Abstract
Results of numerical simulations on a high-lift configuration with an Ultra High Bypass Ratio (UHBR) engine are shown. In the area of the integrated engine, a complex vortex-system develops. Different longitudinal vortices proceed downstream on the suction side influencing the local flowfield. Steady and unsteady numerical simulations are performed at different angles of attack. As flow solver the DLR TAU Code is used and the Menter-SST eddy viscosity turbulence model and the JHh-v2 Reynolds-Stress-Model are applied. The predicted vortex system is analyzed and the effect on the flow field and the local stall behavior is shown. In particular the effect of the turbulence models of different types on the prediction of the vortex system and the flowfield is pesented.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bier, N., Rohlmann, D., Rudnik, R.: Numerical Maximum Lift Prediction of a Realistic Commercial Aircraft in Landing Configuration. AIAA 2012-0279, Nashville (2012)
Cécora, R.-D., Probst, A., Radespiel, R.: Advanced Reynolds stress turbulence modeling of subsonic and transonic flows. In: Second Symposium “Simulation of Wing and Nacelle Stall”, June 22nd–23rd, Braunschweig (2010)
Cécora, R.-D., Radespiel, R., Eisfeld, B., Probst, A.: Differential Reynolds-Stress modeling for aeronautics. J. Aircr. 53(3), 739–755 (2015)
Craft, T.J., Gerasimov, A.V., Launder, B.E., Robinson, C.M.E.: A computational study of the near-field generation and decay of wingtip vortices. Int. J. Heat Fluid Flow 27, 684–695 (2006)
Crippa, S., Melber-Wilkending, S., Rudnik, R.: DLR Contribution to the First High Lift Prediction Workshop. AIAA 2011-938, Orlando (2011)
Eliasson, P., Catalano, P, Le Pape, M.-C., Ortmann, J., Pelizzari, E., Ponsin, J.: Improved CFD Predictions for High Lift Flows in the European Project EUROLIFT II. AIAA 2007-4303, Miami (2007)
Frhr. v. Geyr, H., Schade, N., v. d. Burg, J.W., Eliasson, P., Esquieu, S.: CFD Prediction of Maximum Lift Effects on Realistic High-Lift-Commercial-Aircraft-Configurations Within the European Project EUROLIFT II. AIAA 2007-4299, Miami (2007)
Haines, A.B., Young, A.D.: Scale effects on aircraft and weapon aerodynamic. AGARDograph 323, 27–65 (1994)
Jakirlic, S., Hanjalic, K.: A new approach to modelling near-wall turbulence energy and stress dissipation. J. Fluid Mech. 459, 139–166 (2002)
Landa, T., Wild, J., Radespiel, R.: Simulation of longitudinal vortices on a high-lift wing. In: Radespiel, R., et al. (eds.) Advances in Simulation of Wing and Nacelle Stall. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol. 131, pp. 351–366. Springer. ISBN 978-3-319-21126-8 (2016)
Landa, T., Radespiel, R., Wild, J.: Numerical Simulations of Streamwise Vortices on a Generic High-Lift Configuration. AIAA 2016-0304, San Diego (2016)
Landa, T., Wild, J., Radespiel, R.: Numerical simulations of streamwise vortices on a high-lift wing. CEAS Aeronaut. J. (2016). https://doi.org/10.1007/s13272-016-0217-0
Langer, S., Schwöppe, A., Kroll, N.: The DLR Flow Solver TAU—Status and Recent Algorithmic Developments. AIAA 2014-0080, National Harbor (2014)
Menter, F.R.: Zonal Two Equation k-\(\omega \) Turbulence Models for Aerodynamic Flows. AIAA 93-2906, Orlando (1993)
Probst, A., Radespiel, R.: Implementation and Extension of a Near-Wall Reynolds-Stress Model for Application to Aerodynamic Flows on Unstructured Meshes. AIAA 2008-770, Reno (2008)
Probst, A., Radespiel, R., Rist, U.: Linear-stability-based transition modeling for aerodynamic flow simulations with a near-wall Reynolds-Stress model. AIAA J. 50(2), 416–428 (2012)
Ritter, S.: Impact of different UHBR-Engine positions on the aerodynamics of a high-lift-wing. In: Radespiel, R., et al. (eds.) Advances in Simulation of Wing and Nacelle Stall. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol. 131, pp. 367–380. Springer. ISBN 978-3-319-21126-8 (2016)
Rudnik, R., Frhr. v. Geyr, H.: The European High Lift Project EUROLIFT II—Objectives, Approach, and Structure. AIAA 2007-4296, Miami (2007)
Rudnik, R., Reckzeh, D., Quest, J.: HINVA—High Lift INflight Validation—Project Overview and Status. AIAA 2012-0106, Nashville (2012)
Rudolph, P.K.C.: High-Lift Systems on Commercial Subsonic Airliners. NASA CR 4746 (1996)
Sclafani, A.J., Slotnick, J.P., Vassberg, J.C., Pulliam, T.H., Lee, H.C.: Overflow Analysis of the NASA Trap Wing Model from the First High Lift Prediction Workshop. AIAA 2011-866, Orlando (2011)
Smith, A.M.O.: High lift aerodynamics. J. Aircr. 12(6), 501–530 (1975)
Acknowledgements
The authors wish to acknowledge the German Federal Ministry for Economic Affairs and Energy (BMWi) for funding this research activity (grant number: 20A1301B). The views and conclusions contained herein are those of the authors and should not be interpreted as necessarily representing the official policies or endorsements, either expressed or implied, of the BMWi or the German government. Furthermore, the authors would like to thank the North-German Supercomputing Alliance (HLRN) for providing computational resources within the project nii00091.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Landa, T., Radespiel, R., Ritter, S. (2018). Simulations of Streamwise Vortices on a High-Lift Wing with UHBR-Engine. In: Dillmann, A., et al. New Results in Numerical and Experimental Fluid Mechanics XI. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol 136. Springer, Cham. https://doi.org/10.1007/978-3-319-64519-3_4
Download citation
DOI: https://doi.org/10.1007/978-3-319-64519-3_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-64518-6
Online ISBN: 978-3-319-64519-3
eBook Packages: EngineeringEngineering (R0)