Abstract
Heat generated from the combustion of biomass can be used as an energy source in an organic Rankine cycle (ORC). In this paper, a thermal model of an integrated biomass-fired regenerative ORC system is formed. To model the heat exchangers, a discretization scheme is used that includes the phase change within a segment. Energy balances are applied to the turbine and the pump. The ORC model developed for is validated with experimental data of an existing ORC system. Then, the effect of biomass type on the performance of the system (i.e. the net power output and the thermal efficiency) is investigated.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Qiu G, Liu H, Riffat S (2011) Expanders for micro-CHP systems with organic Rankine cycle. Appl Therm Eng 31:3301–3307
Guo T, Wang HX, Zhang SJ (2011) Selection of working fluids for a novel low-temperature geothermally-powered ORC based cogeneration system. Energy Conversation Management 52:2384–2391
Chen H, Goswami DY, Stefanakos EK (2011) A review of thermodynamic cycles and working fluids for the conversion of low-grade heat. Renew Sust Energ Rev 14:3059–3067
Maizza V, Maizza A (1996) Working fluids in non-steady flows for waste energy recovery systems. Appl Therm Eng 16:579–590
Marion M, Voicu I, Tiffonnet AL (2012) Study and optimization of a solar subcritical organic Rankine cycle. Renew Energy 48:100–109
Lakew AA, Bolland O, Bolland O (2010) Working fluids for low-temperature heat source. Appl Therm Eng 30:1262–1268
Huang Y, Wang YD, Rezvani S, McIlveen-Wright DR, Anderson M, Mondol J, Zacharopolousa A, Hewitta NJ (2013) A techno-economic assessment of biomass fuelled trigeneration system integrated with organic Rankine cycle. Appl Therm Eng 53:325–331
Karellas S, Schuster A, Leontaritis AD (2012) Influence of supercritical ORC parameters on plate heat exchanger design. Appl Therm Eng 33-34:70–76
Harris C, Despa M, Kelly K (2000) Design and fabrication of a cross flow micro heat exchanger. J Microelectromech Syst 9:502–508
Baumann T, Zunft S (2012) Moving bed heat exchanger for solar central receiver power plants: a multi-phase model and parameter variations. Solar PACES 2012, 11–14 September, Marrakech
Lee S, Bae C (2008) Design of a heat exchanger to reduce the exhaust temperature in a spark-ignition engine. Int J Therm Sci 47:468–478
Zipf V, Neuhäuser A, Willert D, Nitz P, Gschwander S, Platzer W (2013) High temperature latent heat storage with a screw heat exchanger: design of prototype. Appl Energy 109:462–469
Walraven D, Laenen B, D’Haeseleer W (2014) Comparison of shell-and-tube with plate heat exchangers for the use in low-temperature organic Rankine cycles. Energy Convers Manag 87:227–237
Walraven D, Laenen B, D’Haeseleer W (2014) Optimum configuration of shell-and-tube heat exchangers for the use in low-temperature organic Rankine cycles. Energy Convers Manag 83:177–187
Kakac S, Liu H, Pramuanjaroenkij A (2012) Heat Exchangers: Selection, Rating, and Thermal Design, 3rd edn. CRC Press, Boca Raton
Colpan CO (2005) Exergy analysis of combined cycle cogeneration systems, Ms.C. Thesis, Middle East Technical University
Szargut J (2005) Exergy Method: Technical and Ecological Applications. WIT Press, Billerica
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG, part of Springer Nature
About this chapter
Cite this chapter
Calli, O., Colpan, C.O., Gunerhan, H. (2018). Thermal Modelling of a Plate-Type Heat Exchanger-Based Biomass-Fired Regenerative Organic Rankine Cycle. In: Nižetić, S., Papadopoulos, A. (eds) The Role of Exergy in Energy and the Environment. Green Energy and Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-89845-2_14
Download citation
DOI: https://doi.org/10.1007/978-3-319-89845-2_14
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-89844-5
Online ISBN: 978-3-319-89845-2
eBook Packages: EnergyEnergy (R0)