Abstract
The theory of measurement accuracy is a branch of metrology – the science of measurements. In presenting the theory we shall adhere, whenever possible, to the terminology given in the International Vocabulary of Metrology – Basic and General Concepts and Associated Terms [1]. We shall discuss the terms that are most important for this book.
References
Standards and Recommendations
International vocabulary of metrology – Basic and general concepts and associated terms (VIM), ISO/IEC Guide 99 (2007)
Guide to the expression of uncertainty in measurement, ISO (1995)
Standard Practice for Use of the International System of units (SI), American Society for Testing and Materials E 380–91 (1991)
Standard Practice for Dealing with Outlying Observations, American Society for Testing and Materials, E 178–02 (Reapproved 2002)
National Measurement Accreditation Service, B 3003, English National Physical Laboratory, Teddington (1986)
Measurement Uncertainty, American National Standard ANSI/ASME РТС 19.1–1985 (1985)
Standard Practice for the Evaluation of Single-Pan Mechanical Balances, American Society for Testing and Materials, E 319–85 (1985)
Publication 51, PT 1–84, Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories, 4th ed., Bureau Central de la Comission Electrotechnique Internationale, Geneva (1984)
Recommandation Internationale 34, Classes de precision des Instruments de Mesurage, Organisation International de Metrologie Legale, Paris (1974)
Process Instrumentation Terminology, American National Standard ANSI/ISA-51.1-1979 (R 1993) (1993)
Direct Measurements with Multiple Observations, Methods of Processing the Results of Observations: Basic principles, State Standard of the Soviet Union, GOST 8.207–76, Moscow (1976)
Metrology. Basic terms and definitions. Recommendation 29–99 [In Russian]. Interstate Council for Standardization, Metrology, and Certification (Izdatel'stvo Standartov, Minsk, 2000)
Propagation of Distributions Using a Monte Carlo Method. ISO/IEC Guide 98–3:2008/Supplement 1 to the “Guide to the expression of uncertainty in measurement”, ISO (2008)
Russian Standard R 8.764–11, State verification scheme for means of measuring electrical resistance (Standardinform, Moskow, 2013)
Books and Articles
V. Ya. Alekseev, F.M. Karavaev, Zn. F. Kudryshova, S.G. Rabinovich, Estimate of the measured quantity from results of measurements with different systematic errors. Metrologia (Supplement to the journal Izmeritel’naya Technika (The journal Izmeritel’naya Technika was published for many years in the United States in English under the title Measurement Techniques.)) 1, 18–24 (1978)
W. Bich, “How to revise the GUM ?”, Accred. Qual. Assur. 13, 271–275 (2008)
H. Bäckström, Uber die dezimalgleichung beim ablesen von scalen. Zeitschrift fur Instrumentenkunde (1930–32)
J. L. Bucher (ed.), Metrology Handbook (ASQ Quality Press, Wilwaukee, 2004)
I.E. Burns, P.J. Campion, A. Williams, Error and uncertainty. Metrologia 9, 101–104 (1975)
H. Cramer, Mathematical Methods of Statistics (Princeton University Press, Princeton, 1946)
C. Croarkin, Measurement Assurance Programs, Part II: Development and Implementation, NBS Special Publication 676–11 (U.S. GPO, Washington, DC, 1985)
G. D’Agostini, Bayesian Reasoning in Data Analysis. A Critical Introduction (World Scientific Publishing Co, River Edge, 2003)
B. Efron, R. J. Tibshirani, An Introduction to the Bootstrap (Chapman & Hall/CRC Press, 1998)
B.D. Ellis, Basic Concepts of Measurement (Cambridge University Press, Cambridge, 1966)
C. Eisenhart, Realistic evaluation of the precision and accuracy of instrument calibration systems. J. Res. Natl. Bur. Stand. 67C, 161–187 (1963)
Fluke, Calibration: Philosophy in Practice, Fluke Corporation, 2nd ed. Everett, P.O. Box 9090, WA 98206, (1994)
I.A. Grachev, S.G. Rabinovich, Approximate method for constructing the distribution function of the composite of several distributions. Ismeritel’naya Technika 1, 8–11 (1968)
V.A. Granovskii, Dynamic Measurements, Principles of Metrological Support [in Russian] (Energoatomizdat, Leningrad, 1984)
V.A. Granovskii, T.N. Siraya, Methods of Processing of the Measurements of Experimental Data [in Russian] (Energoatomizdat, Leningrad division, Leningrad, 1990)
R.V. Hogg, Some observations on robust estimation. J. Am. Stat. Assoc. 62(320), 1179–1186 (1967)
R. Kaarls, Metrology, essential to trade, industry and society. Accred. Qual. Assur. 12(8), 435–437 (2007)
R. Kacker, A. Jones, On use of Bayesian statistics to make the “Guide to the expression of uncertainty in measurement” consistent. Metrologia 40, 235–248 (2003)
A.M. Kagan, Yu.V. Linnik, On some problems of mathematical statistics in metrology, in Fifty Years of Metric Reform in the USSR, Proceedings of the Metrological Institute of the USSR [in Russian], D.I. Mendeleev All-Union Scientific-Research Institutes of Metrology, No. 123 (183) (Leningrad, 1970), pp. 39–47
F.M. Karavaev, Measurements of the Activity of Nuclides [in Russian] (Izd. standartov, Moscow, 1972)
Zn.F. Kudryshova, S.G. Rabinovich, Methods of experimental data processing in indirect measurements, in Methods of Experimental Data Processing in Measurements, Proceedings of the Metrological Institutes of the USSR [in Russian], D.I. Mendeleev All-Union Scientific Institute of Metrology, No. 172 (232), (Energia, Leningrad, 1975)
I. Lira, Evaluating the Measurement Uncertainty. Fundaments and Practical Guidance. With an introductory chapter by T.J. Quinn, Director of the BIPM (Institute of Physics Publishing, Bristol, 2002)
M.F. Malikov, Foundations of Metrology [in Russian] (Committee on Measures and Measuring Devices at the Council of Ministers of the USSR, Moscow, 1949)
B.S. Massey, Measures in Science and Engineering, Their Expression, Relation and Interpretation (Wiley, New York, 1986)
A.I. Mechanikov, Methods for immediate processing of the results of observations with the help of ordering statistics. Metrologia (Supplement to Izmeritel’naya Technika) 4, 47–58 (1972)
P.J. Mohr, B.N. Taylor, D.B. Newell, CODATA recommended values of the fundamental physical constants: 2010. Rev. Mod. Phys. 84, 1527–1605 (2012)
J.G. Nee, Fundaments of tool design, 4th ed. (Society of manufacturing engineers, Dearborn, 1998)
S. Rabinovich, Towards a new edition of the “Guide to the expression of uncertainty in measurement”. Accred. Qual. Assur. 12(11), 603–608 (2007)
S. Rabinovich, Accuracy of single measurements. Accred. Qual. Assur. 12(8), 419–424 (2007)
S. Rabinovich, Measurement Errors and Uncertainties: Theory and Practice, 3rd edn. (Springer, New York, 2005)
S.G. Rabinovich, An efficient calculation for indirect measurements and a new approach to the theory of indirect measurements, Proceedings of the Measurement Science Conference, Anaheim, California, January 25 and 26, 1996
S.G. Rabinovich, Measurement Errors [in Russian] (Energia, Leningrad, 1978)
S.G. Rabinovich, T.L. Yakovleva, Analysis of the temporal stability of the distributions of the errors of measuring instruments. Metrologia (Supplement to Izmeritel’naya Technika) 7, 8–15 (1977)
S.G. Rabinovich, Method for calculating the measurement errors. Metrologia (Supplement to Izmeritel’naya Technika) 1, 3–12 (1970)
L. Sachs, Applied Statistics: A Handbook of Techniques (Springer, New York, 1984)
K.P. Shirokov, Basic Concepts of Metrology, Proceedings of the Metrological Institutes of the USSR [in Russian], D.I. Mendeleev All-Union Scientific-Research Institute of Metrology No. 130 (190) (Izd. standartov, M.-L., 1972)
K.P. Shirokov, V.O. Arutyunov, E.M. Aristov, V.A. Granovskii, W.S. Pellinez, S.G. Rabinovich, D.F. Tartakovskii, Basic concepts of the theory of dynamic measurements, Proceedings of the 8th IMEKO Congress (Akademiai Kiado, Budapest, 1980)
V.M. Sviridenko, Logical-gnoseological aspect of the problem of the accuracy of measurements. Izmeritel’naya Technika1 5, 6–8 (1971)
B.L. van der Waerden, Mathematical Statistics (Springer, New York, 1969)
R. Willink, Measurement Uncertainty and Probability (Cambridge University Press, Cambridge, UK/New York 2013)
T.L. Yakovleva, About statistical homogeneity of the samples of measuring instrument errors. Metrologiya (Supplement to Izmeritel’naya Technika1) 2, 19–23 (1979)
I.P. Zakharov, S.G. Rabinovich, “A comparative analysis of methods of experimental data processing in uncorrelated indirect measurements” [In Russian]. Sistemy Obrobki Informatsii 1(91), 33–37., Kharkiv (2011)
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Rabinovich, S.G. (2017). General Concepts in the Theory of Measurements. In: Evaluating Measurement Accuracy. Springer Series in Measurement Science and Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-60125-0_1
Download citation
DOI: https://doi.org/10.1007/978-3-319-60125-0_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-60124-3
Online ISBN: 978-3-319-60125-0
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)