Abstract
In this study, we evaluate the physical, mechanical, and morphological properties of a clay dispersed styrene-co-glycidal methacrylate (ST-co-GMA) impregnated wood polymer nanocomposite (WPNC). The WPNC was characterized by Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy (SEM), 3-point bending, and free-vibration testing. The FT-IR results showed that the absorbance at 1730 cm−1 was increased for ST-co-GMA-clay-WPNC compared with other nanocomposites and the raw material. The SEM results showed that ST-co-GMA-clay-WPNC had a smoother surface than other nanocomposites and raw wood. The modulus of elasticity (MOE), modulus of rupture (MOR), and dynamic Young’s moduli (E d) of WPNCs were considerably increased compared to wood polymer nanocomposites (WPNCs) and raw wood. The raw wood exhibited a higher water uptake (WU) than WPNCs.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Baysal E, Yalinkilic MK, Altinok M, Sonmez A, Peker H, Colak M (2007) Some physical, biological, mechanical, and fire properties of wood polymer composite (WPC) pretreated with boric acid and borax mixture. Constr Build Mater 21(9):1879–1885
Bhattacharya SS, Aadhar M (2014) Studies on preparation and analysis of organoclay nano particles. Res J Eng Sci 3(3):10–16
Bledzki AK, Mamun AA, Faruk O (2007) Abaca fibre reinforced PP composites: Comparison with jute and flax fibre composites considering fibre contents. eXPRESS Polym Lett 1(11):755–762
Cao Y, Lu J, Huang R, Zhao Y, Wu Y (2011) Evaluation of decay resistance for steam-heat-treated wood. BioRes 6(4):4696–4704
Carroll D (1970) Clay minerals: a guide to their X-ray identification, special paper 126. The Geological Society of America, Boulder, California
Chang HT, Chang ST (2001a) Inhibition of the photodiscoloration of wood by butyrylation. Holz 55(3):255–259
Chang ST, Chang HT (2001b) Comparisons of the photostability of esterified wood. Polym Degrad Stabil 71(2):261–266
Devi RR, Maji K (2007) Effect of glycidyl methacrylate on the physical properties of wood–polymer composites. Polym Compos 28(1):1–5
Dikobe DG, Luyt AS (2007) Effect of poly (ethylene-co-glycidyl methacrylate) compatibilizer content on the morphology and physical properties of ethylene vinyl acetate. Wood Fiber Compos 104(5):3206–3213
Farahani MRM, Taghizadeh F (2010) Roughness of esterified eastern cottonwood. BioRes 5(4):2232–2238
Feist WC, Hon DNS (eds) (1984) Chemistry of weathering and protection. American Chemical Society, Washington, DC, pp 401–451
Guang-jie Z, Wen-hua L, Zheng-hua X (2006) Preparation and characterization of wood/montmorillonite nanocomposites. Forestry Studies China 8(1):35–40
Hamdan S, Rahman MR, Ahmed AS, Islam MS, Talib ZA (2010) Dynamic young’s modulus measurement of treated and post-treated tropical wood polymer composites. BioRes 5(1):324–342
Hamdan S, Rahman MR, Ahmed AS, Islam MS, Talib ZA, Abdullah WFW, Mat MSC (2011) Thermogravimetric analysis and dynamic young’s modulus measurement of N,N-dimethylacetamide-impregnated wood polymer composites. J Vinyl Addit Technol 17(3):177–183
Hamdan S, Rahman RM, Ahmed A, Hasan M, Islam MS (2012) Effect of coupling reactions on the mechanical and biological properties of tropical. Int Biodeterior Biodegrad 72:108–113
Hegde RR (2009) Structure and properties of nanoclay reinforced polymer films, fibers and nonwovens. University of Tennessee, Knoxville
Islam MS, Hamdan S, Hassan A, Sobuz H, Talib ZA (2014) The chemical modification of tropical wood polymer composites. J Compos Mater 48(7):783–789
Jebrane M, Pichavant F, Sebe G (2011) A comparative study on the acetylation of wood by reaction with vinyl acetate and acetic anhydride. Carbohydr Polym 83(2):339–345
Kam TY, Lee TY (1992) Detection of cracks in structures using modal test data. J Eng Fract Mech 42(2):381–387
Kosonen ML, Wang B, Caneba GT, Gardner DJ Rials TG (2000) Polystyrene/wood composites and hydrophobic wood coatings from water-based hydrophilic-hydrophobic block. Clean Prod Proc Springer-Verlag 2:117–123
Le EA, Nairn JA (2014) Measuring interfacial stiffness of adhesively-bonded wood. Wood Sci Technol 48(6):1109–1121
Li YF, Liu YX, Wang XM, Wu QL, Yu HP, Li J (2011) Wood–polymer composites prepared by the in situ polymerization of monomers within wood. J Appl Polym Sci 119(6):3207–3216
Li Y, Liu Z, Dong X, Fu Y, Liu Y (2013) Comparison of decay resistance of wood and wood-polymer composite prepared by in situ polymerization of monomers. Int Biodeterior Biodegrad 84:401–406
Mattos BD, de Cademartori PHG, Lourencon TV, Gatto DA (2014) Colour changes of Brazilian eucalypts wood by natural weathering. Int Wood Prod J 5(1):33–38
Mohanty AK, Misra M, Drzal LT (2002) Sustainable bio-composite from renewable resources: opportunity and challenges in the green materials world. Polym Environ 10(1/2):19–26
Morrell JJ, Stark NM, Pendleton DE, McDonald AG (2006) Durability of wood-plastic composites. Wood Des Focus 16(3):7–10
Prakash GK, Mahadevan KM (2008) Enhancing the properties of wood through chemical modification with palmitoyl chloride. Appl Surf Sci 254(6):1751–1756
Rahman MR, Hamdan S, Ahmed AS, Islam MS (2010) Mechanical and biological performance of sodium metaperiodate-impregnated plasticized wood (PW). BioRes 5(2):1022–1035
Rahman MR, Lai JCH, Hamdan S, Rahman MM, Hossen MF (2015) Impact of nanoclay on physicomechanical and thermal analysis of polyvinyl alcohol/fumed silica/clay nanocomposites. J Appl Polym Sci 132(15):41843
Rowell RM (2006) Chemical modification of wood: a short review. Wood Mater Sci Eng 1(1):29–33
Sposito G (1983) Infrared spectroscopic study of adsorbed water on reduced-charge Na/Li-montmorillonites. Clays Clay Miner 31(1):9–16
Stolf DO, Lahr FAR (2004) Wood-polymer composite: physical and mechanical properties of some wood species impregnated with styrene and methyl methacrylate. J Mater Res 7(4):611–617
Toh HK (1979) A study of diffusion in polymers using C-14 labelled molecules. Loughborough University, Leicestershire, UK
Xie YJ, Hill CAS, Sun D, Jalaludin Z, Wang Q, Mai C (2011) Effects of dynamic aging (hydrolysis and condensation) behaviour of organofunctional silanes in the aqueous solution on their penetrability into the cell walls of wood. BioRes 6(3):2323–2339
Xu Y, Guo Z, Fang Z, Peng M, Shen L (2013) Combination of double-modified clay and polypropylene-graft-malei anhydride for the simultaneously improved thermal and mechanical properties of polypropylene. J Appl Polym Sci 128(1):283–291
Zabel RA, Morrell JJ (1992) Wood microbiology—decay and its prevention. Academic Press, San Diego, California
Acknowledgements
The authors would like to acknowledge the financial support from Ministry of Higher Education Malaysia, for their financial support [Grant no. FRGS/SG02(01)/1085/2013(31)] during the research.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this chapter
Cite this chapter
Rahman, M.R., Hamdan, S., Lai, J.C.H. (2018). Clay Dispersed Styrene-co-glycidyl Methacrylate Impregnated Kumpang Wood Polymer Nanocomposites: Impact on Mechanical and Morphological Properties. In: Wood Polymer Nanocomposites. Engineering Materials. Springer, Cham. https://doi.org/10.1007/978-3-319-65735-6_9
Download citation
DOI: https://doi.org/10.1007/978-3-319-65735-6_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-65734-9
Online ISBN: 978-3-319-65735-6
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)