Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literaturverzeichnis
Antoni, C. H.: (Hrsg.) Gruppenarbeit in Unternehmen. Weinheim: Psychologie Verlags Union, 1994
Apple Computer Inc. Macintosh Human Interface Guidelines. Addison-Wesley, Reading, MA, 1992.
William Barnett, Adrien Presley, Mary Johnson, D.H. Liles: „An Architecture for the Virtual Enterprise“. Proceedings of the IEEE International Conference on Systems, Man and Cybernetics, Vol. 1, 1994: S. 506–511.
Brennan, D. UIL: File format, data types, functions. In
Brödner, P.: Fabrik 2000. Alternative Entwicklungspfade in die Zukunft der Fabrik. Berlin: Ed. Sigma Bohn, 1985
Bürgel, H.D.: Lean R&D, in: Zahn, E.: Handbuch Technologiemanagement, Schäffer-Poeschl Verlag, 1995.
Christoph Bußler, Stefan Jablonski: „An Approach to Integrate Workflow Modeling and Organization Modeling in an Enterprise“. IEEE Third Workshop on Enabling Technologies: Infrastructure for Collaborative Enterprises (WETICE), Morgantown, WV, USA, April 1994.
Irene Greif (Hrsg.) “Computer Supported Cooperative Work: A Book of Readings”, Morgan-Kaufmann Publishers, San Mateo, CA, 1988. MfG, Bernd
DIN 66234. Teil 8: Bildschirmarbeitsplätze — Grundsätze der ergonomischen Dialoggestaltung. Beuth-Verlag, Berlin, 1998.
Ebert, G., et al.: Aktuelle Aufgaben des FuE-Controlling in Industrieunternehmen, in: Gemünden H.G., Pleschak, F.: Innovationsmanagement und Wettbewerbsfähigkeit, Gabler-Verlag, Wiesbaden, 1992.
Ehrlenspiel, K.: Konstruktionslehre I. Skriptum zur Vorleseung an der TU München, 1994
Ehrlenspiel, K.: Integrierte Produktentwicklung. Carl Hanser Verlag München Wien, 1995
Eversheim W.: Prozeßorientierte Unternehmensorganisation: Konzepte und Methoden zur Gestaltung “schlanker” Organisationen. Berlin, Heidelberg, u. a.: Springer, 1995
P.M. Fergusson, editor, Motif Reference Manual, S. 755-824, O’Reilly & Associates, Inc., 1993.
S.L. Fowler und V.R. Stanwick. The GUI Style Guide. AP Professional, 1995.
J. Galler, A.-W. Scheer: „Workflow-Management: Die ARIS-Architektur als Basis eines multimedialen Workflow-Systems“. Scheer, A.-W. (Hrsg.): Veröffentlichungen des Instituts für Wirtschaftsinformatik, Heft 108, Saarbrücken 1994.
Gesellschaft für Informatik. Gestaltungsempfehlungen für Benutzungsoberflächen von CAD-Systemen. GI, Bonn, 1996.
Golm, F.: Gestaltung von Entscheidungsstrukturen zur Optimierung von Produktentwicklungsprozessen, Dissertation TU Berlin 1996, Reihe: Berichte aus dem Produktionstechnischen Zentrum Berlin, FhG/IPK-Berlin, UNZE Verlag, Potsdam, 1996.
Grabowski, H. (Hrsg.): Sonderforschungsbereich 346: Rechnerintegrierte Konstruktion und Fertigung von Bauteilen. Integriertes Produkt / Produktionsmodell, Version 3.1. Universität Fridericiana Karlsruhe (TH) Dezember 1995.
Grabowski, H.; Anderl, R.; Polly, A.: Integriertes Produktmodell. Beuth Verlag, Berlin Wien Zürich 1993
Grabowski, H., Gebauer, M., Langlotz, G.: Umsetzung der Konstruktionsmethodik in CAD-System-Funktionen, Tagungsband Konstrukteurstagung, Rostock, September 1996
Grabowski, H.; Gebauer, M.; Rzehorz, C.: Wissensbasierte Anforderungsmodellierung zur Erfüllung von Umweltanforderungen, In: Demontagefabriken zur Rückgewinnung von Ressourcen in Produkt-und Materialkreisläufen Sonderforschungsbereich 281, (Kolloquium zur Kreislaufwirtschaft und Demontage, 30.-31. Januar 1997 Berlin), Hrsg.: TU und HdK Berlin S. 374-378
Groth, A.: CAD und EDM in optimierten Prozeßketten. In: Proceedings der 4. CAD, Chemnitz 1994
Harrison, Timothy, H; Schmidt, Douglas, C.: Evaluating thePerformance of OO Network Programming Toolkits, C++Report, SIGS, Vol. 8, No. 7, July/August, 1996
Hayka, H.; Morche, I.: Integrated Electromechanical Design, topics 6/96, Vol. 8, 1996, 22–23.
IEC 1360-1: Genormte Datenelementtypen mit Klassifikationsschema für elektrische Bauteile, Teil 1: Definitionen — Regeln und Methoden. Berlin: Beuth Verlag, 1994
ISO 9241-nn. Ergonomic requirements for office work with display terminals (VDTs). Beuth-Verlag, Berlin, 1995.
ISO 10303-1: Industrial automation and systems integration — Product data representation and exchange: Part1: Overview and fundamentals principles, International Organization for Standardization, Geneve, 1994.
ISO 10303-11: Industrial automation and systems integration — Product data representation and exchange: Part 11: The EXPRESS Language Referenz Manual, International Organization for Standardization, Geneve, 1992.
ISO 10303-11: Industrial automation and systems integration — Product data representation and exchange: Part 22: Implementation methods; Standard data access interface specification, International Organization for Standardization, Geneve, 1993.
S. Jablonski: „Workflow-Management-Systeme: Motivation, Modellierung, Architektur“. Informatik Spektrum, Band 18, Heft 1, Februar 1995: S. 13–24.
Adidev Jain, Kevin Fliess: „Information Technology as Enabler for Unification of Process Flows with Concurrent Engineering“. IFIP 5.10 Workshop on Virtual Prototyping, Providence, Rhode Island, USA, 21.–23. September 1994.
Jasnoch, Uwe: Eine offene, verteilte CAD-System Umgebung zur Unterstützung von Concurrent Engineering, Fraunhofer IRB Verlag, 1997.
Kindl, Thomas: Dienstvermittlung in objektorientierten CAD-Systemen, Diplomarbeit an der TH Darmstadt, 1997
Kläger, R. K.: Modellierung von Produktanforderungen als Basis für Pro-blemlösungsprozesse in intelligenten Konstruktionssystemen, Dissertation am Institut für Rechneranwendung in Planung und Konstruktion, Verlag Shaker, Aachen, 1993
Klose, J.; Steger, W.: Interfaces zwischen CAD-Systemen und Berechnungssoftware für Maschinenelemente. In: VDI-Berichte 993.1, Düsseldorf: VDI-Verlag 1992
Koller, R.: Konstruktionslehre für den Maschinenbau. Berlin: Springer Verlag, 1985
Krause, F.-L.: Produktgestaltung, in: Betriebshütte, 30. Auflage, Springer-Verlag, Berlin Heidelberg, 1996.
Lothar Leger: „Katalysator und Initiator für prozeßorientierte Organisation“. Computerwoche, 22. Jahrgang, Nr. 37, 15. September 1995: S. 37–38.
Meerkamm, H.: Integrierte Produktentwicklung im Spannungsfeld von Kosten-, Zeit-und Qualitätsmanagement, in: VDI-Jahrbuch 95, VDI-Verlag, Düsseldorf, 1995.
Meerkamm, H.; Kasan, R.-D.; Sander, S.; Storath, E.: Die digitale Bereitstellung von Konstruktionswissen auf der Basis von standardisierten Produktmodellen. International Conference on RPD — Rapid Product Development. Stuttgart 1996.
N.N., Metaphase 2.3 CORBA Gateway, Product Information, Januray 1997
Microsoft Corporation. The Windows Interface: An application design guide. Microsoft Press, Redmond, WA, 1992.
Milberg, J.: Effizienz-und Qualitätssteigerung bei der Produkt-und Produktionsgestaltung, in: Spur, G. (Hrsg.) Proc. PTK’92 „Markt, Arbeit und Fabrik“, Berlin, 1992, 59-66.
MODeL Reference. Edition C. Arden Hills: Metaphase Technology Inc., 1996
Müller, J.; Praß, P.; Beitz, W.: Modelle beim Konstruieren. In: Konstruktion 44 (1992), S. 319–324. Berlin: Springer Verlag
Müller-Jones, K.; Merz, M.; Lamersdorf, W.: Agents, services and electronic markets: how do they integrate?, hr. Distributed Platforms, S. 287-300, Schill, Mittasch, Spaniol, Popien (Hrsg.), Proceedings of the IFIP/IEEE International Conference on Distributed Platforms, Chapman&Hall, 1996
Ochs, B.: Neue Ansätze für die Verwirklichung von Simultaneous Engineering, in: Krause, F.-L. (Hrsg.) Proc. IMT-Seminar „Verkürzung von Produktentwicklungszeiten“, Berlin, 1992.
Object Management Group: The Common Object Request Broker: Architecture and Specification (Revision 2.0). Framingham MA, July 1995.
Object Management Group: Common Object Services Specifications, volume 1. Framingham MA, March 1995.
Object Management Group: Common Facilities Specifications (Revision 4.0). Framingham MA, Jan. 1995
Open Software Foundation. OSF/Motif Style Guide, Rev. 1.2. Prentice Hall, Englewood Cliffs, NJ, 1993.
Pahl, G., Beitz, W.: Konstruktions lehre — Methoden und Anwendung. Berlin: Springer-Verlag, 1993.
Pahl, G., Beitz, W.: Konstruktionslehre — Methoden und Anwendung. Berlin: Springer-Verlag, 1997.
Industrial Automation Systems and Integration Parts Library — ISO 13584. 1995
Polly, A.: Methodische Entwicklung und Integration von Produktmodellen, Dissertation am Institut für Rechneranwendung in Planung und Konstruktion, Band 4, Verlag Shaker, Aachen, 1996
Popien, Claudia: Dienstvermittlung in verteilten Systemen, Verlag B. G. Teubner, Stuttgart, 1995
Redlich, Jens-Peter: CORBA 2.0 — Praktische Einführung für C++ und Java, Addison-Wesley, 1996
Rix, J.; Kress, H.; Schroeder, K.: Das virtuelle Produkt — neue Präsentationsund Interaktionstechniken in der Produktentwicklung, VDI-Tagung Simulation in der Praxis — neue Produkte effizienter entwickeln, Fulda, Germany, October 11-12, 1995, VDI-Berichte Nr. 1215, pp. 313-324, VDI-Verlag, 1995.
Rodenacker, W.G.: Methodisches Konstruieren. Konstruktionsbücher Bd. 27. Berlin: Springer Verlag, 1991
Roth, K.: Konstruieren mit Konstruktionskatalogen. Berlin: Springer-Verlag, 1982
Roth, K.: Übertragung von Konstruktionsintelligenz an den Rechner. VDI-Berichte 700.1. Düsseldorf: VDI-Verlag, 1988
Roth, Karlheinz: Konstruieren mit Konstruktionskatalogen; Band 1 Konstruktionslehre; 2. Auflage; Springer Verlag Berlin, Heidelberg, New York, London, Paris, Tokyo, Hong Kong, Barcelona, Budapest, 1994
Schacher, D.: Kommunikations-, Qualitäts-und Personalmanagement für Simultaneous Engineering, in: Vortragsband zum Produktionstechnischen Kolloquium PTK92, Berlin, 1992.
Schmelzer, H.J.: Steigerung der Effektivität und Effizienz durch Verkürzung von Entwicklungszeiten, in: Reichwald, R., Schmelzer, H.J.: Durchlaufzeiten in der Entwicklung, Oldenbourg-Verlag, München, Wien, 1990.
Hans Schuster, Stefan Jablonski, Thomas Kirsche, Christoph Bußler: „A Client/Server Architecture for Distributed Workflow Management Systems“. Technischer Report IMMD VI, Universität Erlangen, März 1994.
N.N., “Preliminary Product Information”,SDRC, Milford, Ohio, June 1996
Sendler, U.: CAD & Office Integration: OLE for Design and Modeling — a new technology for CA-software, Springer 1996
Spur, G.: Fabrikbetrieb, Carl Hanser Verlag, München, Wien, 1994.
Spur, G.: Die Genauigkeit von Maschinen, Carl Hanser Verlag, München, Wien, 1996.
Spur, G., Krause, F.-L.: CAD-Technik: Lehr-und Arbeitsbuch für die Rechnerunterstützung und Arbeitsplanung. Hanser, München 1984.
Spur, G.; Krause, F.-L.: Das virtuelle Produkt — Management der CAD-Technik, Carl Hanser Verlag, München, Wien, 1997.
Storath, Elmar: Kontextsensitive Wissensbereitstellung in der Konstruktion. Dissertation — Universität Erlangen-Nürnberg 1997.
VDI-Richtlinie 2221: Methodik zum Entwickeln und Konstruieren technischer Systeme und Produkte. Düsseldorf: VDI-Verlag GmbH, 1986
Jari Veijalainen, Aarno Lehtola, Olli Pihlajamaa: „Research Issues in Workflow Systems“. 8th ERCIM Database Research Group Workshop on Database Issues and Infrastructure in Cooperative Information Systems, Trondheim, Norwegen, August 1995.
F. Vernadat: „CIMOSA: Enterprise Modelling and Enterprise Integration Using a Process-Based Approach“. IFIP Transactions B (Applications in Technology) (Netherlands), Vol. B-14, 1993: S. 65–79.
Gerhard Versteegen: „Alles im Fluß: Die Ansätze der Workflow Management Coalition“. iX, Nr. 3, März 1995: S. 152–160.
Weule, H.: Die Bedeutung der Produktentwicklung für den Industriestandort Deutschland, Sonderdruck zur VDI-Tagung „Informationsverarbeitung in der Konstruktion’ 96“, München, 22.-23.10.1996.
Wiendahl, H.-P.: Betriebsorganisation für Ingenieure, 4. Auflage, Carl Hanser Verlag, München, Wien, 1996.
Workflow Management Coalition: „Glossary: A Workflow Management Coalition Specification“. November 1994.
Aidong Zhang: „Impact of Multimedia Data on Workflows“. CSCW-94 Workshop on Distributed Systems, Multimedia, and Infrastructure Support in CSCW.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1997 B. G. Teubner Stuttgart
About this chapter
Cite this chapter
Abeln, O. (1997). Veröffentlichungen / Literaturverzeichnis. In: Abeln, O. (eds) Innovationspotentiale in der Produktentwicklung. Vieweg+Teubner Verlag. https://doi.org/10.1007/978-3-322-87195-4_9
Download citation
DOI: https://doi.org/10.1007/978-3-322-87195-4_9
Publisher Name: Vieweg+Teubner Verlag
Print ISBN: 978-3-519-06376-6
Online ISBN: 978-3-322-87195-4
eBook Packages: Springer Book Archive