Abstract
The current chapter describes the design and the implementation of a remote laboratory for heat transfer learning purposes. It summarizes the main steps of the work carried out to adapt and redesign the heat exchanger bench to be remotely accessed and controlled. This new device introduced many fundamental aspects of heat transfer, both theoretically and practically. An evaluation procedure was also carried out on this remote lab. This evaluation was focused on some technical and pedagogical aspects. The evaluation results demonstrated that the expected learning outcomes of remote labs seem to be very interesting compared to a conventional lab.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Cazacu, D. (2014). A remote laboratory for frequency-response analysis of vibrating mechanical system. Procedia Technology, 12, 675–680.
Chandre, B. R., Geevarghese, K. P., & Gangadhara, K. V. (2014). Design and implementation of remote mechatronics laboratory for eLearning using LabVIEW and smartphone and cross-platform communication toolkit (SCCT). Procedia Technology, 14, 108–115.
Coquard, P., Guillemot, M., Leleve, A., Noterman, D., Ben, M., & H. (2008). AIP-Primeca RAO remote laboratories in automation. International Journal of Online Engineering, 4(1), 12–18.
Dashboard. (2017). The iLab project. Retrieved from http://ilab.mit.edu/wiki
Douka, S. (2010). The teaching of Greek traditional dances in the context of physical education lessons, 11th Panhellenic Conference Sport Management, Recreation & Sport Tourism, Serres, Greece.
Fabregas, E., Farias, G., Dormido-Canto, S., Dormido, S., & Esquembre, F. (2011). Developing a remote laboratory for engineering education. Computers & Education, 57, 1686–1697.
Felder, R. M., & Solomon, B. A. (1991). Index of learning styles. Retrieved from http://www.ncsu.edu/felder-public/ILSpage.html
Gomes, L., & Bogosyan, S. (2009). Current trends in remote laboratories. IEEE Transactions on Industrial Electronics, 56(12), 4744–4756.
Gravier, C., Fayolle, J., Bayard, B., Ates, M., & Lardon, J. (2008). State of the art about remote laboratories paradigms – Foundations of ongoing mutations. International Journal of Online Engineering, 4(1), 19–25.
Guerra, T. C., de León Morales, J., Traore, D., Glumineau, A., & Boisliveau, R. (2007). Teleoperation of an experimental platform of electrical machines through the Internet. In Proceedings of the 2nd International Conference on Digital Information Management, ICDIM’07, Lyon, France.
Guimarães, E. G., Cardozo, E., Moraes, D. H., & Coelho, P. R. (2011). Design and implementation issues for modern remote laboratories. IEEE Transactions on Learning Technologies, 4(2), 149–161.
Hansen, E. (1990). The role of interactive video technology in higher education: Case study and proposed framework. Educational Technology, 30, 13–21.
Hardison, J. L., DeLong, K., Bailey, P. H., & Harward, V. (2008). Deploying interactive remote labs using the iLab shared architecture. The 38th SEE/IEEE Frontiers in Education Conference, Saratoga Springs, NY.
Lund, A. M. (2001). Measuring usability with the USE questionnaire. Usability Interface, 8(2), 3–6. Retrieved from www.stcsig.org/usability/newsletter/index.html.
Mann, H. B., & Whitney, D. R. (1947). On a test of whether one of two random variables is stochastically larger than the other. Annals of Mathematical Statistics, 18(1), 50–60. https://doi.org/10.1214/aoms/1177730491.
Mao, T. (2007). Scheduling services and security ticket token services in iLab interactive service. Master’s thesis, Massachusetts Institute of Technology Cambridge, USA).
Naddami, A., Falhi, A., Gourmai, M., & Moussetad, M. (2014). Determination of synchronous machine parameters using iLab shared architecture. International Journal of Online Engineering, 10(3), 18–23.
Nasri, I., Ennetta, R., & Bouallègue, S. (2015). Mechanical remote laboratory development using iLab shared architecture. International Journal of Online Engineering, 5, 31–37.
National Instruments. (2017). Retrieved from http://www.ni.com
Odeh, S. (2014). A web-based remote lab platform with reusability for electronic experiments in engineering education. International Journal of Online Engineering, 10(4), 40–45.
Scanlon, E., Colwell, C., Cooper, M., & Di Paolo, T. (2004). Remote experiments, re-versioning and re-thinking science learning. Computers & Education, 43(1–2), 153–163.
Schauer, F., Ozvoldova, M., Lustig, F., & Dekar, M. (2008). Real remote mass-spring laboratory experiments across internet-inherent part of integrated E- learning of oscillations. International Journal of Online Engineering, 4(1), 52–55.
Schoor, C., & Körndle, H. (2012) Checklist for a didactically sound design of eLearning content. eLearning Papers, 29, 1–6. ISSN: 1887–1542.
Shroff, R., Soumare, H., Hardison, J., del Alamo, J., & Harward, J. (2009). A versatile internet-accessible electronics workbench with troubleshooting capabilities. The 6th International Conference on Remote Engineering and Virtual Instrumentation, REV 2009, Bridgeport, CT, USA.
Tobarra, L., Ros, S., Hernández, R., Marcos-Barreiro, A., Robles-Gómez, A., Caminero, A. C., Pastor, R., & Castro, M. (2015). Creation of customized remote laboratories using deconstruction. IEEE Revista Iberoamericana De Tecnologias Del Aprendizaje, 10(2), 69–76.
Tsiatsos, T., Douka, S., Mavridis, A., Tegos, S., Naddami, A., Zimmer, T., & Geoffroy, D. (2014). Evaluation plan and preliminary evaluation of a network of remote labs in the Maghrebian countries. International Journal of Online Engineering, 10(5), 15–20.
Zimmer, T., Geoffroy, D., Pester, A., Oros, R., Tsiatsos, Th., & Douka, S. (2013, July). eSience: Setting up a network of remote labs in the Maghrebian countries. International Conference on Engineering Education and Research (iCEER 2013), Marrakesh, Morocco.
Zutin, D. G., Auer, M. E., & Gustavsson, I. (2011). A VISIR lab server for the iLab shared architecture. 2011 IEEE Global Engineering Education Conference (EDUCON): Learning Environments and Ecosystems in Engineering Education, 30–33, Amman, Jordan.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG, part of Springer Nature
About this chapter
Cite this chapter
Ennetta, R., Nasri, I., Bouallègue, S., Tsiatsos, T. (2018). Design and Implementation of a Remote Laboratory for Heat Transfer Experiments. In: Auer, M., Azad, A., Edwards, A., de Jong, T. (eds) Cyber-Physical Laboratories in Engineering and Science Education. Springer, Cham. https://doi.org/10.1007/978-3-319-76935-6_14
Download citation
DOI: https://doi.org/10.1007/978-3-319-76935-6_14
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-76934-9
Online ISBN: 978-3-319-76935-6
eBook Packages: EducationEducation (R0)