Abstract
Concrete durability is an inevitable consideration for sustainability of structures in aggressive environments. Therefore, the recent investigations are mainly based on the improvement of concrete durability such as resistance of concrete against acidic solutions attacks. This paper presents the experimental study on durability of concretes containing ordinary Portland cement (OPC), blast furnace slag (BFS) and natural pozzolan (NP) immersed in sulfuric acid solution. Mechanical properties and permeability of hardened concrete were determined by compressive strength and capillary water absorption tests. In addition, the durability properties and degradation intensity were studied through the measurement of weight loss, compressive strength loss and changes in ultra-sonic pulse velocity (USPV) in concrete specimens.
Results indicate that concretes containing supplementary cementing materials are more durable in acidic solution and incorporating higher volume of natural pozzolan could significantly improve performance of concrete against sulfuric acid attack. Besides, weight loss measurement was identified as a proper test method for indicating durability of concrete against sulfuric acid attack.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Alexander, M.G., Fourie, C.: Performance of sewer pipe concrete mixtures with portland and calcium aluminate cements subject to mineral and biogenic acid attack. Mater. Struct. 44(1), 313–330 (2011)
Allahverdi, A., Škvára, F.: Acidic corrosion of hydrated cement based materials. Ceram.-Silik. 44(4), 152–160 (2000)
ASTM C494/C494M: Standard Specification for Chemical Admixtures for Concrete. ASTM International, West Conshohocken, PA
ASTM C597-09: Standard test method for pulse velocity through concrete. ASTM International, West Conshohocken, PA (2009)
ASTM C618-12: Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM International, West Conshohocken, PA (2012)
ASTM C989/C989Â M-14: Standard specification for slag cement for use in concrete and mortars. ASTM International, West Conshohocken, PA (2014)
Aydın, S., Yazıcı, H., Yiğiter, H., Baradan, B.: Sulfuric acid resistance of high-volume fly ash concrete. Build. Environ. 42(2), 717–721 (2007)
BS EN-480-5: Standard specification for slag cement for use in concrete and mortars. British standards institution (1997)
Kelham, S.: A water absorption test for concrete. Mag. Concr. Res. 40(143), 106–110 (1988)
Monteny, J., De Belie, N., Taerwe, L.: Resistance of different types of concrete mixtures to sulfuric acid. Mater. Struct. 36(4), 242–249 (2003)
Rahmani, H., Ramazanianpour, A.A.: Effect of binary cement replacement materials on sulfuric acid resistance of dense concretes. Mag. Concr. Res. 60(2), 145–155 (2008)
Ramezanianpour, A.A.: Cement Replacement Materials. Springer Geochemistry/Mineralogy Publications, London (2014)
Senhadji, Y., Escadeillas, G., Mouli, M., Khelafi, H.: Influence of natural pozzolan, silica fume and limestone fine on strength, acid resistance and microstructure of mortar. Powder Technol. 254, 314–323 (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Ramezanianpour, A.A. et al. (2018). Effect of Supplementary Cementing Materials on Concrete Resistance Against Sulfuric Acid Attack. In: Hordijk, D., Luković, M. (eds) High Tech Concrete: Where Technology and Engineering Meet. Springer, Cham. https://doi.org/10.1007/978-3-319-59471-2_261
Download citation
DOI: https://doi.org/10.1007/978-3-319-59471-2_261
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-59470-5
Online ISBN: 978-3-319-59471-2
eBook Packages: EngineeringEngineering (R0)