Skip to main content

Use of Lean-Sigma as a Problem-Solving Method in a Restrictive Environment

  • Chapter
  • First Online:
Managing Innovation in Highly Restrictive Environments

Abstract

This chapter presents the use of Lean-Sigma methodology and tools in a Latin American restrictive environment where time, economic, and technological limitations are common. These conditions limits the use of solutions such as reengineering and major technological investments. The mentioned restrictive characteristics are the perfect scenario for the use of fast and efficient solutions for customer-focused challenges. Lean-Sigma is a fast responder methodology focused on problem-solving using the effective approach of Lean Manufacturing combined with the statistical analysis of Six-Sigma. The use of Lean-Sigma methodology has been previously reported, and its value proved as an efficient solving methodology in highly restrictive environments. However, this chapter describes the inclusion of Design for Six Sigma (DFSS). After the initial considerations, an example related to a production problem in an exterior-home products, is described from a manufacturing facility at Juarez, Mexico. The project is focused on a brass component for outdoor lighting products. The customer complaints shows that this component comes from the supplier with differences in color and tones, through the combination of Lean-Sigma and DFSS a solution is given. The solution includes the design of a qualitative measuring device, the modification of a cleaning process, and the standardization of the chemical coloring process (Patina). Once validated, the designed device was also used for determining the acceptance levels at the incoming inspection station and was incorporated into the quality control station. Finally, the results and knowledge were successfully transferred to the supplier. The results shows that the combination of Lean-Sigma with the DFSS methodologies and their tools can satisfactorily be used in a restrictive environment.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 84.99
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 109.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book
USD 109.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Similar content being viewed by others

References

  • Alba-Baena, N., & Estrada F. J., Sierra Torres O. O. (2016). Using lean-sigma for the integration of two products during a ramp-up event. In: A.-H. Giner, S.-R. Cuauhtémoc, G.-A. Jorge Luis (Eds.) Handbook of research on managerial strategies for achieving optimal performance in industrial processes (pp. 405–427). Hershey, PA, USA: IGI Global. https://doi.org/10.4018/978-1-5225-0130-5.ch019.

  • Ashby, M. (2008). The CES EduPack database of natural and man-made materials. Cambridge, UK: Cambridge University and Granta Design.

    Google Scholar 

  • Camacho, J., Baena, N. A., Hernández, A., Molina, J., Barrera, M. F. R., & de León, D. Z. (2016). Mejora de productividad de una línea de producción a través de la implementación de un programa especializado a la captura del métrico de eficiencia general de los equipos “OEE”. CULCyT (55).

    Google Scholar 

  • Contreras, Ó. F., Carrillo, J., Garcia, H., & Olea, M. J. (2006). Desempeño laboral de las maquiladoras: Una evaluación de la seguridad en el trabajo. Frontera norte, 18(35), 55–86.

    Google Scholar 

  • Coy, M. R., Salazar, J. M., Martínez, L. F. F., & Baena, N. A. (2016) Aplicación de la Metodología Seis Sigma para controlar los parámetros significativos en la producción de un guante de Nylon con recubrimiento de Látex. CULCyT (58).

    Google Scholar 

  • de la Cruz Rodríguez, M. I., Orantes, F. J. E., Mendoza, M. D., Saldaña, J. F. E., & Rodríguez, R. R. (2016). Metodología para el mejoramiento continuo de procesos de manufactura, basado en lean sigma y aplicada al proceso de elaboración de arneses automotrices. CULCyT (56).

    Google Scholar 

  • Deming, W. E. (1986) Out of the crisis. Massachusetts Institute of Technology (p. 510). Cambridge, MA: Center for advanced engineering study.

    Google Scholar 

  • Estrada-Orantes, F. J., & Alba-Baena, N.G. (2014) Creating the Lean-Sigma Synergy. In: J. L. García-Alcaraz., A. A. Maldonado-Macías, & G. Cortes-Robles (Eds.) Lean manufacturing in the developing world: methodology, case studies and trends from latin America (pp. 117–134). Cham: Springer International Publishing. https://doi.org/10.1007/978-3-319-04951-9_6.

    Chapter  Google Scholar 

  • George, M., Maxey, J., Rowlands, D., & Upton, M. (2004). The lean six sigma pocket toolbook: A quick reference guide to 70 tools for improving quality and speed. Mcgraw-hill.

    Google Scholar 

  • George, M. L. (2002) Lean Six sigma: combining six sigma quality with lean production speed. McGraw-Hill Education.

    Google Scholar 

  • George, M. L., & George, M. (2003). Lean six sigma for service. New York, NY: McGraw-Hill.

    Google Scholar 

  • Gracia, O. C., Orantes, F. J. E., & Pérez, F. H. (2016). Aplicación de la metodología Lean-Sigma en la solución de problemas en procesos de manufactura: Caso de Estudio. CULCyT (57).

    Google Scholar 

  • Hopp, W. J., & Spearman, M. L. (2011) Factory physics. Waveland Press.

    Google Scholar 

  • López, D. R., Gaytán, M. C. C., Baena, N. A.,& Orantes, F. E. (2016). Diseño de una estación de medición y análisis del proceso de engastado de cables. CULCyT (58).

    Google Scholar 

  • Ohno, T. (1988). Toyota production system: beyond large-scale production. CRC Press.

    Google Scholar 

  • Pande, P. S., Neuman, R. P., & Cavanagh, R. R. (2000). The six sigma way. McGraw-Hill.

    Google Scholar 

  • Pérez, A. H. G., Orantes, F. J. E., & Pérez F. H. (2016). Diseño de parámetros robusto utilizando el método Taguchi aplicado a un equipo de crimpado de fusibles tipo midget. CULCyT (57).

    Google Scholar 

  • Rath, S. (2000). Six Sigma Pocket Guide Rath and Strong management consultants. MA, USA: Lexinton.

    Google Scholar 

  • Romo, J. S., Baena, N. A, González, J. R., Pérez, D. M. A., & Orantes, F. E. (2016). Rediseño y caracterización de un equipo de prueba eléctrica en el ensamble del producto Jack Bam. CULCyT (59).

    Google Scholar 

  • Schonberger, R. J. (2008). World class manufacturing. Simon and Schuster.

    Google Scholar 

  • Sifuentes, A. M., Orantes, F. J. E., Baena, N. A., Urdiales, M.G. V., Mandujano, H. A. T., & Salcido, M. H. T. (2016). Implementación de la metodología lean-sigma para la reducción de tiempos de preparación de maquinaria. CULCyT (57).

    Google Scholar 

  • Wilson PA (2010) Maquiladoras. Texas State Historical Association. Retrieved October 26, 2017, from http://www.tshaonline.org/handbook/online/articles/dzm02.

  • Womack, J. P., & Jones, D. T. (2010). Lean thinking: banish waste and create wealth in your corporation. Simon and Schuster.

    Google Scholar 

  • Womack, J. P., Jones, D. T., & Roos, D. (1990). Machine that changed the world. Simon and Schuster.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Noé Alba-Baena .

Editor information

Editors and Affiliations

Rights and permissions

Reprints and permissions

Copyright information

© 2019 Springer International Publishing AG

About this chapter

Check for updates. Verify currency and authenticity via CrossMark

Cite this chapter

Alba-Baena, N., Estrada-Orantes, F., Valenzuela-Reyes, C. (2019). Use of Lean-Sigma as a Problem-Solving Method in a Restrictive Environment. In: Cortés-Robles, G., García-Alcaraz, J., Alor-Hernández, G. (eds) Managing Innovation in Highly Restrictive Environments. Management and Industrial Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-93716-8_2

Download citation

  • DOI: https://doi.org/10.1007/978-3-319-93716-8_2

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-319-93715-1

  • Online ISBN: 978-3-319-93716-8

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics