Abstract
Classical methods for the inspection on a production line of circular profiles are characterized by a reduced flexibility, making them extremely expensive. This work provides a study on vision systems used for determining deviation from circularity of components used in mechatronics. The paper present a vision system that analyzes and processes the captured image of circular parts in an automatic mode in order to undertake the dimensional inspection. The proposed system has been tested for MR522ZEZO class miniature bearings. The inner diameter of MR522ZEZO bearing is 2 mm, which makes it unavailable for dimensional control by conventional methods. Experimental results show that the proposed system is able to perform an accurate dimensional control in automatic mode while ensuring high flexibility for distinct types and sizes of mechatronic components with circular profiles.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Golden, C.L.: Analysis of form errors in rings of non-uniform cross section due to workholding and machining loads. Paper for the Degree Master of Science in Mechanical Engineering, George W. Woodruf School of Mechanical Engineering Georgia Institute of Technology, May 2008
Malamas, E.N., Petrakis, E.G.M., Zervakis, M., Petit, L., Legat, J.D.: A survey on industrial vision systems, applications, and tools. Image Vis. Comput. 21, 171–188 (2003)
Mak, K.L., Peng, P.: An automated inspection system for textile fabrics based on Gabor filters. Robot. Comput. Integr. Manuf. Archit. 24(3), 359–369 (2008)
Ngan, H.Y., Pang, G.K., Yung, N.H.: Automated fabric defect detection – a review. Image Vis. Comput. 29, 442–458 (2011)
Psarakis, E.Z., Evangelidis, G.D.: An enhanced correlation-based method for stereo correspondence with subpixel accuracy. In: IEEE International Conference on Computer Vision, ICCV2005, vol. 1, pp. 907–912 (2005)
Gonzalez, R.C., Woods, R.E., Eddins, S.L.: Digital Image Processing, Using MATLAB (2004)
Feng, S., Chen, Q., Zuo, C., Asundi, A.: Fast three-dimensional measurements for dynamic scenes with shiny surfaces. Opt. Commun. 382, 18–27 (2017)
Canny, J.: A computational approach to edge detection. IEEE Trans. Pattern Anal. Mach. Intell. 8(6), 679–698 (1986)
Shen, H., Li, S., Gu, D., Chang, H.: Bearing defect inspection based on machine vision. Measurement 45, 719–733 (2012)
Chernov, N., Lesort, C.: Least squares fitting of circles and lines. Department of Mathematics University of Alabama at Birmingham Birmingham, AL 35294, USA, 1 February 2008
Acknowledgements
This work has been funded by University Politehnica of Bucharest, through the “Excellence Research Grants” Program, UPB – GEX. Identifier: UPB–EXCELENȚĂ–2016, Vision system for active dimensional control of mechatronic components in a production line, contract number 41/26.09.2016.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Ciobanu, R., Rizescu, D., Rizescu, C. (2018). Study on Inspection of Circular Parts Used in Mechatronics. In: Gheorghe, G. (eds) Proceedings of the International Conference of Mechatronics and Cyber-MixMechatronics - 2017. ICOMECYME 2017. Lecture Notes in Networks and Systems, vol 20. Springer, Cham. https://doi.org/10.1007/978-3-319-63091-5_23
Download citation
DOI: https://doi.org/10.1007/978-3-319-63091-5_23
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-63090-8
Online ISBN: 978-3-319-63091-5
eBook Packages: EngineeringEngineering (R0)