Abstract
The penetration of solid state lighting applications is due to the promise of a low-cost reliable solution by means of application of low- and mid-power LEDs. These LED packages are manufactured by making use of new processes and materials which in principle introduces a series of known and unknown failure modes. Corrosion is a specific failure mode which limits the lifetime, and hence manufacturers realize that their package integrity needs to be improved. This chapter describes the sensitivity to corrosion of LED packages. In the first part, an introduction to chemical incompatibility is given. In the second part, different sources of corrosion are distinguished. The construction of LED packages and their vulnerability to corrosion is described in the third part. In the fourth part of this chapter, testing methods are reviewed and their effectiveness to simulate real-life conditions. A series of experimental setups is used to explore the behavior of LED packages in contaminated environments. A combined experimental–theoretical approach is used to describe the performance in certain conditions of pollution. This will be covered in the fifth part. The last part describes a list of classes of chemicals, often found in electronics and construction materials for luminaires that may affect LED performance and for this reason should be avoided for the design of SSL solutions.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
M.H. Chang, D. Das, P.V. Varde, M. Pecht, Light emitting diodes reliability review. Microelectron. Reliab. 52, 762–782 (2012)
S.D. Shepherd, K.C. Mills, R. Yaga, C. Johnson, J.L. Davis, in Proceedings of the SPIE 9190. New understandings of failure modes in SSL luminaires (2014)
R. Tuttle, LED System Lifetime and Reliability: LED Components, presented at Strategies in Light, Las Vegas 2015
JEP122F, Failure Mechanisms and Models for Semiconductor Devices, JEDEC Solid State Technology Association, South Arlington 2010
S. Watzke, P. Altieri-Weimar, in 2014 15th International Conference on Thermal, Mechanical, and Multi-physics Simulation and Experiments in Microelectronics and Microsystems. Degradation of silicone in white LEDs during device operation: a finite element approach to product reliability prediction (IEEE EuroSimE, Ghent, 2014)
M. Buffolo, C. De Santi, M. Meneghini, D. Rigon, G. Meneghesso, E. Zanoni, Long-term degradation mechanisms of mid-power LEDs for lighting applications. Microelectron. Reliab. 55, 1754–1758 (2015)
W.D. van Driel, X.J. Fan, Solid State Lighting Reliability: Components to Systems (Springer, 2012), 617 pages, ISBN 978-1-4614-3066-7
J.L. Davis, K. Mills, M. Lamvik, R. Yaga, S.D. Shepherd, J. Bittle, N. Baldasaro, E. Solano, G. Bobashev, C. Johnson, A. Evans, in Proceedings of the 2014 15th International Conference on Thermal, Mechanical, and Multi-physics Simulation and Experiments in Microelectronics and Microsystems. System reliability for LED-based products (IEEE EuroSimE, Ghent, 2014)
J.L. Davis, Solid-state lighting luminaire reliability, presentation at Delft University, Delft, 2014
J.L. Davis, Color shift in LEDs and SSL luminaires, presentation at the 2014 DOE Solid-State Lighting Manufacturing R&D Workshop, San Diego, 2014
M.Y. Mehr, W.D. van Driel, G.Q. Zhang, Accelerated life time testing and optical degradation of remote phosphor plates. Microelectron. Reliab. 54, 1544 (2014)
G. Lu, M. Yazdan Mehr, W.D. van Driel, X. Fan, J. Fan, K.M.B. Jansen, G.Q. Zhang, Color shift investigations for LED secondary optical designs- comparison between BPA-PC and PMMA. Opt. Mater. 45, 37–41 (2015)
Huang J, Golubović DS, Koh S, Yang D, Li X, Fan X, Zhang GQ, Rapid degradation of mid-power white-light LEDs in saturated moisture conditions. IEEE Trans. Device Mater. Reliab. 99 (2015)
J. Huang, D.S. Golubović, S. Koh, D. Yang, X. Li, X. Fan, G.Q. Zhang, Degradation modeling of mid-power white-light LEDs by using wiener process. Opt. Express 23, A966–A978 (2015)
Philips Lumileds, Luxeon Rebel Platform Assembly and Handling Information, Application Brief 20150330 (n.d.)
http://www.calce.umd.edu/TSFA/MFG.pdf , Mixed Flowing Gas Testing Introduction and CALCE MFG Capability
F. Jensen, Electronic Component Reliability (Wiley, 1995), ISBN 0-471-95296-6
W. B. Nelson, Accelerated Testing: Statistical Models, Test Plans, and Data Analysis (Wiley Series in Probability and Statistics) (1990), ISBN 0-471-52277-5
Osram, Preventing LED Failures caused by corrosive Materials, Application Note (2013), http://www.osram-os.com/Graphics/XPic1/00088375_0.pdf/Preventing
Samsung Electronics LED Business, Chemical guide of LED component (2013), http://www.samsung.com/global/business/businessimages/ led/file/product/lighting/201408/Application_Note_Chemical_Guide_for_LED_Component_Rev.1.3.pdf
Cree, Cree XLamp LEDs Chemical Compatibility, Support document CLD-AP63 rev 0A (2012), http://www.cree.com/led-components/media/documents/XLamp_Chemical_Comp.pdf
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this chapter
Cite this chapter
Jacobs, B.J.C., van der Marel, C., van Driel, W.D., Lu, S.J., Li, X.P. (2018). Corrosion Sensitivity of LED Packages. In: van Driel, W., Fan, X., Zhang, G. (eds) Solid State Lighting Reliability Part 2. Solid State Lighting Technology and Application Series, vol 3. Springer, Cham. https://doi.org/10.1007/978-3-319-58175-0_19
Download citation
DOI: https://doi.org/10.1007/978-3-319-58175-0_19
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-58174-3
Online ISBN: 978-3-319-58175-0
eBook Packages: EngineeringEngineering (R0)