Advertisement

Controllability and Observability

  • André Preumont
Chapter
Part of the Solid Mechanics and Its Applications book series (SMIA, volume 246)

Abstract

This chapter is devoted to the analysis of the controllability and the observability. The goal pursued is to derive quantitative rather than qualitative measures which can be used in actuator and sensor placement. The chapter reviews some concepts which have been proposed to this end. The controllability and observability Gramians are introduced and a coordinate transformation is performed to define a set of internally balanced coordinates that can be used in model reduction. For the particular case of lightly damped flexible structures considered here, if modal coordinates are used, it turns out that the static gains of the various modes constitute a valuable aggregate information regarding the contribution of a mode to the input–output relationship, and can therefore be used in model reduction. The chapter concludes with a short list of references and a set of problems.

Keywords

Controllability Observability Control canonical form PHB test Gramians Internally balanced coordinates Model reduction 

References

  1. 1.
    Ackermann J (1985) Sampled-data control systems. Springer, BerlinCrossRefzbMATHGoogle Scholar
  2. 2.
    Franklin GF, Powell JD, Emami-Naeini A (1986) Feedback control of dynamic systems. Addison-Wesley, ReadingGoogle Scholar
  3. 3.
    Gawronski WK (2004) Advanced structural dynamics and active control of structures. Springer, BerlinCrossRefzbMATHGoogle Scholar
  4. 4.
    Hamdan AMA, Nayfeh AH, (1989) Measure of modal controllability and observability for first and second order linear systems. AIAA J Guid Control Dyn 12(5):768Google Scholar
  5. 5.
    Hughes PC (1987) Space structure vibration modes: how many exist? Which ones are important? IEEE Control Syst Mag 7:22–28CrossRefGoogle Scholar
  6. 6.
    Junkins JL, Kim Y (1993) Introduction to dynamics and control of flexible structures. In: AIAA education seriesGoogle Scholar
  7. 7.
    Kailath T (1980) Linear systems. Prentice-Hall, Englewood CliffszbMATHGoogle Scholar
  8. 8.
    Kim Y, Junkins JL (1991) Measure of controllability for actuator placement. AIAA J Guid Control Dyn 14(5):895–902CrossRefzbMATHGoogle Scholar
  9. 9.
    Kwakernaak H, Sivan R (1972) Linear optimal control systems. Wiley, New YorkzbMATHGoogle Scholar
  10. 10.
    Moore BC (1981) Principal component analysis in linear systems: controllability, observability and model reduction. IEEE Trans Autom Control AC-26(1):17–32Google Scholar
  11. 11.
    Skelton RE, Hughes PC (1980) Modal cost analysis for linear matrix second-order systems. ASME J Dyn Syst Meas Control 102:151–158MathSciNetCrossRefzbMATHGoogle Scholar
  12. 12.
    Wiberg DM (1971) State space and linear systems. McGraw-Hill Schaum’s outline series in engineeringGoogle Scholar

Copyright information

© Springer International Publishing AG 2018

Authors and Affiliations

  1. 1.Active Structures LaboratoryUniversité Libre de BruxellesBrusselsBelgium

Personalised recommendations