Abstract
Intermetallic compounds, especially those formed between light elements such as Ti and Al are attractive, because of their low density and good elevated temperature strength. However, the formation of intermetallic compounds also usually reduces the symmetry of the parent metal lattice. In turn, this places additional restrictions on the available deformation modes. These restrictions usually are manifested as increased strength, at least at elevated temperatures, reduced ductility and fracture toughness. Historically, the issues associated with reduced ductility and fracture toughness have been viewed as outweighing the benefits of increased strength. Consequently, the use of intermetallic compounds in structural applications has been very limited.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
McAndrew J. B., Kessler H. D.: Trans. AIME 206, (1956) p. 1348
Yamaguchi M., Umakoshi Y.: Progress in Materials Science 34, (1990) p. 1
Kim Y.-W., Dimiduk D. M.: J. of Metals 43, no. 8, (1991) p. 40
Yamaguchi M., Inui H.: Structural Intermetallics, TMS, Warrendale, USA, (1993) p. 127
Huang S. C. Chesnutt J. C.: Intermetallic Compounds: Principles and Practice, Vol. 2, John Wiley and Sons, New York, USA, (1995) p. 73
Dimiduk D. M.: Gamma Titanium Aluminides, TMS, Warrendale, USA, (1995) p. 3
Dimiduk D. M., Martin P. L., Kim Y.-W.: Mat. Sci. Eng. A243, (1998) p. 66
Appel F., Wagner R.: Mat. Sci. Eng. R22, (1998) p. 187
Dimiduk D. M.: Intermetallics 6, (1998) p. 613
Dimiduk D. M.: Mat. Sci. Eng. A263, (1999) p. 281
Dimiduk D. M., McQuay P. A., Kim Y.-W.: Titanium ’99: Science and Technology, CRISM “Prometey”, St. Petersburg, Russia, (2000) p. 259
Kim Y.-W., Dimiduk D. M., Loretto M., eds.: Gamma Titanium Aluminides, TMS, Warrendale, USA, (1999)
Kim Y.-W., Wagner R., Yamaguchi M., eds.: Gamma Titanium Aluminides, TMS, Warrendale, USA, (1995)
Hemker K. J., Dimiduk D. M., Clemens H., Darolia R., Inui H., Larsen J. M., Sikka V. K., Thomas M., Whittenberger J. D., eds.: Structural Intermetallics 2001, TMS, Warrendale, USA, (2001)
Lipsitt H. A.: High Temperature Ordered Intermetallic Alloys V, Mat. Res. Soc. Symp. Proc. 288, (1993) p. 119
Banerjee D., Gogia A. K., Nandy T. K., Muraleedharan K., Mishra R. S.: Structural Intermetallics, TMS, Warrendale, USA, (1993) p. 19
Banerjee D.: Intermetallic Compounds: Principles and Practice, Vol. 2, John Wiley and Sons, New York, USA, (1995) p. 91
Banerjee D.: Progress in Materials Science 42, (1997) p. 135
Nandy T. K., Banerjee D.: Structural Intermetallics, TMS, Warrendale, USA, (1997) p. 777
Gogia A. K., Nandy T. K., Banerjee D., Carisey T., Strudel J. L., Franchet J. M.: Intermetallics 6, (1998) p. 741
Marcinkowski M. J.: Electron Microscopy and Structure of Materials, University of California Press, Berkeley, USA, (1972) p. 333
Blackburn M. J.: Trans. AIME 239, (1967) p. 660
Shechtman D., Blackburn M. J., Lipsitt H.: Met. Trans. 5, (1974) p. 1373
Banerjee D., Rowe R. G., Hall E. L.: High-Temperature Ordered Intermetallic Alloys IV, MRS, Pittsburgh, USA, (1991) p. 285
Ward C. H.: Intern. Mat. Rev. 38, (1993) p. 79
Ward C. H., Williams J. C., Thompson A. W., Rosenthal D. G., Froes F. H.: Sixth World Conference on Titanium, Les Editions de Physique, Les Ulis, France, (1988) p. 1103
Chesnutt J. C., Hall J. A., Lipsitt H. A.: Titanium ’95, Science and Technology, The University Press, Cambridge, UK, (1996) p. 70
Strychor R., Williams J. C.: Solid to Solid Phase Transformations, AIME, Warrendale, USA, (1982) p. 249
Strychor R., Williams J. C., Soffa W. A.: Met. Trans. 19A, (1988) p. 225
Lütjering G., Proske G., Albrecht J., Helm D., Däubler M.: Intermetallic Compounds (JIMIS-6),The Japan Institute of Metals, Sendai, Japan, (1991) p. 537
Kumpfert J., Ward C. H., Peters M., Kaysser W. A.: Synthesis/Processing of Lightweight Metallic Materials, TMS, Warrendale, USA, (1995) p. 85
Banerjee D., Gogia A. K., Nandy T. K., Joshi V. A.: Acta Met. 36, (1988) p. 871
Rowe R. G., Banerjee D., Muraleedharan K., Larsen M., Hall E. L., Konitzer D. G., Woodfield A. P.: Titanium ’92, Science and Technology, TMS, Warrendale, USA, (1993) p. 1259
Kelly T. J., Austin C. M.: Titanium ’95, Science and Technology, The University Press, Cambridge, UK, (1996) p. 192
Blackburn M. J.: The Science, Technology and Application of Titanium, Pergamon Press, Oxford, UK, (1970) p. 633
Seeger J., Hartig C., Bartels A., Mecking H.: High-Temperature Ordered Intermetallic Alloys IV, MRS, Pittsburgh, USA,(1991) p. 157
Bhowal P. R., Merrick H. F., Larsen D. E.: Mater. Sci. Eng. A192/193, (1995) p. 685
Huang S. C., McKee D. W., Shih D. S., Chesnutt J. C.: Intermetallic Compounds (JIMIS6),The Japan Institute of Metals, Sendai, Japan, (1991) p. 363
Proske G., Lütjering G., Albrecht J., Däubler M. A., Helm D.: Titanium ‘92, Science and Technology, TMS, Warrendale, USA, (1993) p. 1187
Rowe R. G.: Titanium ’92, Science and Technology, TMS, Warrendale, USA, (1993) p. 343
Rowe R. G., Konitzer D. G., Woodfield A. P., Chesnutt J. C.: High-Temperature Ordered Intermetallic Alloys IV, MRS, Pittsburgh, USA, (1991) p. 703
Proske G., Lütjering G., Albrecht J., Helm D., Däubler M.: Mater. Sci. Eng. A152, (1992) p. 310
Lütjering G., Proske G., Terlinde G., Fischer G., Helm D.: Titanium ’95, Science and Technology, The University Press, Cambridge, UK, (1996) p. 332
Takashima K., Cope M. T., Bowen P.: Titanium ’95, Science and Technology, The University Press, Cambridge, UK, (1996) p. 340
Kim Y.-W., Boyer R., eds.: Microstructure/Property Relationships in Titanium Aluminides and Alloys, TMS, Warrendale, USA, (1990)
Pope D. P., Liu C. T., Whang S. H., Yamaguchi M., eds.: High Temperature Intermetallics, Elsevier, Amsterdam, The Netherlands, (1997)
Clemens H., Kestler H.: Advanced Engineering Materials 2, (2000) p. 551
Liu C. T., Maziasz P. J., Clemens D. R., Schneibel J. H., Sikka V. J., Nieh T. G., Wright J., Walku L. R.: Gamma Titanium Aluminides, TMS, Warrendale, USA, (1995) p. 679
Larsen J. M., Worth B. D., Balsone S. J., Jones J. W.: Gamma Titanium Aluminides, TMS, Warrendale, USA, (1995) p. 821
Huang S. C.: US Patent 4 879 092, (1989)
Austin C., Kelly T.: Structural Intermetallics 1993, TMS, Warrendale, USA, (1993) p. 149
Austin C., Kelly T., McAllister K., Chesnutt J.: Structural Intermetallics 1997, TMS, Warrendale, USA, (1997) p. 413
Rights and permissions
Copyright information
© 2007 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
(2007). Titanium Based Intermetallics. In: Titanium. Engineering Materials, Processes. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-73036-1_8
Download citation
DOI: https://doi.org/10.1007/978-3-540-73036-1_8
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-71397-5
Online ISBN: 978-3-540-73036-1
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)