Abstract
This chapter describes a test campaign to evaluate the applicability of IRT to detect moisture in walls of buildings in use. The passive approach was implemented and moisture was detected due to the effect of evaporative cooling. Moisture in the walls under study had two different sources: rising damp and infiltration of rainwater. Rising damp was assessed in an exterior wall of a basement in a residential building, and infiltration of rainwater was evaluated in three locations, two exterior walls of a room in a residential building and in a wall of a classroom. The thermal images were compared with the results provided by a moisture detector.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Avdelidis N, Moropoulou A, Theoulakis P (2003) Detection of water deposits and movement in porous materials by infrared imaging. Infrared Phys Technol 44(3):183–190
Barreira E, Almeida RMSF, Delgado JMPQ (2016) Infrared thermography for assessing moisture related phenomena in building components. Constr Build Mater 110:251–269
Edis E, Flores-Colen I, Brito J (2014) Passive thermographic detection of moisture problems in façades with adhered ceramic cladding. Constr Build Mater 51:187–197
Edis E, Flores-Colen I, Brito J (2015) Quasi-quantitative infrared thermographic detection of moisture variation in facades with adhered ceramic cladding using principal component analysis. Build Environ 94:97–108
Grinzato E, Cadelano G, Bison P (2010) Moisture map by IR thermography. J Mod Opt 57(18):1770–1778
Lerma JL, Cabrelles M, Portalés C (2011) Multitemporal thermal analysis to detect moisture on a building façade. Constr Build Mater 25(5):2190–2197
Menezes A, Gomes MG, Flores-Colen I (2015) In-situ assessment of physical performance and degradation analysis of rendering walls. Constr Build Mater 75:283–292
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2019 The Author(s), under exclusive licence to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Barreira, E., Almeida, R.M.S.F. (2019). IRT Versus Moisture: In Situ Tests in Indoor Environment. In: Infrared Thermography for Building Moisture Inspection. SpringerBriefs in Applied Sciences and Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-75386-7_4
Download citation
DOI: https://doi.org/10.1007/978-3-319-75386-7_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-75385-0
Online ISBN: 978-3-319-75386-7
eBook Packages: EngineeringEngineering (R0)