Abstract
This paper introduces a novel hybrid construction concept, namely Sparse Concrete Reinforcement In Meshworks (SCRIM), that intersects robot-based 3D Concrete Printing (3DCP) and textile reinforcement meshes to produce lightweight elements. In contrast to existing 3DCP approaches, which often stack material vertically, the SCRIM approach permits full exploitation of 6-axis robotic control by utilising supportive meshes to define 3D surfaces onto which concrete is selectively deposited at various orientation angles. Also, instead of fully encapsulating the textile in a cementitious matrix using formworks or spraying concrete, SCRIM relies on sparsely depositing concrete to achieve structural, tectonic and aesthetic design goals, minimising material use. The motivation behind this novel concept is to fully engage the 3D control capabilities of conventional robotics in concrete use, offering an enriched spatial potential extending beyond extruded geometries prevalent in 3DCP, and diversifying the existing spectrum of digital construction approaches. The SCRIM concept is demonstrated through a small-scale proof-of-concept and a larger-scale experiment, described in this paper. Based on the results, we draw a critical review on the limitations and potentials of the approach.
Keywords
- 3D concrete printing
- Textile reinforcement
- Robotic fabrication
This is a preview of subscription content, access via your institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Wray, P., Scrivener, K.: Straight talk with Karen Scrivener on cements, CO2 and sustainable development. Am. Ceramic Soc. Bull. 91, 47–50 (2012)
Ritchie, H., Roser, M.: CO2 and other Greenhouse Gas Emissions (2017). https://ourworldindata.org/co2-and-other-greenhouse-gas-emissions. Accessed 28 Feb 2018
Pottmann, H., Wallner, J.: Geometry and Freeform Architecture (2010). http://www.geometrie.tugraz.at/wallner/matharch.pdf. Accessed 28 Feb 2018
Hickert, S.: Evaluation of free-form concrete architecture, moulding systems and their technical potentials. J. Facade Des. Eng. 3(3–4), 273–288 (2015)
Costanzi, C.B.: 3D Printing Concrete Onto Flexible Surfaces. Delft University of Technology (2016). https://repository.tudelft.nl/islandora/object/uuid%3A84d36c2e-8969-4432-b1a5-c9c02e6304f6. Accessed 08 May 2018
Nelson, M.S., Fam, A.Z., Busel, J.P., Bakis, C.E., Nanni, A., Bank, L.C., Henderson, M., Hanus, J.: Fiber-reinforced polymer stay-in-place structural forms for concrete bridge decks: state-of-the-art review. ACI Struct. J. 111(5), 1069–1079 (2014)
Veenendaal, D., West, M., Block, P.: History and overview of fabric formwork: using fabrics for concrete casting. Struct. Concrete 12(3), 164–177 (2011)
Pegna, J.: Exploratory investigation of solid freeform construction. Autom. Constr. 5, 427–437 (1997)
Khoshnevis, B.: Automated construction by contour crafting related robotics and information technologies. Autom. Constr. 13, 5–19 (2004)
Neudecker, S., Bruns, C., Gerbers, R., Heyn, J., Dietrich, F., Dröder, K., Raatz, A., Kloft, H.: A new robotic spray technology for generative manufacturing of complex concrete structures without formwork. In: Procedia CIRP (2016)
Hack, N., Lauer, W.V.: Mesh-Mould: robotically fabricated spatial meshes as reinforced concrete formwork. Architectural Des. 84(3), 44–53 (2014)
Block, P., Schlueter, A., Veenendaal, D., Bakker, J., Begle, M., Hischier, I., Hofer, J., Jayathissa, P., Maxwell, I., Mendez Echenagucia, T., Nagy, Z., Pigram, D., Svetozarevic, B., Torsing, R., Verbeek, J., Willmann, A., Lydon, G.P.: NEST HiLo: investigating lightweight construction and adaptive energy systems. J. Build. Eng. 12, 332–341 (2017)
Lloret, E., Shahab, A.R., Linus, M., Flatt, R.J., Gramazio, F., Kohler, M., Langenberg, S.: Complex concrete structures: merging existing casting techniques with digital fabrication. Comput. Aided Des. 60, 40–49 (2015)
Buswell, R., Leal da Silva, W.R., Jones, S.Z., Dirrenberger, J.: 3D printing using concrete extrusion: a roadmap for research. Cement and Concrete Research (2018, accepted for publication)
Leal da Silva, W.R.: 3D printed constructions - engineering perspective (Presentation Slides). In: 3D Printet Byggeri Conference, Denmark (2017). https://www.dti.dk/_/media/67675_3DPrintetByggeri_Konference_TeknologiskInstitute.pdf. Accessed 28 Feb 2018
Bos, F., Wolfs, R., Ahmed, Z., Salet, T.: Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing. Virtual Phys. Prototyping 11(3), 209–225 (2016)
Popescu, M., Reiter, L., Liew, A., Van Mele, T., Flatt, R.J., Block, P.: Building in concrete with an ultra-lightweight knitted stay-in-place formwork: prototype of a concrete shell bridge. Structures 14, 322–332 (2018)
Tam, K.M.M., Coleman, J.R., Fine, N.W., Mueller, C.T.: Robotics-enabled stress line additive manufacturing. In: Reinhardt, D., Saunders, R., Burry, J. (eds.) Robotic Fabrication Architecture, Art and Design 2016, pp. 351–361. Springer International Publishing Switzerland (2016)
Acknowledgements
Danish Agency for Science and Higher Education for funding the project “3D Printet Byggeri” at the Danish Technological Institute. The authors gratefully acknowledge the assistance of Stian Vestly Holte, Kit Wai Chan, Alma Bangsgaard Svendsen and Suna Ezra Petersen, enrolled at the Master of Architecture programme CITAstudio: Computation in Architecture, KADK. The authors also wish to thank the anonymous reviewers for their comments and suggestions to improve the quality of the paper.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Ayres, P., Leal da Silva, W.R., Nicholas, P., Andersen, T.J., Greisen, J.P.R. (2019). SCRIM – Sparse Concrete Reinforcement in Meshworks. In: Willmann, J., Block, P., Hutter, M., Byrne, K., Schork, T. (eds) Robotic Fabrication in Architecture, Art and Design 2018. ROBARCH 2018. Springer, Cham. https://doi.org/10.1007/978-3-319-92294-2_16
Download citation
DOI: https://doi.org/10.1007/978-3-319-92294-2_16
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-92293-5
Online ISBN: 978-3-319-92294-2
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)