Abstract
To protect vibration of structures, vibration modal analysis is important. Conventional experimental vibration analysis method uses accelerometers or laser displacement meters. The analysis takes much time and troublesome work. Especially, by contacting accelerometers to objects the results of frequency mode have some errors because of contact of the accelerometer weight. The authors have previously proposed a new method for shape measurement, i.e. the one-pitch phase analysis (OPPA) method using moiré topography. In moiré topography, the number of pixels for one pitch is constant regardless of the object height. The OPPA method analyzes the phase of each pixel in a single-shot image by using brightness data from one pitch of a projected grating. A motion capture system has been previously developed using OPPA method and measured the 3D coordinates at every pixel of the surface of a human body. In this study, the OPPA method is applied to vibration modal analysis of a cantilever plate using a high-speed camera. This method is useful for inspection of automobiles, machines, buildings, etc. without contact, in a short time.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Morimoto, Y., Masaya, A., Ueki, M.: High-speed 3D shape measurement by one pitch phase analysis method using brightness values in small square area of one-shot image. Opt. Lasers Eng. (2018) (submitted)
Bruning, J.H., Herriott, D.R., Gallagher, J.E., Rosenfeld, D.P., White, A.D., Brangaccio, D.J.: Digital wave front measuring interferometer for testing optical surface and lenses. Appl. Opt. 13(11), 2693–2703 (1974)
Takeda, M., Mutoh, K.: Fourier transform profilometry for the automatic measurement of 3-D object shapes. Appl. Opt. 22(24), 3977–3982 (1983)
Huang, L., Kemao, Q., Pan, B., Asundi, A.K.: Comparison of Fourier transform, windowed Fourier transform, and wavelet transform methods for phase extraction from a single fringe pattern in fringe projection profilometry. Opt. Lasers Eng. 48(2), 141–148 (2010)
Ri, S., Fujigaki, M., Morimoto, Y.: Sampling Moiré method for accurate small deformation distribution measurement. Exp. Mech. 50(4), 501–508 (2010)
Gu, R., Yoshizawa, T.: Talbot projected 3-D profilometry by means of one step phase-shift algorithms. In: Proceedings of SPIE 1720, International Symposium on Optical Fabrication, Testing, and Surface Evaluation (1992). https://doi.org/10.1117/12.132157
Arai, Y., Kurata, T.: High-speed Moiré topography with high precision using a technique with a fringe scanning interferometer. Jpn. J. Opt. 15(5), 402–406 (1986). in Japanese
Morimoto, Y., Kusunoki, Y., Ueki, M., Masaya, A., Takagi, A.: One-pitch phase analysis method for grating and its application to shape analysis of vibrating object. In: International Conference on Computational & Experimental Engineering and Sciences (ICCES’15), 2015
Morimoto, Y., Kusunoki, Y., Ueki, M., Takagi, A., Masaya, A.: Dynamic deformation measurement by one-pitch phase analysis (OPPA) method. In: 11th ISEM’16-Ho Chi Minh, Vietnam, 2-4 November 2016
Morimoto, Y., Fujigaki, M., Toda, H.: Real-time shape measurement by integrated phase-shifting method. In: Proceedings of SPIE. vol. 374, pp. 118–125 (1999)
Zhang, S.: Recent progresses on real-time 3D shape measurement using digital fringe projection techniques. Opt. Lasers Eng. 48(2), 149–158 (2010)
Wang, Z.Z., Yang, Y.M.: Single-shot three-dimensional reconstruction based on structured light line pattern. Opt. Lasers Eng. 106, 10–16 (2018)
Fujigaki, M.: Real-time and wide-range 3D shape measurement using linear LED fringe projector. In: 2nd International Conference on Opto-Electronics and Applied Optics (IEM OPTRONIX), vol. 015, pp. 1–5 (2015). https://doi.org/10.1109/OPTRONIX.2015.7345513
Acknowledgements
The work in this paper was supported by many members of 4D Sensor Inc. The author appreciates Dr. A. Masaya, Mr. Y. Irino, Mr. Q. Quarles, Mr. A. Horn, Mr. I. Harker and, Mr. S. Seles and to their contributions, and Prof. H. Koike of Okayama University to his advice.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Morimoto, Y., Takagi, A., Ueki, M., Pirsig, L. (2019). Vibration Modal Analysis by High-Speed and Accurate Shape Measurement Using One-Pitch Phase Analysis Method. In: Lamberti, L., Lin, MT., Furlong, C., Sciammarella, C., Reu, P., Sutton, M. (eds) Advancement of Optical Methods & Digital Image Correlation in Experimental Mechanics, Volume 3. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-319-97481-1_14
Download citation
DOI: https://doi.org/10.1007/978-3-319-97481-1_14
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-97480-4
Online ISBN: 978-3-319-97481-1
eBook Packages: EngineeringEngineering (R0)