Abstract
Site investigations and assessment require a thorough understanding of the geology of the site. The following aspects or parts thereof must be taken into account: stratigraphic sequence, thickness and lateral extent of strata and other geological units, lithology, homogeneity and heterogeneity, bedding conditions, tectonic structures, fractures, and impact of weathering. Information about landforms (geomorphology), earthquake risk, activity of faults, land sliding, subsidence and caving to the surface as a result of mining and karst must also be collected. Planning of an investigation must take into account accessibility, whether the surficial rock is unconsolidated or consolidated and the investigation methods must be appropriate for the geological/hydrogeological conditions.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References and further reading
Aller, L., Bennett, T. W., Hackett, G., Petty, R. J., Lehr, J. H., Sedoris, H., Nielson, D. M. & Denne, J. E. (1989): Handbook of suggested practices for the design and installation of ground-water monitoring wells. National Water Well Association, Dublin, Ohio.
Altlastenhandbuch des Landes Niedersachsen(1997): Niedersächsisches Landesamt für Ökologie und Niedersächsisches Landesamt für Bodenforschung (Ed.). Springer, Berlin.
ASTM D 5778 (1995): Standard Test Method for Performing Electronic Friction Cone and Piezocone Penetration Testing of Soils. Reapproved 2000. American Society for Testing and Materials, West Conshohocken, Pennsylvania, USA.
ASTM D 6001 (1996): Standard Guide for Direct-Push Water Sampling for Geoenvironmental Investigations. Reapproved 2002. Superseded by: ASTM D 6001 (2005). Standard Guide for DirectPush Water Sampling for Geoenvironmental Investigations.
ASTM D 6187 (1997): Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence. Reapproved 2003.
ASTM D 6282 (1998): Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations. Reapproved 2005.
Bracke, R. (2002): Direct-Push Technologien — Der Einsatz von DP-Verfahren für Geomonitorings und baugrundtechnische Untersuchungen. Ecos, Aachen.
Brouwer, J. J. M. (2002): Guide to Cone Penetration Testing — On shore and near shore. www.conepenetration.com/cpt3.html#test
DIN 4020 (2003): Geotechnische Untersuchungen für bautechnische Zwecke. Geotechnical investigations for civil engineering purposes. Beuth, Berlin.
DIN 4021 (1990): Aufschluss durch Schürfe und Bohrungen sowie Entnahme von Proben. Soil; exploration by excavation and borings; sampling. Note: To be replaced by DIN EN ISO 22475-1 (2004-08). Beuth, Berlin.
DIN 4022: Baugrund und Grundwasser; Benennen und Beschreiben von Boden und Fels. Subsoil and groundwater; classification and description of soil and rock. Teil l (1987): Schichtenverzeichnis für Bohrungen ohne durchgehende Gewinnung von gekernten Proben im Boden und im Fels. Part 1 (1987). Borehole logging of soil and rock not involving continuous core sample recovery. Note: To be replaced by DIN EN ISO 224751 (2004-08), DIN ISO 14689 (1997-01, t). Teil 3 (1982). Schichtenverzeichnis für Bohrungen mit durchgehender Gewinnung von gekernten Proben im Boden. Part 3 (1982). Borehole log for boring in soil (loose rock) by continuous extraction of cores. Note: To be replaced by DIN EN ISO 22475-1 (2004-08). Beuth, Berlin.
DIN EN ISO 22475-1, (Draft standard), Publication date: 200408: Geotechnical investigation and testing — Sampling by drilling and excavation methods and groundwater measurements — Part 1: Technical principles for execution (ISO/DIS 224751:2004); German version prEN ISO 22475-1:2004. Beuth, Berlin.
DIN EN ISO 22475-1, (Draft standard), Publication date: 200408: Geotechnical investigation and testing — Sampling by drilling and excavation methods and groundwater measurements — Part 1: Technical principles for execution (ISO/DIS 224751:2004); German version prEN ISO 22475-1:2004. Beuth, Berlin.
Driscoll, F. G. (1986): Groundwater and Wells, 2nd edn., St. Paul, Minnesota: Johnson Filtration Systems Inc.
During, P.-H. (1983): Geologische Bohrungen, Bd. 1 Bohrtechnik und Technologie. Deutscher Verlag für Grundstoffindustrie, Leipzig.
Elson, B. & Shaw, R. (2005): Simple drilling methods. WEDC Loughborough University Leicestershire LEU 3TU UK. www.lboro.ac.uk/well/resources/technical-briefs/43-simpledrilling-methods.pdf
EPA (1990): Handbook of Suggested Practices for the Design and Installation of Ground-Water Monitoring Wells.
EPA (1997): Expedited Site Assessment Tools For Underground Storage Tank Sites: A Guide for Regulators. Office of Underground Storage Tanks (OUST). Also available online: www.epa.gov/OUST/pubs/sam.htm
EPA (2003): Field Analytic Technologies Encyclopedia. Office of Superfund Remediation and Technology Innovation (OSRTI). URL: http://fate.clu-in.org Last Updated: January 2003.
EPA Superfund (2005): Direct Push Technologies. www.epa.gov/superfund/programs/dfa/dirtech.htm
Fejes, I., Szabdvary, L. & Verä, L. (1997): Geophysikalische Penetrationssondierungen. In: Knädel, K., Krummel, H. & Lange, G.: Handbuch zur Erkundung des Untergrundes von Deponien und Altlasten, Band 3: Geophysik. Springer, Berlin.
Gore, P. J. W. (2003): http://gpc.edu/~pgore/geology/historical_lab/stratigraphy.php
Heitmann, R. (2000): Anwendung von elektrischen Drucksonden mit laserinduzierter Fluoreszenzmessung (MTF) und Membrane Interface-Probe (MIP) zur Untersuchung kontaminierter Standorte. FUGRO Consult GmbH, Markkleeberg.
Homrighausen, R. (1993): Bohrungen für die Erkundungen von Altlasten, Industriestandorten und Deponien, bbr, 44,10, 2–7.
IRTP (2001): International Reference Test Procedure (IRTP) for the Cone Penetration Test (CPT) and the Cone Penetration Test with pore pressure (CPTU). Report of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE).
ITVA (1996): Aufschlussverfahren zur Probengewinnung für die Untersuchung von Verdachtsflächen und Altlasten. Ingenieurtechnischer Verband Altlasten, Fachausschuss F2 “Probennahme” Arbeitshilfe.
Kram, M. L., Keller, A. A., Rossabi, J. & Everett, L. G. (2001): DNAPL Characterization Methods and Approaches, Part 1: Performance Comparisons. Ground Water Monitoring and Remediation. 21,4, 109–123.
Lapham, W. W., Wilde, F. D. & Koterba, M. T. (1995): Groundwater data-collection protocols and procedures for the National Water-Quality Assessment Program: Selection, installation, and documentation of wells, and collection of related data. USGS Open-File Report 95–398.
Lifewater Canada(2004): Drilling and Well Construction Manual. Lifewater Canada: http://www.lifewater.ca/ndexdril.htm
Luckner, L. & Schestakow, W. M. (1991): Migration processes in the soil and groundwater zone. Lewis, Boca Raton, Florida.
Lunne, T., Robertson, P. K. & Powell, J. J. M. (1997): Cone Penetration Testing in Geotechnical Practice. Blackie Academic & Professional. London. ISBN 0751-40393-8.
Meigh, A. C. (1989): Cone Penetration Testing, Methods and Interpretation. Butterworths, London.
OSU Trenching/Shoring Manual (2005): www.pp.okstate.edu/ehs/manuals/Trench.htm#soil
Sanglerat, G. (1972): The Penetrometer and Soil Exploration. Elsevier, Amsterdam.
Sara, M. N. (1993): Standard Handbook for Solid and Hazardous Waste Facility Assessments. Lewis, Boca Raton, Florida.
Sara, M. N. (2003): Site Assessment and Remediation Handbook. 2nd ed., Lewis, Boca Raton, Florida.
Scalf, M. R., McNabb, J. F., Dunlap, W. F., Cosby, R. L. & Fryberger, J. (1981): Manual of Groundwater Sampling Procedures. National Water Well Association, Worthington, Ohio.
Schmidt, J. (1993): Der Untergrund der Altlast “Eulenberg” bei Arnstadt — ein tektonisches Modell und Beiträge zur Umweltgeologie. Bergakademie Freiberg, Diplomarbeit.
Schmidt, J., Wunderlich, J. & Bähme, O. (2003): Fallbeispiel Eulenberg/Arnstadt-Geologie. In: Lange, G. & Knädel, K.: Handbuch zur Erkundung des Untergrundes von Deponien und Altlasten, Bd. 8, Erkundungspraxis. Springer, Berlin, 547–595.
Schreiner, M. & Kreysing, K. (Ed.) (1998): Handbuch zur Erkundung des Untergrundes von Deponien und Altlasten, Bd. 4: Geotechnik, Hydrogeologie (Manual for investigation of the subsoil of waste sites and hazardous sites, vol. 4: Geotechnics, Hydrogeology). Springer, Berlin.
Shuter, E. & Teasdale, W. E. (1989): Application of drilling, coring, and sampling techniques to test holes and wells. In: U.S. Geological Survey Techniques of Water-Resources Investigations, book 2, chap. F1.
Weiss, K. (1990): Baugrunduntersuchung im Feld. In: Smoltczyk, H. (Ed.): Grundbautaschenbuch, 1, Ernst, Berlin.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Knödel, K., Müller, K., Neuhaus, M., Jenn, F., Voigt, HJ. (2007). Methods for Characterizing the Geological Setting. In: Environmental Geology. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-74671-3_15
Download citation
DOI: https://doi.org/10.1007/978-3-540-74671-3_15
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-74669-0
Online ISBN: 978-3-540-74671-3
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)