Abstract
The paper presents utilization of open-source finite element method (FEM) software for modelling of measurement process on eddy current tomography setup. Methodology of measurements is presented, as well as software for forward tomography transformation. Developed software was based entirely on the open-source programs, which results in a high possibility of the methods implementation in industry. Presented approach for forward tomography transformation is based on numerical reconstruction of the measurement procedure in which tomography setup was simplified to two coils and measured object. Values of signal amplitude and phase shift in corresponding measurement points obtained during modelling, present high compatibility with the measurement results. This confirms correctness of the proposed method and indicate that such approach may be utilized for developing algorithms for inverse tomography transformation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Salach, J.: Non-destructive testing of cylindrical ferromagnetic and non-magnetic materials using eddy current tomography. In: Mechatronics - Ideas for Industrial Application. Advances in Intelligent Systems and Computing, vol. 317, pp. 373–380 (2015)
Premel, D., Mohammad-Djafari, A.: Eddy current tomography in cylindrical geometry. IEEE Trans. Magn. 31(3), 2000–2003 (1995)
Hoła, J., et al.: Identification of moisture content in brick walls by means of impedance tomography. COMPEL – Int. J. Comput. Math. Electr. Electron. Eng. 31(6), 1774–1792 (2012)
Soleimani, M., Lionheart, W.R., Peyton, A.J.: Image reconstruction for high-contrast conductivity imaging in mutual induction tomography for industrial applications. IEEE Trans. Instrum. Meas. 56(5), 2024–2032 (2007)
Sikora, R., Kaminska, A., Sikora, J.: The inverse problem solution for infinite regions using the impedance tomography technique. IEEE Trans. Magn. 32(3), 1294–1297 (1996)
Zacharopoulos, A., Arridge, S., Dorn, O., Kolehmainen, V., Sikora, J.: 3D shape reconstruction in optical tomography using spherical harmonics and BEM. J. Electromagn. Waves Appl. 20(13), 1827–1836 (2006)
Pham, M.H., Peyton, A.J.: A model for the forward problem in magnetic induction tomography using boundary integral equations. IEEE Trans. Magn. 44(10), 2262–2267 (2008)
Nowak, P., Nowicki, M., Juś, A., Szewczyk, R.: Utilization of eddy current tomography in automotive industry. Acta Phys. Pol. A 131(4), 1168–1170 (2017)
Praczukowska, A., Nowicki, M., Korobiichuk, I., Szewczyk, R., Salach, J.: Modeling and validation of magnetic field distribution of permanent magnets system. Int. J. Sci. Eng. Res. 6(5), 78 (2015)
Raback, P., Malinen, M., Ruokolainen, J., Pursula, A., Zwinger, T.: Elmer models manual. CSC–IT Center for Science (2016)
Bossavit, A.: Whitney forms: a class of finite elements for three-dimensional computations in electromagnetism. IEE Proc. – Phys. Sci. Meas. Instrum. Manag. Educ. – Rev. 135, 493–500 (1988)
Shewchuk, J.R.: Lecture Notes on Delaunay Mesh Generation (2012)
Acknowledgement
This work was partially supported by the statutory funds of Institute of Metrology and Biomedical Engineering.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Nowak, P., Nowicki, M., Szewczyk, R. (2018). FEM-Based Forward Eddy Current Tomography Transformation for Automotive Industry. In: Szewczyk, R., Zieliński, C., Kaliczyńska, M. (eds) Automation 2018. AUTOMATION 2018. Advances in Intelligent Systems and Computing, vol 743. Springer, Cham. https://doi.org/10.1007/978-3-319-77179-3_67
Download citation
DOI: https://doi.org/10.1007/978-3-319-77179-3_67
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-77178-6
Online ISBN: 978-3-319-77179-3
eBook Packages: EngineeringEngineering (R0)