Abstract
Friction is a complex phenomenon which has negative effects on the precision of positioning systems. Therefore, friction models for use in friction compensation have to show a good performance while remaining simple enough for its use in control algorithms. In this work, a single-state friction model for control purposes is proposed, aiming to simplify the implementation of such control algorithms, while keeping a good performance in friction compensation. This model has been tested on an experimental setup based on a linear motor, and its performance is compared to that of the Generalized Maxwell-slip (GMS) model, showing better performance on the tracking error for low accelerations.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Armstrong-Hélouvry, B., Dupont, P., de Wit, C.C.: A survey of models, analysis tools and compensation methods for the control of machines with friction. Automatica 30, 1083–1138 (1994)
Feng, B., Zhang, D., Yang, J., Guo, S.: A novel time-varying friction compensation method for servomechanism. Math. Probl. Eng. (2015). doi:10.1155/2015/269391
Al-Bender, F., De Moerlooze, K.: Characterization and modeling of friction and wear: an overview. Int. J. Sustain. Constr. Des. 2, 19–28 (2011)
Lampaert, V. Modelling and control of dry sliding friction in mechanical systems. Ph.D. thesis, Katholieke Universiteit Leuven (2003)
Prajogo, T.: Experimental study of pre-rolling friction for motion-reversal error compensation on machine tool drive systems. Ph.D. thesis, Katholieke Universiteit Leuven (1999)
de Wit, C.C.: Olsson, H., Åström, K.J., Lischinsky, P.: A new model for control of systems with friction. IEEE Trans. Autom. Control 40, 419–425 (1995)
Dupont, P., Hayward, V., Armstrong, B., Altpeter, F.: Single state elastoplastic friction models. IEEE Trans. Autom. Control 47, 787–792 (2002)
Swevers, J., Al-Bender, F., Ganseman, C.G., Prajogo, T.: An integrated friction model structure with improved presliding behavior for accurate friction compensation. IEEE Trans. Autom. Control 4, 676–686 (2000)
Al-Bender, F., Lampaert, V., Swevers, J.: The generalized Maxwell-Slip model: a novel model for friction simulation and compensation. IEEE Trans. Autom. Control 50, 1883–1887 (2005)
Boegli, M., De Laet, T., De Schutter, J., Swevers, J.: Moving horizon for friction state and parameter estimation. In: Proceedings of the 2013 European Control Conference, pp. 4142–4147. Zurich (2013)
Boegli, M., De Laet, T., De Schutter, J., Swevers, J.: A smoothed GMS friction model suited for gradient-based friction state and parameter estimation. IEEE/ASME Trans. Mechatron. 19, 1593–1602 (2014)
Villegas, F., Hecker, R., Peña, M.: Two-state GMS-based friction model for precise control applications. Int. J. Precis. Eng. Manuf. 17, 553–564 (2016)
Lu, L., Yao, B., Wang, Q., Chen, Z.: Adaptive robust control of linear motors with dynamic friction compensation using modified LuGre model. Automatica 45, 2890–2896 (2009)
Villegas, F., Hecker, R., Peña, M., Vicente, D., Flores, M.: Modeling of a linear motor feed drive including pre-rolling friction and aperiodic cogging and ripple. Int. J. Adv. Manuf. Technol. 73, 267–277 (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Villegas, F.J., Hecker, R.L., Flores, G.M. (2018). Single-State Friction Model for Control Purposes. In: Carvalho, J., Martins, D., Simoni, R., Simas, H. (eds) Multibody Mechatronic Systems. MuSMe 2017. Mechanisms and Machine Science, vol 54. Springer, Cham. https://doi.org/10.1007/978-3-319-67567-1_25
Download citation
DOI: https://doi.org/10.1007/978-3-319-67567-1_25
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-67566-4
Online ISBN: 978-3-319-67567-1
eBook Packages: EngineeringEngineering (R0)