Abstract
In this chapter, different types of wood polymer nanocomposites (WPNCs) with various clay and monomer were prepared through curing methods, wood-hardening process, and chemical impregnation as well as compression of wood. The samples were ensured to dry at 105 °C up to constant weight before treatment. The dimensions and weights were measured. The samples were undergoing impregnation process in an impregnation vacuum chamber. WPNCs produced were characterized by Fourier Transform Infrared Spectroscopy (FT-IR), compression test, Thermogravimetric Analysis (TGA), and Scanning Electron Microscopy (SEM).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ates S, Akyildiz MH, Ozdemir H (2009) Effects of heat treatment on calabrian pine (Pinus brutia ten.) wood. BioRes 4(3):1032–1043
Ayer SW, Fell D, Wan H (2003) Hardening of solid wood: Market opportunities and review of existing technologies. Forintek Canada Corp, Canada
Baki H, Yalçin Örs M, Hakki A (1993) Improvement of wood properties by impregnation with macromonomeric initiators. J Appl Polym Sci 47:1097–1103
Bergman R, Ibach RE, LaPasha C, Denig J (2009) Evaluating physical properties changes for small diameter plantation-grown southern pine after in situ polymerization of an acrylic monomer. Forest Prod J 59(10):64–71
Betty WR (1976) US 3968318 A, 6 Jul 1976
Bodirlau R, Teaca CA, Spiridon I (2009) Preparation and characterization of composites comprising modified hardwood and wood polymers/poly(vinyl chloride). BioRes 4(4):1285–1304
Border P, Pollet E, Averous L (2009) Nano-biocomposites: Biodegradable polyester/nanoclay system. Prog Polym Sci 34:125–155
Bryant BS (1966) The chemical modification of wood from the point of view of wood science and economics. Forest Product J 16(2):20–27
Cai X, Riedl B, Zhang SY, Wan H (2007a) Formation and properties of nanocomposites made up from solid aspen wood, melamine-urea- formaldehyde and clay. Holz 61:148–154
Cai X, Riedl B, Zhang SY, Wan H (2007b) Effects of nanofillers on water resistance and dimensional stability of solid wood modified by melamine-urea-formaldehyde resin. Wood Fiber Sci 39(2):307–318
Cai X, Riedl B, Zhang SY, Wan H (2008) The impact of interphase between wood, melamine-urea-formaldehyde and layered silicate on the performance of wood polymer nanocomposites. Compos Part A 39:727–737
Deka M, Saikia CN (2000) Chemical modification of wood with thermosetting resin: Effect on dimensional stability and strength property. Biores Technol 73:179–181
Devi RR, Maji TK, Banerjee AN (2003) Studies on dimensional stability and thermal properties of rubber wood chemically modified with styrene and glycidyl methacrylate. J Appl Polym Sci 93:1938–1945
Dobreva D, Nenkova S, St Vsileva (2006) Morphology and mechanical properties of polypropylene-wood flour composites. BioRes 1(2):209–219
Duran JA, Meyer JA (1972) Exothermic heat released during catalytic polymerization of basswood-methyl methacrylate composites. Wood Sci Technol 6:59–66
Ellwood EL, Gilmore RC, Stamm AJ (1972) Dimensional stabilization of wood with vinyl monomers. Wood Sci 4(3):137–141
Feist WC, Rowell RM, Ellis DW (1991) Moisture sorption and accelerated weathering of acetylated and methacrylated aspen. Wood and Fiber Sci 23(1):128–136
Furuno T, Shimada K, Uehara T, Jodai S (1992a) Combinations of wood and silicate II. Wood-mineral composites using water glass and reactants of barium chloride, boric acid, and borax, and their properties. Mokuzai Gakkaishi 38(5):448–457
Furuno T, Uehara T, Jodai S (1991) Combinations of wood and silicate I. Impregnation by water glass and applications of aluminum sulfate and calcium chloride as reactants. Mokuzai Gakkaishi 37(5):462–472
Furuno T, Uehara T, Jodai S (1992b) The role of wall polymer in the decay durabilities of wood-polymer composites. Makuzai Gakkaishi 38(3):285–293
Galperin AS, Kuleshov GG, Tarashkevich VI, Smtov GM (1995) Manufacturing and properties of modified wood dimensional stability. Wood Sci Technol 18:225–240
Georgieva M, Harata M, Miloshev G (2008) The nuclear actin-related protein Act3p/Arp4 influences yeast cell shape and bulk chromatin organization. J Cell Biochem 104(1):59–67
Guevara R, Moslemi AA (1984) The effect of alkylene oxides, furan resin and vinylpyrrolidinone on wood dimensional stability. Wood Sci Technol 18:225
Halabe UB, Bidigalu GM, Ganga Rao HVS, Ross RJ (1995) Nondestructive evaluation of green wood using stress wave and transverse vibration techniques. Mater Eval 55(9):1013–1018
Hamdan S, Talib ZA, Rahman MR, Ahmed AS, Islam MS (2010) Dynamic Young’s modulus measurement of treated and post-treated tropical wood polymer composites (WPC). BioRes 5(1):324–342
Hartman S (1969) Modified wood with aqueous polyurethane systems. Forest Prod J 19(5):39–42
Hoffmann P (1988) On the stabilization of waterlogged oakwood with polyethylene glycol (PEG). Holz 42(5):289–294
Hoffmann P (1990) On the stabiliztion of waterlogged softwoods with polyethylene glycol(PEG). Four species from China and Korea. Holz 44(2):87–93
Inoue M, Ogata S, Nishikawa M, Otsuka Y, Kawai S, Norimoto M (1993) Dimensional stability, mechanical properties, and color changes of a low molecular weight melamine-formaldehyde resin impregnated wood. Mokuzai Gakkaishi 39:181–189
IR Absorptions of Functional Groups (FlashcardExchange, United States of America, 2006), http://www.flashcardexchange.com/cards/ir-absorptions-of-functional-groups-375010. Accessed 20 Nov 2012
Islam MS, Hamdan S, Rahman MR, Jusoh I, Ahmed AS, Idrus M (2011) Dynamic young’s modulus, morphological, and thermal stability of 5 tropical light hardwoods modified by benzene diazonium salt treatment. BioRes 6(1):737–750
Islam MS, Hamdan S, Rahman MR, Jusoh I, Ibrahim NF (2010) Dynamic Young’s modulus and dimensional stability of Batai tropical wood impregnated with polyvinyl alcohol. J Sci Res 2(2):227–236
Juneja SC, Hodgins JW (1970) The properties of thermo-catalytically prepared wood polymer composites. Forest Prod J 20(12):24–28
Langwig JE, Meyer JA, Davidson RW (1968) Influence of polymer impregnation on mechanical properties of basswood. Forest Prod J 18(7):33–36
Langwig JE, Meyer JA, Davidson RW (1969) New monomers used in making wood-plastics. Forest Prod J 19(11):57–61
Larsson P, Simonson R (1994) A study of strength, hardness and deformation of cetylated Scandinavian softwood. Holz Roh Werkst 52:83–86
Li JZ, Furuno T, Katoh S (2001) Preparation and properties of acetylated and propionylated wood-silicate composites. Holz 55(1):93–96
Loos WE, Robinson GL (1968) Rates of swelling of wood in vinyl monomers. Forest Prod J 18(9):109–112
Luckenbach TA, Rheometrics Inc. (Sealseastem 1994), http://www.sealseastem.com/PDF/DynamicMechThermalAnal.pdf. Accessed 12 April 2004
Manchado M, Arroyo M (2000) Thermal and dynamic mechanical properties of polypropylene and short organic fiber composites. Polym 41(21):7761–7767
Mathias LJ, Wright JR (1989) New wood-polymer composites: Impregnation and in situ polymerization of hydroxymethylacrylates. Am Chem Soc Polym Prepr Div Polym Chem 30:233–234
Meyer JA, Siau JF, Skaar C (1965) Dimensional stabilization of wood. Forest Product J 15(4):162–166
Meyer JA, Siau JF, Smith WB (1978) Wood-polymer composites from southern hardwoods. Wood Sci 10(3):158–164
Miroy F, Eymard P, Pizzi A (1995) Wood hardening by methoxymethyl melamine. Holz Roh Werkst 53:276
Noah JN, Foudjet A (1988) Wood-polymer composites from some tropical hardwoods. Wood Sci Technol 22:115–119
Ogiso K, Saka S (1993) Wood-inorganic composites prepared by sol-gel process II. Effects of ultrasonic treatments on preparation of wood- inorganic composites. Mokuzai Gakkaishi 39(3):301–307
Patyakin UU, Vasily I, Sugaipov AR, Birman SM, Bazarov YN, Pilshikov A, Spitsyn Howard DM (2008) Mechanical and chemical modification of wood materials- compressed wood and oxidized charcoal. BioRes 3(3):731–744
Ray SS, Okamoto M (2003) Polymer/layered silicate nano-composites: A review from preparation to processing. Prog Polym Sci 28:1539–1641
Rowell RM (1975) Chemical modification of wood, advantages and disadvantages. Am Wood Preservers Assoc 71:41–51
Rowell RM (2005) Chemical modification of wood for improved adhesion in composites. USDA forest Products Laboratory Madison, Wisconsin, pp 56–60
Rowell RM, Gutzmer DI, Sachs IB, Kinney RE (1976) Effects of alkylene oxide treatments on dimensional stability of wood. Wood Sci 9(1):51–54
Rowell RM, Moisuk R, Meyer JA (1982) Wood-polymer composites: Cell wall grafting with alkylene oxides and lumen treatments with methyl methacrylate. Wood Sci 15:90–96
Saka S, Sasaki M, Tanahashi M (1992) Wood-inorganic composites prepared by sol-gel processing I. Wood-inorganic composites with porous structure. Mokuzai Gakkaishi 38(11):1043–1049
Saka S, Yakake Y (1993) Wood-inorganic composites prepared by sol-gel process III. Chemically-modified wood-inorganic composites. Mokuzai Gakkaishi 39(3):308–314
Salmen NL (1984) Viscoelastic properties of in situ lignin under water saturated conditions. J Mater Sci 19:3090–3096
Schneider MH (1994) Wood polymer composites. Wood Fiber Sci 26(1):142–151
Siau JF (1969) The swelling of basswood by vinyl monomers. Wood Sci 1(4):250–253
Siau JF, Davidson RW, Meyer JA, Skaar C (1968) A geometrical model for wood-polymer composites. Wood Sci 1(2):116–128
Siau JF, Meyer JA (1966) Comparison of the properties of heat and radiation cured wood-polymer combinations. Forest Prod J 16(8):47–56
Siau JF, Smith WB, Meyer JA (1978) Wood-polymer composites from southern hardwoods. Wood Sci 10(3):158–164
Stamm AJ (1959) Effect of polyethylene glycol on the dimensional stability of wood. Forest Prod J 9:375–381
Stamm AJ (1964a) Factors affecting the bulking and dimensional stabilization of wood with polyethylene glycols. Forest Product J 14:403–408
Stamm AJ (1964b) Wood and Cellulose Science. Ronald Press Co, New York
Su S, Wilkie CA (2003) Exfoliated poly(methyl methacrylate) and polystyrene nanocomposites occur when the clay contains a vinyl monomer. J Polym Sci, Part A: Polym Chem 41:1124–1135
Sugiama M, Obataya E, Norimoto MC (1996) Temperature dependence of dynamic viscoelasticity for chemically treated woods. Paper presented at proceedings of the third pacific rimbiobased composites symposium, Kyoto, Japan, 2–5 December 1996
Timmons TK, Meyer JA Jr, Cote WA (1971) Polymer location in the wood- polymer composite. Wood Sci 4(1):13–24
Tunc MS, Lawoko M, Heiningen A (2010) Understanding the limitations of removal of hemicelluloses during autohydrolysis of a mixture of southern hardwoods. BioRes 5(1):356–371
Vetter LD, Stevens M, Acker JV (2009) Fungal decay resistance and durability of organosilicon-treated wood. Int Biodeterior Biodegrad 63:130–134
Yalinkilic MK, Tsunoda K, Takahashi M, Gezer ED, Dwianto W, Nemoto H (1998) Enhancement of biological and physical properties of woof by boric acid-vinyl monomer combination treatment. Holz 52(6):667–672
Yamaguchi H (1994a) Properties of silicic acid compounds as chemical agents for impregnation and fixation of wood. Mokuzai Gakkaishi 40(8):830–837
Yamaguchi H (1994b) Preparation and physical properties of wood fixed with silicic acid compounds. Mokuzai Gakkaishi 40(8):838–845
Yan Wu, Ding GZ, Si QW, Yang Z (2009) Polypropylne composites reinforced with rice straw micro/nano fibrils isolated by high intensity ultrasonication. BioRes 4(4):1487–1497
Yildiz UC, Yildiz S, Gezer ED (2005) Mechanical properties and decay resistance of wood polymer nanocomposites prepared from fast growing species in Turkey. Biores Technol 96:1003–1011
Zollfrank C, Wegener G (2002) FTIR microscopy and ultrastructural investigation of silylated solid wood. Holz 56(1):39–42
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this chapter
Cite this chapter
Rahman, M.R., Hamdan, S. (2018). Preparation and Characterizations of Various Clay- and Monomers-Dispersed Wood Nanocomposites. In: Wood Polymer Nanocomposites. Engineering Materials. Springer, Cham. https://doi.org/10.1007/978-3-319-65735-6_2
Download citation
DOI: https://doi.org/10.1007/978-3-319-65735-6_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-65734-9
Online ISBN: 978-3-319-65735-6
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)