Abstract
5XXX series alloy are used for various applications including automotive, marine and space applications due to their good performance during welding and high corrosion resistance. Commercial Al-Mg-Sc alloys typically contain ~0.2 wt% of Sc and possess improved strength up to 1.5 times. The main limitation for application of these alloys is their high price, so it is necessary to reduce Sc content. Forgings are the popular semi-products for various applications, but depending on scheme of deformation materials can show various structures. This paper deals with the results of investigations of performance of Al-Mg-0.1Sc alloy during hot deformation and further heat treatment. Results of the influence of deformation temperature on mechanical and corrosion properties are introduced. It is shown that even small addition of Sc with proper choice of thermos-mechanical processing can lead to significantly increase of service characteristics with no dramatic reduction of corrosion resistance.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
ASM Specialty Handbook: Aluminum and Aluminum Alloys, J.R. Davis, Ed., ASM International, 1993
G.M. Raynaud, Ph. Gomiero, “Aluminium Alloys for the Marine Market”, Aluminium and its Alloys, No. 79, June (1996) 73
V.I. Elagin, “Legirovanie aluminievih splavov perehodnimi metallami” M. Metallrgiya, 1975. 248 p
V.V. Zakharov, T.D. Rostova, “Yprochnenie aluminievikh splavov pri legirovanii ih scandium”, Metallovedenie I termicheskaya obrabotka 2013. No 12 (702). p. 24–29
T. D. Rostova, V. G. Davydov, V. I. Elagin, and V. V. Zakharov, “Effect of Scandium on Recrystallization of Aluminum and Its Alloys,” Mater. Sci. Forum 331–337, 793–798 (2000)
G. Dlubek, S. Krause, H. Krause, A. L. Beresina, V. S. Mikhalenkov and K. V. Chuistov: Positron Studies of Precipitation Phenomena in Al-Li and in Al-Li-X (X = Cu, Mg or Sc) alloys, J.Phys. Condens. Matter 4 (1992) 6317–6328
J.N. Fridlyander, N.I. Kolobnev, L.B. Khokhlatova, A.L. Berezina, A.V. Katko, A. Haszler and C. Keidel: Texture and Grain Structure of Al-Li-Mg-Zr-Sc Alloy Sheets, Mater. Sci. Forum 331–337 (2000) 867–870
D.K. Ryabov, N.I. Kolobnev, A.O. Ivanova, “Vliyanie dobavok kobalta I scandiya na mehanicheskie haracteristiki I korrosionnyu stoikost profilei iz sredneprochnogo splava Al-Zn-Mg s dobavkoi medi” VIAM works. 2016. No 6 (42). p. 1. Accessed 6 August 2017
V.I. Elagin et al.: Influence of Scandium on the Structure and Properties of Al-Zn-Mg Alloys, Russ. Metall. (4) (1983) 143–146
Yu. A Filatov, V.I Yelagin, V.V Zakharov, “New Al-Mg-Sc alloys”, Materials Science and Engineering: A, V 280, Issue 1, 15 March 2000, Pages 97–101
V.V. Zakharov: Industrial Aluminum Alloys with Scandium Additive, Met. Sci. & Heat Tr. (7) (1995) 283–285
M. E. Drits, M. E. Turkina, E. S. Kadaner, and T. V. Dobatkina, “Structure and Mechanical Properties of Aluminum-Scandium Alloys,” in Rare-Earth Metals in Nonferrous Alloys (Nauka, Moscow, 1975), pp. 160–166
V.G. Davydov, T.D. Rostova, V.V. Zakharov, Yu.A. Filatov and V.I. Yelagin: Scientific Principles of Making an Alloying Addition of Scandium to Aluminium Alloys, Mater. Sci. Eng. A 280 (2000) 30–36
V. Ocenasek and M. Slamova: Resistance to Recrystallization due to Sc and Zr Addition to Al-Mg Alloys, Mater. Charact. 47 (2001) 157–162
S. Agarwal, P. E. Krajewski, and C. L. Briant, “Dynamic recrystallization of AA5083 at 450 ℃. The effects of strain rate and particle size,” Metallurgical and Materials Transactions A, 39(6) (2008), 1277–1289
S.S. Gorelik, “Rekristallizaciya metallov I splavov” M: Metallurgy 1978
A.L. Berezina, U. Schmidt, T.A. Monastyrskaya, K.V. Chuistov, A.V. Kotko and N.I. Kolobnev: Structural State and Decomposition Kinetics in Rapidly Quenched Al-Sc, Al-Mg-Sc Alloys, Mater. Sci. Forum 396–402 (2002) 763–768
I.G. Brodova, D.V. Bashlikov and I.V. Polents: Influence of Heat Time Melt Treatment on the Structure and the Properties of Rapidly Solidified Aluminum Alloys with Transition Metals, Mater. Sci. Forum 269–272 (1998) 589–594
A. Halap, M. Popovic, T. Radetic, V. Vascic, E. Romhanji, “Influence of the thermo-mechanical treatment on the exfoliation and pitting corrosion of an aa5083-type alloy”, MTAEC9, 48(4) 479 (2014)
N.A. Oguocha, O.J. Adigun, S. Yannacopoulos, Effect of sensitization heat treatment on properties of Al-Mg alloy AA5083-H116, J. Mater. Sci. 43(2008) 4208–4214
C. Y. Meng et al., “Effect of Stabilizing Treatment on the Intergranular Corrosion Behavior of High Strength Al-Mg Alloys”, Materials Science Forum, Vols. 794–796, pp. 253–258, 2014
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Krokhin, A.Y., Mann, V.K., Ryabov, D.K., Babitskiy, N.A. (2018). Effect of Treatment Parameters on Structure, Mechanical and Corrosion Properties of Al-Mg-Sc Alloy Forgings with Reduced Concentration of Scandium. In: Martin, O. (eds) Light Metals 2018. TMS 2018. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-319-72284-9_205
Download citation
DOI: https://doi.org/10.1007/978-3-319-72284-9_205
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-72283-2
Online ISBN: 978-3-319-72284-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)