Abstract
The scope of this work is to apply exergetic simulation and performance investigation of 1–1 shell and tube heat exchanger using COMSOL Multiphysics simulation programme. Applying simulation to energy-intensive systems has great importance before the design phase as it gives the engineers the possibility to avoid energy loss and increase efficiency before constructing the device and experimenting it. Since the modelling and optimization is essential for better performance in thermal systems by including detailed computational fluid dynamics (CFD) and multiphysics, a broad parametric study is applied considering the operating parameters of inlet flow rates and temperatures of the fluids. Three-dimensional (3D) results for temperature, velocity and pressure profile for each case are determined and evaluated in a finely meshed structure. The results showed that the exergy destruction is minimized in high shell-side velocity temperature and low tube-side velocity temperature.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Assad, M.E.H.: Effect of maximum and minimum heat capacity rate on entropy generation in a heat exchanger. Int. J. Energy Res. 34(14), 1302–1308 (2010). doi:https://doi.org/10.1002/er.1674
Bi, Y., Wang, X., Liu, Y., Zhang, H., Chen, L.: Comprehensive exergy analysis of a ground-source heat pump system for both building heating and cooling modes. Appl. Energy. 86(12), 2560–2565 (2009)
Dincer, I.: The role of exergy in energy policy making. Energy Policy. 30, 137–149 (2002). doi:https://doi.org/10.1016/S0301-4215(01)00079-9
Dincer, I., Rosen, M.A.: Exergy, environment and sustainable development. In: Exergy, pp. 36–59. Retrieved from http://www.sciencedirect.com/science/article/B861F-4S0B2HH-7/2/65fba19d45e76abb9fc93178ec171a34 (2007)
Dincer, I., Rosen, M.A.: Exergy: Energy, Environment and Sustainable Development. Elsevier Science, Newnes (2012)
Ermis, K.: ANN modeling of compact heat exchangers. Int. J. Energy Res. 32(6), 581–594 (2008). doi:https://doi.org/10.1002/er.1380
Feng, X., Zhong, G., Zhu, P., Gu, Z.: Cumulative exergy analysis of heat exchanger production and heat exchange processes. Energy Fuel. 18(4), 1194–1198 (2004). doi:https://doi.org/10.1021/ef034068m
Fettaka, S., Thibault, J., Gupta, Y.: Design of shell-and-tube heat exchangers using multiobjective optimization. Int. J. Heat Mass Transf. 60(1), 343–354 (2013)
Hajabdollahi, H., Ahmadi, P., Dincer, I.: Exergetic optimization of Shell-and-tube heat exchangers using NSGA-II. Heat Transfer Eng. (2012). doi:https://doi.org/10.1080/01457632.2012.630266
Haseli, Y., Dincer, I., Naterer, G.F.: Optimum temperatures in a shell and tube condenser with respect to exergy. Int. J. Heat Mass Transf. 51, 2462–2470 (2008). doi:https://doi.org/10.1016/j.ijheatmasstransfer.2007.08.006
Kotas, T.J.: Exergy concepts for thermal plants. Int. J. Heat Fluid Flow. (1980). doi:https://doi.org/10.1016/0142-727X(80)90028-4
Kreith, E.F., Boehm, R.F.: The CRC Handbook of Thermal Engineering, pp. 1–90 (2000). doi:https://doi.org/10.1201/9781420050424
Mert, S.O., Dincer, I., Ozcelik, Z.: Performance investigation of a transportation PEM fuel cell system. Int. J. Hydrog. Energy. 37(1), 623–633 (2012)
Nafey, A.S.: Maximum entropy generation of in-series connected heat exchangers. Int. J. Energy Res. 24(7), 561–570 (2000). doi:https://doi.org/10.1002/1099-114X(20000610)24:7<561::AID-ER587>3.0.CO;2-D
Ordóñez, J.C., Bejan, A.: Entropy generation minimization in parallel-plates counterflow heat exchangers. Int. J. Energy Res. 24(10), 843–864 (2000). doi:https://doi.org/10.1002/1099-114X(200008)24:10<843::AID-ER620>3.0.CO;2-M
Özçelik, Y.: Exergetic optimization of shell and tube heat exchangers using a genetic based algorithm. Appl. Therm. Eng. 27(11–12), 1849–1856 (2007). doi:https://doi.org/10.1016/j.applthermaleng.2007.01.007
Sanaye, S., Hajabdollahi, H.: Multi-objective optimization of shell and tube heat exchangers. Appl. Therm. Eng. 30(14–15), 1937–1945 (2010)
Soria-Verdugo, A., Almendros-Ibrez, J.A., Ruiz-Rivas, U., Santana, D.: Exergy optimization in a steady moving bed heat exchanger. Ann. N. Y. Acad. Sci. 1161, 584–600 (2009)
Wang, S., Wen, J., Li, Y.: An experimental investigation of heat transfer enhancement for a shell-and-tube heat exchanger. Appl. Therm. Eng. 29(11–12), 2433–2438 (2009)
Wu, S.Y., Yuan, X.F., Li, Y.R., Xiao, L.: Exergy transfer effectiveness on heat exchanger for finite pressure drop. Energy. 32(11), 2110–2120 (2007)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG, part of Springer Nature
About this chapter
Cite this chapter
Mert, S.O., Badak, U. (2018). Exergetic Simulation and Performance Assessment of 1–1 Shell and Tube Heat Exchangers. In: Aloui, F., Dincer, I. (eds) Exergy for A Better Environment and Improved Sustainability 1. Green Energy and Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-62572-0_62
Download citation
DOI: https://doi.org/10.1007/978-3-319-62572-0_62
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-62571-3
Online ISBN: 978-3-319-62572-0
eBook Packages: EnergyEnergy (R0)