Abstract
The optimization of controller parameters or gains is a challenge usually approached using empirical methods that consume valuable time, without the certainty that the obtained gains actually produce the desired behaviour of the controlled plant. There are several analytical and numerical methodologies to find the parameters for PID controllers, however currently there is not enough available information regarding the application of optimization methods for nonlinear controllers. The present work describes the application of the maximum descent method to find the gains of IDA-PBC controller for a ball and beam system. The proposed methodology involves implementing a mathematical model to describe the system’s dynamics, the design of a objective function to measure how closely the plant follows the desired behaviour, and finally the evaluation of a set of gains obtained by the numerical method. The dynamic model and the optimization algorithm were implemented in C language in order to reduce the computer time compared to the use of frameworks such as MATLAB. Numerical simulations to validate the effectiveness of the proposed methodology are included.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Khalil, H.K.: Nonlinear Systems, 3rd edn. Prentice Hall, Harlow (2002)
Zúñiga, J.: Control de un Robot SCARA Basado en Pasividad. Maestría en ciencias en ingeniería electrónica, Centro Nacional de Investigación y Desarrollo Tecnológico, Cuernavaca, Morelos, México (2016)
García, D., Sandoval, J., Gutiérrez-Jagüey, J., Bugarin, E.: Control IDA-PBC de un Vehículo Submarino Subactuado. Revista Iberoamericana de Automática e Informática industrial 15, 36 (2017)
González-Cabezas, H.A., Duarte-Mermoud, M.A.: Control de velocidad para motores de inducción usando IDA-PBC. Revista Chilena de Ingeniería 446, 81–90 (2005)
Ortega, R., Spong, M.W., Gómez-Estern, F., Blankenstein, G.: Stabilization of a class of underactuated mechanical systems via interconnection and damping assignment. IEEE Trans. Autom. Control 47(8), 1218–1233 (2002)
Acosta, J.Á., Ortega, R., Astolfi, A., Mahindrakar, A.D.: Interconnection and damping assignment passivity-based control of mechanical systems with underactuation degree one. IEEE Trans. Autom. Control 50(12), 1936–1955 (2005)
Gómez-Estern, F., Van der Schaft, A.: Physical damping in IDA-PBC controlled underactuated mechanical systems. Eur. J. Control 10(5), 451–468 (2004)
De-León-Gómez, V., Santibañez, V., Sandoval, J.: Interconnection and damping assignment passivity-based control for a compass-like biped robot. Int. J. Adv. Rob. Syst. 14(4), 1–18 (2017). https://doi.org/10.1177/1729881417716593
Wang, W.: Control of a ball and beam system. Ph.D. thesis (2007)
López, F., Monroy, P., Rairán, J.D.: Control de posición de un sistema bola y viga con actuadores magnéticos. Tecnura 15, 12–23 (2011)
Ortiz, E., Liu, W.Y.: Modelado y control PD-Difuso en tiempo real para el sistema barra-esfera. In: Congreso anual de la AMCA, pp. 1–6 (2004)
Meneses Morales, P., Zafra Siancas, H. D.: Diseño e implementación de un módulo educativo para el control de sistema Bola y Varilla. PhD thesis, Pontificia Universidad Católica del Perú (2013)
Muralidharan, V., Anantharaman, S., Mahindrakar, A.D.: Asymptotic stabilisation of the ball and beam system: design of energy-based control law and experimental results. Int. J. Control 83(6), 1193–1198 (2010)
Higuera, C., Chargoy, A., Sandoval, J., Bugarin, E., Coria, L.N.: IDA-PBC en Voltaje para la Regulación de un Sistema Barra-Bola Experimental. In: Congreso Nacional de Control Automático, Monterrey, Nuevo León, Mexico, pp. 1–6 (2017)
Morales Viscaya, J.A., Rochín Ramírez, A., Castro Liera, M.A., Sandoval Galarza, J.A.: AG y PSO como métodos de sintonía de un PID para el control de velocidad de un motor CD. In: Castro Liera, I., Cortés Larrinaga, M. (eds.) Nuevos avances en robótica y computación, 1st edn. pp. 81–87. ITLP, La Paz (2015)
Wu, H., Su, W., Liu, Z.: PID controllers: design and tuning methods. In: Proceedings of the 2014 9th IEEE Conference on Industrial Electronics and Applications, ICIEA 2014 (2014)
Ogata, K.: Modern Control Engineering, 5th edn. Pearson, New York (2016)
Schultz, W.C., Rideout, V.C.: Control system performance measures: past, present, and future. IRE Trans. Autom. Control AC–6, 22–35 (1961)
Nocedal, J., Wright, S.J.: Numerical Optimization, 2nd edn. Springer, New York (2006)
Nieves Hurtado, A., Domínguez Sánchez, F.C.: Métodos numéricos: aplicados a la ingeniería. 4th edn. Grupo Editorial Patria (2012)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer International Publishing AG, part of Springer Nature
About this paper
Cite this paper
Morales, J.A., Castro, M.A., Garcia, D., Higuera, C., Sandoval, J. (2019). IDA-PBC Controller Tuning Using Steepest Descent. In: Trujillo, L., Schütze, O., Maldonado, Y., Valle, P. (eds) Numerical and Evolutionary Optimization – NEO 2017. NEO 2017. Studies in Computational Intelligence, vol 785. Springer, Cham. https://doi.org/10.1007/978-3-319-96104-0_8
Download citation
DOI: https://doi.org/10.1007/978-3-319-96104-0_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-96103-3
Online ISBN: 978-3-319-96104-0
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)