Abstract
It is known that a problem to amputees who lost a hand by accident or some type of illness, is the high cost yet little functionality of common hand prostheses. Often commercial prostheses are better, but not largely accessible. Nevertheless, we have recently observed a great number of hand prostheses pitched by open source projects. Despite, these prostheses are generally inaccurate and non-ergonomic to perform natural prehensions. In this study, we present the development of a hand prosthesis where geometric configuration was obtained from a scanned human hand. This procedure resulted in real dimensions and good proportions between fingers, palm and dorsum for the prosthesis. The grasps are performed by one servomotor to flex the fingers using cables and a pulley. The electromechanical system uses low cost components and can be controlled by the user’s voice. This achieved a functionality increase and better prehension effectiveness, as a consequence of anatomical form of the prosthesis. Due to the prototyping by material extrusion technology, a significant reduction in weight and construction costs was obtained.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kapandji, A.: The Physiology of the Joints, 2nd ed. British Library Cataloguing in Publication Data (2002)
Borg, J.: Assistive technology for children. In: UNICEF (ed.) The State of the World’s Children 2013 Children with Disabilities. UNICEF, New York (2013)
Borg, J., Lindström, A., Larsson, S.: Assistive technology in developing countries: a review from the perspective of the convention on the rights of persons with disabilities. Prosthet. Orthot. Int. 35(1), 20–29 (2011)
WHO: Guidelines on the Provision of Manual Wheelchairs in Less-Resourced Settings. World Health Organization, Geneva (2008)
WHO: Guidelines for Training Personnel in Developing Countries for Prosthetics and Orthotics Services. World Health Organization, Geneva (2005)
Ventimiglia, P.: Design of a Human Hand Prosthesis. Worcester Polytechnic Institute. Advisor Code: TP1 Project Code: RPAD (2012)
Stoppa, M.H., Carvalho, J.C.M.: Kinematic modeling of a multi-fingered hand prosthesis for manipulation tasks. In: Anais do Congresso Nacional de Matemática Aplicada à Indústria [= Blucher Mathematical Proceedings, vol. 1, no. 1], pp. 779–788, São Paulo, Blucher (2015)
Weir, R.: Design of artificial arms and hands for prosthetic applications. In: Standard Handbook of Biomedical Engineering and Design, Chap. 32. Ed. McGraw Hill, New York (2004)
Using your 3D Printer to make a difference. https://www.3dprinteros.com/enabling-the-future-using-3d-printer-make-difference/
Which Design? http://enablingthefuture.org/which-design/
Baril, M., Laliberté, T., Gosselin, C.: On the design of a mechanically programmable underactuated anthropomorphic prosthetic gripper. J. Mech. Des. 135, 1–9 (2013). ASME
Acknowledgments
The authors gratefully acknowledge all financial support by CNPq (MCTI-SECIS-CNPq-84-2013, proc. 458649/2013-9; DT-2 Productivity in Technological Development and Innovative Extension scholarships, proc. 308032/2016-0), FAPEG (MSc scholarship, proc. 201610267000812), and Universities UTFPR and UFG/RC.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Stoppa, M.H., Neto, G.F., Rezende, S.M., Foggiatto, J.A. (2018). Design and Development of a Bionic Hand Prosthesis. In: Rebelo, F., Soares, M. (eds) Advances in Ergonomics in Design. AHFE 2017. Advances in Intelligent Systems and Computing, vol 588. Springer, Cham. https://doi.org/10.1007/978-3-319-60582-1_52
Download citation
DOI: https://doi.org/10.1007/978-3-319-60582-1_52
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-60581-4
Online ISBN: 978-3-319-60582-1
eBook Packages: EngineeringEngineering (R0)