Repair Kit Application with Spring Insert in Silentblock of Amortizor

  • D. KushaliyevEmail author
  • L. T. Shulanbayeva
  • B. A. Ermanova
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)


The increase in the requirements for the sliding bearings quality which belong to one of the most widely used types of supports in many mechanisms, machines, devices, in various transport equipments, etc., and in demand in the domestic and international markets, is not only caused by high requirements of international standards, competition between enterprises that produce bearings, but also is associated primarily with the reliability and safety of machinery, especially vehicles—land, air, and water where failure of the bearing can lead to accidents, catastrophes accompanied by the great economic damage. The design of the sliding bearing for the reciprocating rotary motion is presented, which can be used in various units of transport engineering and technological equipment.


Bearing details Spring liner Ratchet effect Change in the diameter of the spring liner Elastic interference instead of the gap 



The work was carried out within the framework of grant financing of the scientific project IRN: №. AP 05133348.


  1. 1.
    Kuranov VG, Vinogradov AN, Denisov AS (2000) Wear and non-weariness: a monograph. SSTU, Saratov, p 136Google Scholar
  2. 2.
    Kuranov VG, Vinogradov AN (2007) Movement without friction and wear: training. SSTU, Saratov, p 52Google Scholar
  3. 3.
    Kuranov VG, Vinogradov AN, Buzov AV, Petrov YuA, Karakozova VA (2001) Bearing of sliding for reciprocating-rotary motion. RU patent 2162556, 31 Mar 2001Google Scholar
  4. 4.
    Vinogradov AN, Kuranov VG (2003) Bearings of sliding for the return-rotational motion on the basis of new tribological principles and effects. In: Restoration and hardening of machine parts: interuniversity scientific compilation. SSTU, Saratov, pp 175–182Google Scholar
  5. 5.
    Khrushchev MM, Babichev MA (1970) Abrasion wear. Science Moscow, p 252Google Scholar
  6. 6.
    Protasov BV (1979) Energy relations in tribosupply and prediction of its longevity. Sarat, Publishing House Saratov University, p 152Google Scholar
  7. 7.
    Kragelsky IV, Dobychin MN, Kombalov VS (1977) Basics of calculations for friction and wear. In: Machine-building, p 526Google Scholar
  8. 8.
    Strecker W (2004) Troubleshooting tilting pad thrust bearings. Mach Lubr Mag, Mar–Apr 2004Google Scholar
  9. 9.
    Sinanoglu Cem, Nair Fehmi, BakiKaramıs M (2005) Effects of shaft surface texture on journal bearing pressure distribution. J Mater Process Technol 168:344–353CrossRefGoogle Scholar
  10. 10.
    Strecker, W (2004) Failure analysis for plain bearings. Mach Lubr Mag, July–Aug 2004Google Scholar
  11. 11.
    Yang BS, Lee YH, Choi BK, Kim HJ (2001) Optimum design of short journal bearings by artificial life algorithm. J Tribol Int 34:427–435CrossRefGoogle Scholar
  12. 12.
    Kushaliev DK (2013) Theoretical substantiation of the application of the conical spring insert instead of the cylindrical bearing for the return-rotational movement in the silencer blocks of the shock absorbers. Vestn Saratov State Tech Univ 1(73):231–235Google Scholar
  13. 13.
    Kushaliev DK, Vinogradov AN, Salimov BN, Hamsin AM, Adilova NB, Narikov KA (2014) Development of new friction bearing for swinging movement in knots of transport equipment and its processing by superfinishing. Life Sci J 11(1):286–290Google Scholar
  14. 14.
    Vinogradov AN, Kuranov VG, Kuranov VV, Kushaliev DK, Lin’kov ED (2013) Sliding bearing for reciprocating rotary motion. RU patent 2499920, Nov 2013Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • D. Kushaliyev
    • 1
    Email author
  • L. T. Shulanbayeva
    • 1
  • B. A. Ermanova
    • 2
  1. 1.West Kazakhstan Agrarian-Technical University Named Zhangir KhanUralskRepublic of Kazakhstan
  2. 2.Kazakhstan University of Innovative and Telecommunication SystemsUralskRepublic of Kazakhstan

Personalised recommendations