Advertisement

HMI Principles for Lateral Safe Applications

  • Lars Danielsson
  • Henrik Lind
  • Evangelos Bekiaris
  • Maria Gemou
  • Angelos Amditis
  • Maurizio Miglietta
  • Per Stålberg
Part of the Lecture Notes in Computer Science book series (LNCS, volume 4555)

Abstract

LATERAL SAFE is a subproject of the PREVENT Integrated Project, co-funded by the European Commission under the 6th Framework Programme. LATERAL SAFE introduces a cluster of safety applications of the future vehicles, in order to prevent lateral/rear related accidents and assist the driver in adverse or low visibility conditions and blind spot areas. LATERAL SAFE applications include a lateral and rear monitoring system (LRM), a lane change assistant (LCA) and a lateral collision warning (LCW). An effective Human Machine Interface (HMI) is being developed, addressing each application, on the basis of the results emerged from mock-up tests realised in three sites (one in Greece and two in Sweden), aiming to determine which is the best HMI solution to be provided in each case. In the current paper, the final HMI principles, adopted and demonstrated for each application, are presented.

Keywords

HMI lateral safety rear monitoring evaluation 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Bank, D., Domenico, I., Miglietta, M., Oeschle, F.: Lateral Safe Applications, Deliverable 32.8, PReVENT project, LATERAL SAFE Subproject, C.N. 050131(2007)Google Scholar
  2. 2.
    Bekiaris, E., Gemou, M.: LS HMI(s) evaluation methodology. Technical Report: PReVENT project, LATERAL SAFE Subproject, C.N. 050131 (2004)Google Scholar
  3. 3.
    Blomqvist, P., Amditis, A., Floudas, N., Polychronopoulos, A., Bekiaris, E., Gaitanidou, E., Gemou, M., van den Broek, B., Benoist, K., Appenrodt, N., Bank, D., Herzog, H.-J., Lind, H., Denielsson, L., Miglietta, M.: Requirements and specifications. Deliverable 32.3: PReVENT project, LATERAL SAFE Subproject, C.N. 050131 (2005)Google Scholar
  4. 4.
    Fahey, S.E., Wierwille, W.W.: Advisory and alarm stimuli optimisation for a drowsy driver detection system. Technical Report: NHTSA, DOT HS 808 299 Semi-Annual Report, Research on Vehicle-Based Driver Status /Performance Monitoring: Seventh Semi-Annual Research Report, National Technical Information Service, Springfield (1995)Google Scholar
  5. 5.
    Janssen, W., Nilsoon, L.: Behavioral effects of driver support systems. In: Parkes, A.W., Franzen, S. (eds.) Driving future vehicles, pp. 147–155. Taylor & Francis, London (1993)Google Scholar
  6. 6.
    Jordan, A.D.: An introduction to usability. Taylor & Francis, London (1999)Google Scholar
  7. 7.
    Levin, D.T., Simon, D.J.: Failure to detect changes to attended objects in motion pictures. Psychonomic Bullentin and Review 4, 501–506 (1997)Google Scholar
  8. 8.
    Rumar, K.: The basic driver error: late detection. Ergonomics 33, 1281–1290 (1990)CrossRefGoogle Scholar
  9. 9.
    Sanders, M.S., McCormick, E.J.: Human factors in engineering and design, 7th edn. McGraw-Hill, New York (1992)Google Scholar
  10. 10.
    Van der Laan, J., Heino, A., de Waard, D.: A simple procedure for the assessment of acceptance of advanced transport telematics. Transportation Research, Part C 5, 1–10 (1997)CrossRefGoogle Scholar
  11. 11.
    Wickens, C.D., Sandry, D.L., Vidulich, M.: Compatibility and resource competition between modalities of input, central processing, and output. Human Factors 25, 227–248 (1983)Google Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2007

Authors and Affiliations

  • Lars Danielsson
    • 1
  • Henrik Lind
    • 1
  • Evangelos Bekiaris
    • 2
  • Maria Gemou
    • 2
  • Angelos Amditis
    • 3
  • Maurizio Miglietta
    • 4
  • Per Stålberg
    • 5
  1. 1.Volvo Car Corporation, Dept 94354, PV4A, S-405 08 GothenburgSweden
  2. 2.Centre for Research and Technology Hellas - Hellenic Institute of Transport (CERTH/HIT), L. Posidonos 17, 17455 AthensGreece
  3. 3.Institute of Communications and Computer Systems (ICCS) - National Technical, University of Athens (NTUA), Microwaves and Optics Lab, I-SENSE group, Iroon Politechniou str. 9, Polytechnic Campus, 15773 AthensGreece
  4. 4.Centro Ricerche Fiat (CRF) - Preventive Safety department, Strada Torino 50, 10043 Orbassano (TO)Italy
  5. 5.Volvo Technology (VTEC), Dept 6400, M1.6, 405 08 GöteborgSweden

Personalised recommendations