, A., Nachtigall, W.: Functional-morphological investigations on the flight muscles and their insertion points in the blowfly Calliphora erythrocephala (Insecta, Diptera). Zoomorphology 104, 188–195 (1984)
Wisser, A., Nachtigall, W.: Mechanism of wing rotating regulation in Calliphora (Insecta, Diptera). Zoomorphology 111, 111 (1987).
Wood, R.J.: Design, fabrication and analysis of a 3 DOF, 3 cm flapping-wing MAV. IEEE/RSJ IROS, San Diego, CA, (October 2007).
Wood, R.J.: The first take off of a biologically-inspired at-scale robotic insect. IEEE Transactions on Robotics 24 (2), 341–347 (2008).
Wootton, R.J.: Support and deformability in insect wings. Journal of Zoology London 193, 447–468 (1981)
Wootton, R.J.: Functional morphology of insect wings. Annual Review of Entomology Palo Alto 37, 113–140 (1992)
Wootton, R.J.: Leading edge section and asymmetric twisting in the wings of flying butterflies. Journal of Experimental Biology 180, 105–117 (1993)
Wootton, R.J., Herbert, R.C., Young, P.G., Evans, K.E.: Approaches to the structural modelling of insect wings. Philosophical Transactions of the Royal Society London B 358, 1577–1587 (2003)
Zbikowski, R., Galinski, C., Pedersen, C.B.: Four-bar linkage mechanism for insectlike flapping wings in hover: Concept and an outline of its realization. Journal of Mechanical Design 127, 817–824 (2005)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Wootton, R.J. (2009). Springy Shells, Pliant Plates and Minimal Motors: Abstracting the Insect Thorax to Drive a Micro-Air Vehicle. In: Floreano, D., Zufferey, JC., Srinivasan, M., Ellington, C. (eds) Flying Insects and Robots. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-89393-6_15
Download citation
DOI: https://doi.org/10.1007/978-3-540-89393-6_15
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-89392-9
Online ISBN: 978-3-540-89393-6
eBook Packages: EngineeringEngineering (R0)