Abstract
In the article, the legal risk of the researcher in the case of a scientific experiment in the machining of magnesium alloys was determined. The use of magnesium alloys in industry and identification of the problems associated with machining were presented. The issues concerning legal liability in the experiment and provisions ensuring a greater scope of legal protection for the researcher were indicated and challenges in the machining of magnesium alloys were analyzed. Moreover, the method to assess legal risk in experiments was proposed and its application in the experiments was presented. The analysis confirmed the applicability of the proposed method to the analysis of the legal risk.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kainer, K.U. (ed.): Magnesium Alloys and Their Applications. Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim (2000)
Ostrovsky, L., Henn, Y.: Present state and future of magnesium application in aerospace industry. In: International Conference “New Challenges Aeronautics”. In: ASTEC 2007, pp. 1–5 (2007)
Czerwinski, F.: Controlling the ignition and flammability of magnesium for aerospace applications. Corros. Sci. 86, 1–16 (2014)
Mozgawa, M. (ed.): Criminal law. The general part (In Polish: Prawo karne. Część ogólna), Warszawa (2009)
Kubiak, R.: Justification of the allowed experiment in the light of collision theory of goods and social profitability (In Polish: Kontratyp dozwolonego eksperymentu w świetle teorii kolizji dóbr i opłacalności społecznej), Państwo i Prawo (2005)
Gałuszka, A.: The risk of innovation in the new penal code (In Polish: Ryzyko nowatorstwa w nowym kodeksie karnym), Prokur. i Prawo, no. 2 (1998)
Sadgrove, K.: The Complete Guide to Business Risk Management. Routledge, London (2016)
Zagórski, I., Kuczmaszewski, J.: Efektywność i bezpieczeństwo frezowania stopów magnezu Effectiveness and safety during milling magnesium alloys. Politechnika Lubelska, Lublin (2017)
BG-Regel: BGR 204 Umgang mit Magnesium (2005)
Friemuth, T., Winkler, J.: Machining of magnesium workpieces. Adv. Eng. Mater. 1, 183–186 (1999)
Carou, D., Rubio, E.M., Lauro, C.H., Davim, J.P.: Experimental investigation on finish intermittent turning of UNS M11917 magnesium alloy under dry machining. Int. J. Adv. Manuf. Technol. 75, 1417–1429 (2014)
Hou, J.Z., Zhou, W., Zhao, N.: Methods for prevention of ignition during machining of magnesium alloys. Key Eng. Mater. 447–448, 150–154 (2010)
Kuczmaszewski, J., Zagórski, I., Dziubinska, A.: Investigation of ignition temperature, time to ignition and chip morphology after the high-speed dry milling of magnesium alloys. Aircr. Eng. Aerosp. Technol. 88, 389–396 (2016)
Zagórski, I., Kuczmaszewski, J.: Study of chip ignition and chip morphology after milling of magnesium alloys. Adv. Sci. Technol. Res. J. 10, 101–108 (2016)
Khan, F.I., Abassi, S.A.: TOPHAZOP: a knowledge-based software tool for conducting HAZOP in a rapid, efficient yet inexpensive manner. J. Loss Prev. Process Ind. 10(5–6), 333–343 (1997)
Venkatasubramanian, V., et al.: Intelligent systems for HAZOP analysis of complex process plants. Comput. Chem. Eng. 24, 2291–2302 (2000)
Brereton, S., McLouth, L., Odell, B., Singh, M., Tobin, M., Trent, M., Yatabe, J.: Overview of the preliminary safety analysis of the national ignition facilitiy. J. Fusion Energy 16(1/2), 85–94 (1997)
Hammer, W., Price, D.: Occupational Safety Management and Engineering, 5th edn. Prentice Hall, New Jersey (2001)
Sevcik, F.: Current and future concepts in FMEA. In: Proceedings – Annual Reliability and Maintainability Symposium, Philadelphia, PA, USA, pp. 414–421 (1981)
Kjellen, U.: Prevention of Accidents through Experience Feedback. CRC Press, London and New York (2000)
Aven, T.: Foundations of Risk Analysis. Wiley, Chichester (2003)
Cooper, D.F., Grey, S., Raymond, G., Walker, P.: Project Risk Management Guidelines: Managing Risk in Large Projects and Complex Procurements. Wiley, Chichester (2004)
Lawley, H.G.: Operability studies and hazard analysis. Chem. Eng. Prog. Am. Inst. Chem. Eng. 4, 45–56 (1974)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Habrat, D., Stadnicka, D., Habrat, W. (2019). Analysis of the Legal Risk in the Scientific Experiment of the Machining of Magnesium Alloys. In: Hloch, S., Klichová, D., Krolczyk, G., Chattopadhyaya, S., Ruppenthalová, L. (eds) Advances in Manufacturing Engineering and Materials. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-99353-9_45
Download citation
DOI: https://doi.org/10.1007/978-3-319-99353-9_45
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-99352-2
Online ISBN: 978-3-319-99353-9
eBook Packages: EngineeringEngineering (R0)