Abstract
The most part the RF pipelines require renovation because of their unsatisfactory state. Besides, the pipelines under operation are subject to biological fouling and at the result reduction of the living cross-section of pipes and increase of the hydraulic resistance and improve energy efficiency. One of the methods, which helps to prevent this situation, is application of a sprayed coating to the inner part of a pipeline. Due to many available market proposals, provision has been made of a complex of bench tests aimed at studying strength characteristics and computer simulation of two types of protective coatings to reveal their modifications during a period of time, i.e. Scotchkote 2400 («3M» Company), which is the most popular one and Subcote FLP, which is a prospective development by the NPP “Polyplastic”. Testing has been made at the electromechanical tensile testing machine Instron 3345 and simulation by the «Ansys» automated computer ware of the finite element analysis. The results of the performed tests permitted to determine the recommended coating thickness depending on the pipeline diameter.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
The State Report State of the sanitary and epidemiological welfare of the population in RF in 2015 (2016)
Maslak, V., Nasonkina, N., Sakharovskaya, V., Gutarova, M., Antonenko, S., Nemova, D.: Procedia Eng. 117, 980–989 (2015)
Federal Law 2011 On water supply and sewage. № 416-FZ, 65 p., Moscow, Kremlin
Huang, Q., Wang, J.: J. Environ. Econ. Manag. 82, 1–16 (2017)
Batchelor, C., Rebby, V., Linstead, C., Dhar, M., Roy, S., May, R.: J. Hydrol. 518, 140–149 (2014)
Ahmad, M., Masih, I., Giordano, M.: Agricult. Ecosyst. Environ. 187, 106–115 (2014)
Aliofkhazraei, M.: Developments in Corrosion Protection. InTech Open Publishers, 698 p. (2014)
Wróbel, G., Szymiczek, M., Wierzbicki, Ł.: J. Mater. Process. Technol. 157–158, 637–642 (2004)
Pridmore, A.B., Ojdrovic, R.P.: Rehabilitation of Pipelines Using Fiber-Reinforced Polymer (FRP) Composites. vol. 1, pp. 17–38 (2015)
Bruce, W.A.: Rehabilitation of Pipelines Using Fiber-Reinforced Polymer (FRP) Composites, vol. 1, pp. 61–78 (2015)
Russian Standard GOST 11262-80 1980
Information on: http://www.pwmag.com/water-sewer/structural-cured-in-place-pipe-for-trunk-water-main_o
SN 550-82 1982 Manual for the Design of Technological Pipelines Made of Plastic Pipes. Moscow, Publishing House of Standards, 33 p.
Tsyss, V.G., Sergaeva, M.Yu.: Procedia Eng. 152, 251–257 (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Orlov, V., Averkeev, I., Pelipenko, A. (2018). Analysis of the Strength Characteristics of Internal Sprayed Protective Coatings of Pipelines to Improve Energy Efficiency. In: Murgul, V., Popovic, Z. (eds) International Scientific Conference Energy Management of Municipal Transportation Facilities and Transport EMMFT 2017. EMMFT 2017. Advances in Intelligent Systems and Computing, vol 692. Springer, Cham. https://doi.org/10.1007/978-3-319-70987-1_41
Download citation
DOI: https://doi.org/10.1007/978-3-319-70987-1_41
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-70986-4
Online ISBN: 978-3-319-70987-1
eBook Packages: EngineeringEngineering (R0)